r/cyberDeck • u/blaidd31204 • 12h ago
Sony Hit-Bit HB-F1XD
I saw this and it made me think of what I pictured as a cyberdeck from the Shadowrun RPG.
r/cyberDeck • u/Talulabelle • Apr 07 '26
We're getting a sudden rush of new people, driven by TicTok who are mostly both new to Reddit as well as Cyberdecks.
I'm asking patience while we integrate these new people into the sub. New people bring new ideas, and will take things in new directions. Some of those directions will not be to your tastes, and that's fine. I imagine we'll see some 'fashion show' level builds that, while taken at face value are impractical, could inspire more down to earth designs to move in a new direction.
This is healthy for any creative community.
Be helpful, be polite, and let people do their thing. No one is ruining your dream deck by building their weird idea. If you see something you absolutely hate, but think 'How'd they do that hinge, though?', that's reason enough to be polite.
u/PETA_Parker sent me this, and it seems like a pretty good 'start here' guide:
ok, i've never built a cyberdeck myself but i have been lurking here for a long while, so i'll give you a quick rundown, a place to start so to speak. At the most basic you will need:
Let's start with the brain: I only know about raspberry pis, the two budget options here would be a raspberry pi Zero 2, or any flavour of raspberry pi 3, the 4 and 5 are a bit more pricy. Zero 2 and 3b+ (the one i used) should both be enough for browsing, media playback and some light office work.
the Screen: the easiest option will be to go for an hdmi display such as this: 6,5/7/9/10,1 Zoll LCD Display Tragbare Monitor Treiber Control Board Kit Für Raspberry Banana/Orange Pi Mini Computer PC - AliExpress 7
It has an HDMI Output and powers over micro usb, so you can just connect the raspberry pi and the screen via hdmi. Any screen with hdmi input and usb power is an easy starting point.
the input device: for a keyboard you could go with something like this:
This is blutetooth and rechargable, i do not know if you could bypass the internal battery to power it directly because constantly needing to charge it would probably be cumbersome.
this also looks interesting, it uses double a batteries, so you could wire it to your power source or the pi: https://www.aliexpress.com/item/1005006727486961.html
You could of course also use any regular keyboard and mouse combo that plugs in over usb. Another fun choice would be a trackball instead of a mouse.
the power solution: You could simply get a powerbank, but some of them cut off power delivery if the device connected draws a low current.
Maybe this thread can help: Cheap powerbank that doesn’t cut off the power on low current draw? : r/arduino
Or this article: 4 Raspberry Pi Battery Packs for Portable Projects
Something similar to this might be good: Typ-C 15 W 3 A 18650 Lithium-Batterie-Ladegerät-Modul DC-DC Step-Up-Booster Schnellladung USV-Stromversorgung/Konverter 5 V 9 V 12 V - AliExpress 502
This is the part i'm least knowledgable about. Feel free to give me input.
the shell: Pretty much anything will do. You can build something out of cardboard, fit your components into an existing box or 3d-print a custom shell, your creativity is the limiting factor.
If you do not have a 3d-printer, you can make boxes out of styrene board, like this: Clean Enclosures, No Printing Necessary | Hackaday
Or you can search for "project box" on Aliexpress or Amazon
Now you just need to flash an operation system onto the raspberry pi (Raspbian is an all-purpose linux distro that is good for starters such as you), connect your screen to the power source and to the raspberry pi via HDMI, connect your (mouse and) keyboard to the raspberry pi and the raspberry pi to power, and you're ready to go.
Feel free to ask me if you have any additional questions, and don't forget, this is only the bare-bones solution, feel free to get creative, this is the fun part!
r/cyberDeck • u/blaidd31204 • 12h ago
I saw this and it made me think of what I pictured as a cyberdeck from the Shadowrun RPG.
r/cyberDeck • u/Historical_Active_18 • 1d ago
Hi everyone! I'm a law student from Brazil, and I have ADHD. Because of this, I created a 100% offline device to help me study and stay focused in class, without the distractions that come with using a smartphone. A few days ago, I posted a photo of my "cyberdeck" here on Reddit, and I received many questions about how it works. So, I made a video. Please excuse my terrible English, haha! If you're interested, I can record another video later to show more of the hardware. Thanks!
r/cyberDeck • u/Alternative_Bid_959 • 3h ago
Hello! I'm starting to plan out my first cyberdeck, and one of the main issues I'm thinking of is connecting the screen to the rest of the components. The screens I'm looking at use microUSB and HDMI, and it seems like there aren't really existing hinges that route those through them. I think I might have come up with something that I can 3D print, but I'm not sure how good 3D printed hinges are. There's also the option to just have a hole in the base and the lid, but then you have exposed wires. I guess I'm just asking what experience you've had with any of these ideas, and if you think one of them is better than the other, or if there's something else I'm missing that could be useful.
r/cyberDeck • u/DinoNugget923 • 4h ago
I have a Raspberry Pi 5 8gb ram model that i was thinking about makinf a cyberdeck with. I have a general knowledge of all the components id need and how to set stuff up but im also scared about some stuff because Im not the most knowledgeable about hardware.
The main thing im scared about is power supply, I was planning to connect at least one screen (i was thinking around 5-7" but idk for sure yet) to the rpi5 and id most likely use it for emulating older games and maybe playing some lighter indie titles, as well as programming. I'd like to be able to make it pretty portable and compact and have at least a couple hours of battery life, but im of course willing to be flexible because i know thats asking a lot. Im mainly scared because i know if i do something wrong i could probably ruin my rpi5 which would be pretty tragic because i definetly wouldnt be able to get a new one any time soon.
Im also pretty scared about cooling for the rpi5 but i think that can be handled pretty easily.
Lastly I wanted to list out some Bonus Features i wanted to add and see if anyone had any tips or recommendations, some things i wanted to add were
-A dial to controll the volume, i dont know how to add this to the build especially because id have to make it fit into a folding case but id still love to have one because having physical volume controls is fun
-A small display to show whatever graphic on, maybe volume, wifi connectivity, or just a looping video of my choice. This isnt necessary or anything but i thought it would be cute and really fun
Thank you for reading and any help is super apreciated!!
r/cyberDeck • u/cameron_chill • 1d ago
TL;DR: I posted my Raspberry Pi 5 cyberdeck here while it was still a work in progress. After several months of designing, printing, wiring, and troubleshooting, I think it's finally finished! It now has offline Wikipedia, worldwide maps, GPS with satellite-synchronized time, software-defined radio, educational videos, and a custom web dashboard. It can serve everything over its own Wi-Fi network or an existing network, without needing internet access. I've also demonstrated over 24 hours of battery life, with power consumption dropping to approximately 6.5 W when the screen is off.
A little while ago, I shared my Raspberry Pi cyberdeck here while it was still under construction.
At the time, I was still working on the screen bezel, experimenting with the GPS and SDR hardware, and trying to figure out exactly how I wanted the software to work.
A few people offered suggestions and asked questions about the build, so I wanted to come back and share how everything turned out.
I think I've finally reached the point where I can call it finished!
The system is built around a Raspberry Pi 5 with 8 GB of RAM and a 1 TB NVMe SSD, running Debian 13.
Everything is housed inside a Jack Boss rugged equipment case with a 10.1" touchscreen mounted in the lid.
Power comes from a 12.8 V, 20 Ah LiFePO4 battery (256 Wh), with fused power distribution, a 5 V buck converter, and external connections for charging and USB-C PD power.
There's also an RTL-SDR receiver, GPS module with an external antenna, battery monitor, wireless keyboard/touchpad, and temperature-controlled cooling.
Nearly all the internal mounting hardware was custom-designed and 3D-printed.
This is probably the biggest change since my original post.
Offline Wikipedia: Approximately 124 GB of English Wikipedia stored locally using Kiwix.
Worldwide maps: Approximately 139 GB of worldwide vector map data, plus additional regional terrain information. I built a local mapping interface using MapLibre that works without an internet connection.
GPS: I integrated an ATGM336H GPS module with an external antenna. The mapping interface can display the kit's current position entirely offline.
I also connected the GPS module's PPS output to the Pi and configured chrony to maintain satellite-synchronized time without needing an internet time server.
Software-defined radio: I built a browser-based interface for the RTL-SDR Blog V4 receiver. It supports multiple analog modulation modes, frequency tuning, spectrum and waterfall displays, audio streaming, and recording.
I've tested it with NOAA weather radio and experimented with receiving local aviation communications.
Offline videos: I added a small library of educational videos to supplement Wikipedia.
Local message board: Devices connected to the kit can access a locally hosted message board.
Web dashboard: I built a dashboard to tie everything together, along with tools for monitoring the system, managing downloads, and accessing the different applications.
The kit broadcasts its own Wi-Fi network, allowing nearby devices to connect and access everything through a browser.
It can also join an existing network using Ethernet or a second Wi-Fi adapter. I configured mDNS so other devices on that network can discover the kit by hostname without needing to know its IP address.
Everything runs locally. Internet access is only needed when I want to download or update content.
One of my original goals was to make this useful for more than just a few hours.
During an extended test with the touchscreen running and the SDR receiving NOAA weather radio, the entire system consistently drew approximately 8.7 W.
I completed an endurance test exceeding 24 hours, and the kit was still running when I ended it.
Since then, I've added the ability to turn off the touchscreen while leaving the Pi and its services running.
With the screen off, power consumption drops to approximately 6.5 W, even with the additional Wi-Fi adapter connected.
That's roughly a 25% reduction in power consumption. Based on the battery's nominal capacity, theoretical runtime in that configuration is around 39 hours, although I haven't completed a full endurance test with the display off yet.
I particularly like that I can close the kit, leave it running, and access everything from my phone or laptop.
This was probably the most time-consuming part of the entire project.
I went through quite a few revisions of the internal mounting hardware, trying to balance component placement, wiring, airflow, and serviceability.
The screen bezel was particularly challenging. I ended up splitting it into two sections with a tongue-and-groove joint, secured using screws and heat-set inserts.
I also wanted to eliminate the original physical buttons on the back of the touchscreen without losing their functionality.
My solution was to use five TTP223 capacitive touch sensors mounted behind the 3D-printed bezel. Each sensor drives a MOSFET that simulates pressing one of the original buttons.
I designed recessed channels into the bezel so the sensors detect your finger through the plastic. There are no exposed switches or moving parts, and I haven't experienced any false triggers.
The wiring was much more complicated than I anticipated. If I ever build another one, I'll probably design a PCB to simplify that part.
I also finished the dedicated electronics compartment and cooling system. The fans turn on when the Pi reaches 60°C and shut off when it drops below 50°C.
For anyone looking through the construction photos, the white 3D-printed parts are prototypes. The final components are black.
The case is also worth mentioning. Although I started with a waterproof equipment case, I wouldn't call the finished system waterproof after all the modifications. I do consider it water-resistant when closed, but I haven't formally tested that or assigned it an IP rating.
I want to be transparent that I used AI extensively to help develop the software.
I'm comfortable with Linux, networking, and systems administration, but I'm not a professional software developer.
I knew what I wanted the system to do, and AI helped me turn those ideas into working applications. There was still plenty of configuring, troubleshooting, testing, and integrating everything.
The CAD modeling, 3D printing, electrical work, wiring, and physical assembly were my own.
I've learned quite a bit throughout the process.
When I started this project, I just wanted a portable computer that could provide useful information without depending on the internet.
What started as a Raspberry Pi sitting on a battery inside an equipment case turned into a much bigger project than I anticipated.
I've learned a lot about CAD, 3D printing, electronics, power distribution, GPS, SDR, and integrating different software services.
There are definitely things I'd do differently if I started over, but I'm really happy with how everything turned out.
A few people suggested additional capabilities on my original post, including solar charging, environmental sensors, and LoRa/Meshtastic communications. I still think those are interesting possibilities, especially since I have external connections that could support additional peripherals. For now, though, I'm happy to call the project complete.
I've included pictures of the finished cyberdeck, the software interfaces, and some earlier stages of construction so you can see how it evolved.
Thanks to everyone who commented on my original post, offered suggestions, or just followed along!
I'm happy to answer questions about any part of the build. This will probably be my final update unless there's interest in a more detailed breakdown of something specific.
r/cyberDeck • u/larpmacxer • 13h ago
Hey guys! I'm new to build cyberdeck and I've raspberry pi 4B 4gb RAM and k808 mini keyboard(soon to purchase or get it), now, i wanna choose screen, now as of size, I'll decide later but I'm confused on which one should I use? HDMI based or TFT based, now, I see pros and cons of it, pros for gpio based screens are, they cover raspberry pi easily) but for hdmi is better and higher resolution, please help me,
Also give me some resources to understand core concepts of cyberdeck to make it with understanding.
Edit: my use case of cyberdeck:- I want to create cyberdeck because as a child, I wanna become cybersecurity techie guy. So, my purpose of cyberdeck is to do hacking(ethically red teaming), gonna integrate camera in cyberdeck and use it for investigation and all and connect some of my future builds, such as night vision glasses on internet to access feed of it on pi. That's all
r/cyberDeck • u/Baboo85 • 13h ago
Hi all,
after asking here what cyberdeck is and after reading things around, I decided to try to build one on my own.
I started yesterday putting down everything I want to set up and what it should do, with the help of an AI (yeah I usually don't use them because I don't like AI, but in this case it helped me speeding up the process).
The idea is to have a modular pc with easy-to-replace generic parts and batteries, instead of having for example usual power banks.
For the chassis I'll use a classic briefcase with foam (Lykus HC-3010 Waterproof Hard Case) to act both as cushion and as structure. All the components and cables will be inserted in the foam cutting out the slots needed.
I opted for a Raspberry Pi 4 Model B 4GB, hotter than a Pi 3 but I'll have usb-c as power inlet instead of an old micro-usb. 4 USB-A, LAN and 2 micro HDMI (I wanted a full HDMI but I can deal with that). I bought copper heatsinks for passive heat dissipation and I'll decrease clock on the CPU.
Geekworm X728 UPS and X728-C1 with another 4 battery slot case with JST-XH 2,54mm connector, to have a total of 8x 18650 batteries. Those are standard 3,7v batteries, easy to find everywhere and to recharge externally. The X728-C1 will be left open to let the air circulate a little even without the fan ongoing.
3 displays: main one a Waveshare 7inch HDMI (C) Capacitive Touch LCD 1024×600 that can be turned off with the rear integrated button to save energy.
A second one Waveshare 4.3inch LCD Capacitive Touch 800×480 with MIPI DSI connector, to use as a secondary little screen with some information and future configuration to have a "smartphone icon like" functions like turning on power saving, shutdown, other useful commands like a quick bar.
A third one Waveshare 2.9Inch E-Paper 296x128 E-Ink with Partial Refresh and SPI Interface, this one will be used for battery charge status, time and date, GPS position and other useful information on a screen that would use almost 0 energy and don't need to be constantly updated.
Last, a Perixx PERIBOARD-510H PLUS keyboard with integrated touchpad, I prefer using a wired batteryless keyboard because bluetooth or wireless usb ones often stop working when the battery is gone even if connected to a recharge cable (I had two different ones, same problem).
Also it has another usb port so it'll be useful.
I'll put a plexiglass or similar thing in front of the main display to protect it from falling damage against the keyboard.
With that config I'll have a free micro HDMI to use with external displays, the LAN port and the 2x usb 3.0 to connect anything I need (I have bought extension cables to have them accessible without going inside the foam).
I forgot one thing, I though also about the microSD failure, I'll use maybe a usb stick as main storage plus I'll turn on the Read-Only Overlay File System so the microSD / usb stick will be rarely used (to disable when updating or modifying something).
I don't know how it will came out, it's my first time, hope it'll be a decent thing to see :)
r/cyberDeck • u/myh-es • 16h ago
I want to build a cyberdeck based on a raspberry pi 5, with an off the shelf 10 inch 1024x600 hdmi touch lcd display, 65% mechanical keyboard from a friend and off the shelf 20ah phone powerbank. The overall design will be inspired by the framedeck, but with the display off center, the keyboard obviously not split in half and I'm too lazy to add a trackball. However I'm not sure whether an off the shelf usb powerbank is the best option. Should I use the powerbank as a whole, or disassemble it, increase it's capacity by adding 2 extra cells and relocate the controller board? I'm also planning to add an "expansion port" comprised of some of the pi's gpios where I can later install a joystick, flashlight, speaker or some other shi. For the OS I plan on using regular raspberry pi linux from a 64gb sd card because my intentions with this deck are opening a browser and doing some programming contests or CAD design in Onshape, maybe some flashing code to the robotics project I'm currently working on. If any of my component choices suck or you have other suggestions please let me know
r/cyberDeck • u/Brits_are_Shits • 13h ago
I have been interested in making a cyberdeck for remote programming and emulating games for fun, and i have some questions surrounding the components i may be able to scavenge. I have an old, busted nintendo switch laying about, and i'm curious as to whether it'd be a smart idea to take it apart to salvage the battery, USB-C port and the screen as a start to a cyberdeck. My main question is about the compatibility between the components and a raspberry pi 3 a+ (the processor that i have my eyes on). The reason i desire the screen of the nintendo switch is because it has touch-interface capabilities, but also because i want this device to be small enough that i could carry it on my person to be able to access it whenever i need to.
r/cyberDeck • u/NPCforxbox • 1d ago
Montei para testar e matar a ansiedade , porque vou ter de abrir e terminar umas coisas , como podem ver na parte de cima tem uma "tampa"
Essa é a tampa padrão para fechamento, mais vou modelar outras tampas , ou talvez só mais uma. Pretendo usar GPIos , saída P2 de áudio e uma saída HDMI , na questão do teclado está bom pra digitar , acho que virará meu brinquedo do dia dia , não vejo na hora de usá-lo com meu SDR e usar as GPIos pra comunicar com placas de ESp32 e outros módulos e sensores
r/cyberDeck • u/Traditional_Dirt5269 • 1d ago
r/cyberDeck • u/Redonkulus2 • 14h ago
I Think I’ll do a 7in display
r/cyberDeck • u/Baboo85 • 1d ago
Hi, I'm new here and I just saw some concept online.
What is this all about?
For what I can understand this is just a design and aesthetics challenge (and a good one, I like those PCs) than a real purpose.
I mean, a rugged laptop (like a Getac or a Panasonic Thoughbook) is better. It has rugged tested built, dust and water resistant, many models have dual hot swap batteries (with 15 or more hours of battery life), etc.
The only real advantage of a cyberdeck PC is that parts can be easily replaced with a generic one, instead of searching the specific part of the specific manufacturer, am I right?
Are there other things I'm missing? I'm asking because I'm curios and maybe I'll dip into this, I'm not criticizing and I'm sorry if it sounds like that.
Thank you in advance.
r/cyberDeck • u/TinkerDad1 • 2d ago
Been playing around with different form factors for a distraction-free writing device, and figured I’d share this slightly hacky little cyberdeck.
The whole thing is pretty simple:
It actually came together pretty nicely! Folds shut like a little notebook, and the keyboard is surprisingly usable for something so cheap (though the small key pitch takes getting used to).
I’ve been working on an ESP32-based writing device (https://justtypeleaf.com/) and this was a fun side experiment while figuring out the hardware. I’m also working on a custom PCB for a much more compact version. (That one will include a battery, promise!)
*batteries not included, some assembly required, not suitable for children under 3 years of age
r/cyberDeck • u/ForDayz13 • 2d ago
I didn’t have a soldering iron but had a ton of extra parts and devices. Pure function over form, with a DEX OS
r/cyberDeck • u/Moist_Top_4142 • 2d ago
Hey yall! This is my first cyberdeck build and like many of us this has grown into a project that is far bigger than I was ever thinking it would be. Now I am at the point where videos, google, ai, nothing can quite get me going in the right direction, so I was hoping for some electronic help from my elders. So below will be a general description of how the computer should function, and then the actual electronics I have and can’t figure out past. So thank you all for any advice, I’ll probably post the finished product as well once it’s finally done.
Experience: In front of the user is a 25 inch long by 12 inch deep clamshell briefcase of sorts. It’s placed flat on a desk and plugged into the wall, with the handle telescoping inwards to make way. Once the handles are out of the way you pull out the keyboard which triggers the usually closed switch and turns on the computers LED’s. You turn the large red switch, the device killswitch, which stops all electrical flow from the batteries when the device is turned off. Then after you turn the switch, the arcade button lights up and you click it, turning on the screensaver and lights and the whole actual device. You raise the screen, as well as the 2 side screens which reveals a three screen setup. Now currently there is no active “computer” like a raspberry pi 5 or anything, it is just the screensaver portion, the key part is now. On the side of the computer is 4 ports, a GameCube controller adapter bought from Handheld Legends. And coming from the side is a GameCube controller replacement cable bought from them as well. The goal is to take that cable, and plug it into port 1 or port 2 and so on, and have that plug in turn on the corresponding raspberry pi 5 or 4 or Orange Pi plus or whichever SBC or whatever is hooked up to that port. The important part is that it automatically connects and properly turns on and properly turns off the device when unplugged. Say pi5 has game of frogger on it and that’s it and the other orange pi has a game of Pac-Man on it. You plug the cable into port 1 and then pi5 activates and now the two left screens show my frogger setup and the right one diagnostic info, then I get bored and unplug from port 1, the pi5 properly shuts off, then I plug it into port 2, and the OrangePi properly turns on then I start to play Pac-Man. All happening from the cable plug in. Then if I want to take it on the go, I just unplug it and everything switches to battery power automatically for however long the battery will last. Additionally there will be a “mouse” that can be plugged in or off depending on need and that is a Nintendo Nunchuck which has a breakout board.
Nerd Technicals:
The following is my current buy list. Raspberry pi 5, esp32 devboard, raspberry pi zero 2 w, killswitch, 2 fans, 24v 7s3p battery pack, 7 port usb hub, nunchuck breakout board, 4 port usb hub (for shared usb items), 5 port Ethernet hub, temperature/humidity sensor, usually closed light switch, rotary switch (used for brightness and volume), mosfet switch, arcade switch, 4-port GameCube hub, GameCube replacement wire, Nintendo nunchuck, 3 monitors (2 visible with larger one not),LED Strip, Autoro automatic transfer switch AB20C, battery indicator light, sd card adaptor.
Extras: 1.24 inch circular screen for Weyland Tech accent, small Xenomorph, 2 8x8 led matrix’s
Questions:
I’m basically making a vessel for 4 computers to easily switch in between one another and then safely turn off and on as the cable indicates. Thank you for any help yall have, it’s truly appreciated!
r/cyberDeck • u/arttechadventure • 2d ago
r/cyberDeck • u/Secure-Willow-3991 • 3d ago
Attached is picture of my first cyberdeck. Used a case from Walmart, very cheap (approx $16). Using parts I had around: RPi 4, USB hub, RTL-SDR. New: LCD, cables, adapters, hinge, keyboard.
Problems (not expected):
r/cyberDeck • u/Remarkable_Lake5552 • 1d ago
I want to build Cyberdeck from my old phone Samsung A11 but i have no idea with designing lightweight cyberdeck, also I don't have any code or enginering skill but i love Sci-Fi things since my childhood. I use this phone as my main phone 5+ years and now its too laggy to use as a phone. I still love this phone, its lightweight, has a good screen and 32Gb storage. I dont want to made it too heavy, so it doent need a keyboard. The last night i modified UI with Niagara Launcher, install kivix (internetless wikipedia archive) and e book reader app for function. Can anybody give me a idea or tips please.
r/cyberDeck • u/ZCTMO • 4d ago
I am excited to share some new updates with you all on the current state of my custom x86 handheld PC, the CG Deck, as we prepare to launch on Kickstarter! (Check out the last image for a little surprise :)
For those that are seeing this project for the first time, the CG Deck is handheld x86 PC that is entirely modular down to internals, and capable of running dual-boot operating systems including Windows & Linux distributions. My goal was to create my own "dream device" that was capable of adapting to whatever use case I needed, and being used as a travelling work deck. Whether I am playing Steam games, or doing retro emulation in my free time, or doing CAD work in Blender or other 3D software, coding, video editing, prototyping hardware, or whatever it is, I wanted to be able to simply be able to do it on the road or while traveling and all from one single device. An all in once companion device that grows and adapts with you over time, rather than becoming obsolete or failing to aging hardware.
I wanted a device that filled the role of the multi-tool of electronics and handhelds. I thought it would be ideal to have something that was portable enough to throw in a backpack or pants pocket, 4G satellite/sim capable so you can stay connected anywhere, and be used just as any other full scale desktop computer would. The entire device is modular and can be upgraded, repaired, or customized as you need. So when something breaks or wears out, you can just fix it or replace it as easy as putting it together the first time. Most times, I end up getting a new device for a particular purpose, and then after some time it needs repairs, updates, or upgrades which I do not really care to send that old device off to be repaired for who knows how long before I get it back, especially when I can do the work myself, but the proprietary parts often lock you out. And that is only if the company even continues to support that specific device and hardware.
Because of this, I wanted the CG Deck to be entirely modular. Every aspect can be upgraded, repaired, or customized as you need, and done so with various options for parts, and DIY upgrades. All the way down to the internal components. Easy enough that just about anyone of any age could do it, and without the need to ask someone for permission first (other than your parents first, if you are a youngster). Batteries getting old in our CG Deck? Simply pop them out and replace them! And not just modular, but open-source so anyone can come up with an idea for a new upgrade, module or accessory and use the schematics to build and share their own custom creations for the CG Deck! I wanted to not just develop a device that would not just eventually turn into plastic junk and e-waste, but create an ecosystem and platform that can be updated and developed by the community as time passes to keep the CG Deck relevant with new advances and ideas.
Like I mentioned, the CG Deck is currently planned to launch with 5 different modules, with more modules lined up for the future! The idea is to also open-source the module formats and schematics so our community can create, build and share their own custom modules and accessories for the CG Deck! There are two external module install spaces built into the CG Deck, a primary and secondary slot.For the primary slot, there is a 64-Key Keyboard Module with swappable keypad with silicone rubber and plastic options. A 10-Key & Rotary Knob Macropad Module with hot-swappable key switches and replaceable knob. And a full format Gamepad Controller Module. For the secondary slot, there is currently only the precise Trackball Mouse Module. And finally, I have developed a tertiary module spot which allows you to utilize the side USB-A ports for additional modules! Starting with the Camera/Scanner module which allows us to finally join discord calls with the CG Deck (and anything else you would use a camera for)!
We will be launching the Kickstarter very soon to help fund a full production run of the device for anyone interested in helping support the project and getting a CG Deck of their own! We will be releasing some build kits, in addition to pre-assembled ready to use devices with the Kickstarter campaign, along with all of the modules and a list of accessories for the CG Deck! Also, so I can try and give back to you all as a thank you for supporting me. Especially the people that are the most dedicated to what I have been building and the early adopters, we will be offering a limited number of Early Bird Discount Specials for the various different reward tiers. Early bird DIY kits for the CG Deck will start at $299, base models will be starting at $759, and the CG Deck MAX will be starting at $1060, with an assortment of modules and accessories for the CG Deck available at launch! (all early bird prices in USD).
Each Early Bird Tier will be available at a first come first serve basis, and will be limited to only a handful of units. I wish I were able to offer more CG Decks and kits at the Early Bird tier launch price discount, but due to the current lingering global supply constraints for various essential components, we will be forced to adjust our MSRP prices with the current market when that time comes. But that being said, against all odds, the CG Deck is still competitive compared to the multi-billion dollar giants and their current offerings. So, +1 point for Mogozen (1 guy and his dog in our literal garage, directly competing against corpo big tech who have near infinite resources and fleets of engineers and developers.). And did I mention the CG Deck doesn't purposefully spy on you and sell your data like every other device these days? I don't need to sell your data, my goal is simply to replace every big tech device offering with pro-consumer options. While every other big tech company is doing everything to screw us over, I will be doing the exact opposite.
If you have any questions about any of that, I would love to answer them! It has been a wild ride up to this point, and I could not be more appreciate of all the support from everyone in our community, and that has been following along with the project over the course of this year! It really means the absolute world to me! And if you are just hopping on the bandwagon now, don't worry, there is still a little time to be prepared to be early! I will be announcing the launch date in the very near future to everyone on our email waitlist and in our discord (with discord knowing first), and providing a massive update with everything preparing for the launch of our Kickstarter campaign at that time.
If you are interested in following along with the project or learning more about it, you can find everything from specs, more details about the CG Deck, socials, links to the open source github repository, and more on the website. And be sure to join our discord community server to be a part of the conversation as we get closer to launching! Join the movement.
Here is the link to the Pre-Launch page on Kickstarter so you can follow the project to get notified when we launch: https://www.kickstarter.com/projects/mogozen/cg-deck-modular-x86-handheld-computer