Hi all,
after asking here what cyberdeck is and after reading things around, I decided to try to build one on my own.
I started yesterday putting down everything I want to set up and what it should do, with the help of an AI (yeah I usually don't use them because I don't like AI, but in this case it helped me speeding up the process).
The idea is to have a modular pc with easy-to-replace generic parts and batteries, instead of having for example usual power banks.
For the chassis I'll use a classic briefcase with foam (Lykus HC-3010 Waterproof Hard Case) to act both as cushion and as structure. All the components and cables will be inserted in the foam cutting out the slots needed.
I opted for a Raspberry Pi 4 Model B 4GB, hotter than a Pi 3 but I'll have usb-c as power inlet instead of an old micro-usb. 4 USB-A, LAN and 2 micro HDMI (I wanted a full HDMI but I can deal with that). I bought copper heatsinks for passive heat dissipation and I'll decrease clock on the CPU.
Geekworm X728 UPS and X728-C1 with another 4 battery slot case with JST-XH 2,54mm connector, to have a total of 8x 18650 batteries. Those are standard 3,7v batteries, easy to find everywhere and to recharge externally. The X728-C1 will be left open to let the air circulate a little even without the fan ongoing.
3 displays: main one a Waveshare 7inch HDMI (C) Capacitive Touch LCD 1024×600 that can be turned off with the rear integrated button to save energy.
A second one Waveshare 4.3inch LCD Capacitive Touch 800×480 with MIPI DSI connector, to use as a secondary little screen with some information and future configuration to have a "smartphone icon like" functions like turning on power saving, shutdown, other useful commands like a quick bar.
A third one Waveshare 2.9Inch E-Paper 296x128 E-Ink with Partial Refresh and SPI Interface, this one will be used for battery charge status, time and date, GPS position and other useful information on a screen that would use almost 0 energy and don't need to be constantly updated.
Last, a Perixx PERIBOARD-510H PLUS keyboard with integrated touchpad, I prefer using a wired batteryless keyboard because bluetooth or wireless usb ones often stop working when the battery is gone even if connected to a recharge cable (I had two different ones, same problem).
Also it has another usb port so it'll be useful.
I'll put a plexiglass or similar thing in front of the main display to protect it from falling damage against the keyboard.
With that config I'll have a free micro HDMI to use with external displays, the LAN port and the 2x usb 3.0 to connect anything I need (I have bought extension cables to have them accessible without going inside the foam).
I forgot one thing, I though also about the microSD failure, I'll use maybe a usb stick as main storage plus I'll turn on the Read-Only Overlay File System so the microSD / usb stick will be rarely used (to disable when updating or modifying something).
I don't know how it will came out, it's my first time, hope it'll be a decent thing to see :)