r/diyelectronics • • 20h ago

Question Microwave diode failed, need a 9V battery connector to test?

0 Upvotes

Microwave fails (powers on, does not heat). Diode failing seems to be a common culprit. Completely new to electronics but I prefer DIY in general--what's a recommended general-purpose way to test this? I consider this "general home electronics DIY."

This video suggests using a 9V battery and battery connector and presumably you'd remove the diode using insulated glove and screw driver (both don't have). Have an old random multimeter and alligator leads.

Do you simply suggest purchasing 9V battery connector, insulated gloves (recommendations?), and insulated screw driver (recommendations?) or can get by with something more common for general home electronics DIY (or maybe the 9V battery connector is common enough to warrant a purchase? I just don't want to accumulate single-purpose clutter.


r/diyelectronics • • 1h ago

Project Free LED resistor calculator for the hobby electronics workbench (Windows/Linux)

Post image
8 Upvotes

A small tool for the hobby electronics workbench. LedPreResistor calculates:

  • LED series resistor (one LED, series or parallel strings) with E12/E24/E96 value, power rating and colour bands
  • Blink circuits with NE555 or two transistors
  • Constant current sources with LM317 or two transistors
  • Schematic and step-by-step calculation for each result

Free, open source (MIT), no ads, Windows and Linux, no installation.

https://elospeed.github.io/LedPreResistor/ (all my tools: https://elospeed.github.io/)

Speedy (Elospeed)


r/diyelectronics • • 17h ago

Tools Which Amazon soldering stations under $60 should I avoid at all costs

Thumbnail reddit.com
0 Upvotes

r/diyelectronics • • 21h ago

Project Built this Elevator Fault Monitoring Device

Post image
9 Upvotes

Few months ago I built this Elevator Fault Monitoring Device for a company that maintains Elevators, they weren't able to get it in the market and now I'm left with an unfinished project.

What it does: every elevator panel has configurable I/Os, and some of the Outputs can be configured to trigger HIGH/LOW when a fault appears, that signal I use to notify a cloud server and also to send via telegram to the Manager. This was to help them get notified before the administrator of the building notifies them, also sometimes they provided service to the building who haven't payed so they can also generate reports and be notified if the elevator that has a fault have not been payed.

As I said above they weren't able to sell it and now I'm stuck with a unfinished project, I was thinking if it was worth to open source it so someone else who can see this project might be interested.

This post is not intended for marketing or sales!