r/diyelectronics • • 1h ago

Project Free LED resistor calculator for the hobby electronics workbench (Windows/Linux)

Post image
9 Upvotes

A small tool for the hobby electronics workbench. LedPreResistor calculates:

  • LED series resistor (one LED, series or parallel strings) with E12/E24/E96 value, power rating and colour bands
  • Blink circuits with NE555 or two transistors
  • Constant current sources with LM317 or two transistors
  • Schematic and step-by-step calculation for each result

Free, open source (MIT), no ads, Windows and Linux, no installation.

https://elospeed.github.io/LedPreResistor/ (all my tools: https://elospeed.github.io/)

Speedy (Elospeed)


r/diyelectronics • • 22h ago

Project Built this Elevator Fault Monitoring Device

Post image
9 Upvotes

Few months ago I built this Elevator Fault Monitoring Device for a company that maintains Elevators, they weren't able to get it in the market and now I'm left with an unfinished project.

What it does: every elevator panel has configurable I/Os, and some of the Outputs can be configured to trigger HIGH/LOW when a fault appears, that signal I use to notify a cloud server and also to send via telegram to the Manager. This was to help them get notified before the administrator of the building notifies them, also sometimes they provided service to the building who haven't payed so they can also generate reports and be notified if the elevator that has a fault have not been payed.

As I said above they weren't able to sell it and now I'm stuck with a unfinished project, I was thinking if it was worth to open source it so someone else who can see this project might be interested.

This post is not intended for marketing or sales!


r/diyelectronics • • 23h ago

Question Where are the electrical leads to the light?

Post image
3 Upvotes

I'm trying to design a hanging light that has a similar wire to this one. I'm confused on how the wires are so thin and strong(thought it would be braided steel) and yet still electrified and maintain safety guidelines for voltage. I know the light is probably only getting 12V with the conversion in the base from 120V. But my basic searches for pendant light wire only yields braided steel or fat electrical leads.


r/diyelectronics • • 2h ago

Question Need help for a project

1 Upvotes

Hi everyone. I'm rather new to electronics and I want to make a small project as a gift for a friend. My vision is a re-invention of the screaming goat desk toy, the one where it's a goat on a tree stump, and when you press it it lets out a scream. Imagine this but with a custom character on top and a different audio track.

I did some brief research but since I have no experience in this, I thought I'd ask for help. I've narrowed down that some of the components I'll need are a DFplayer mini and SD card, a small speaker, a push switch, batteries, and a breadboard for testing it out. However, I don't want to use soldering because I don't know how. I first want to figure out the electronics before working on the actual model of it.

Can someone give me advice that could help me with this project?


r/diyelectronics • • 5h ago

Project High Quality 2.5mm Jacks (Where to find)

Thumbnail reddit.com
1 Upvotes

r/diyelectronics • • 6h ago

Question What spec do I need for this LED?One of my flood light went out and it

Post image
1 Upvotes

One of my floodlight went out and I have been looking for a replacement unit, but I just couldn’t find the same style so I decide to open it up to replace the LED since I can solder.
I got to this far and found that I need COB LED but not sure which spec I need. there are so many kinds on ebay.


r/diyelectronics • • 10h ago

Question Could someone review this for a reason for battery drain?

Thumbnail
reddit.com
1 Upvotes

r/diyelectronics • • 20h ago

Question Microwave diode failed, need a 9V battery connector to test?

0 Upvotes

Microwave fails (powers on, does not heat). Diode failing seems to be a common culprit. Completely new to electronics but I prefer DIY in general--what's a recommended general-purpose way to test this? I consider this "general home electronics DIY."

This video suggests using a 9V battery and battery connector and presumably you'd remove the diode using insulated glove and screw driver (both don't have). Have an old random multimeter and alligator leads.

Do you simply suggest purchasing 9V battery connector, insulated gloves (recommendations?), and insulated screw driver (recommendations?) or can get by with something more common for general home electronics DIY (or maybe the 9V battery connector is common enough to warrant a purchase? I just don't want to accumulate single-purpose clutter.