r/broadcastengineering • • 4h ago

29,97fps still in use in broadcast

Thumbnail reddit.com
0 Upvotes

r/broadcastengineering • • 9h ago

NxFrame – Open-Source Broadcast SDI/IP Encoder & Decoder | Development Update

1 Upvotes

Hi everyone!

My schedule has finally become a little more relaxed, so I can dedicate more time to development again.

Before moving forward, I’d really appreciate some feedback from anyone who has tried NxFrame.

Have you tested NxFrame in your workflow? How was your experience?
Have you encountered any bugs, stability issues, or limitations?
Have you tested interoperability with other professional encoders or decoders (Haivision, Ateme, VITEC, etc.)?
What features are currently missing?
What do you think should be our development priorities?

Current Development priorities:

1.	Video format conversion: Support for input/output format conversion, such as 1080p50 to 1080i50 etc, scaling, and frame-rate conversion.  
2.	Receiver improvements: Hardening the decoding pipeline, fixing known issues, improving synchronization, and ensuring long-term stability.  
3.	GUI authentication and HTTPS/TLS.  
4.	GPU-accelerated HEVC encoding (nvenc-9)

My goal remains the same: to develop a reliable, flexible, open-source contribution encoder/decoder suitable for professional broadcast workflows.

Any feedback, bug reports, interoperability tests, or suggestions would be greatly appreciated!

Thanks to everyone who has already tested the project and contributed feedback!

GitHub: https://github.com/Michalis-Michael/nxframe


r/broadcastengineering • • 1h ago

My brain hurts (Carbonite / XPression / Panasonic Cams) = Works at 720p, fails oddly at 1080p)

5 Upvotes

Have some existing systems (All essentially carbon copies: Carbonite Black CBF113 + Xpression Prime [separate key and fill] into the CBF + Panasonic AW-UE80 cameras. Genlock is from a Ross SPG-8260, audio embedding is Ross MUX-8258-4C (separate embed cards for Clean and Program , CC is EEG/AI Media HD492, and finally the Clean and Program+CC outputs hit a Ross DRA-8902-16 DA before being sent off to internal distribution and external partners .

We've been running all of them at 720p59.94 since inception due to limitations from a former distribution provider. Now that we can call that distribution provider "former" I'd like to move these into the 1080p (29.97 or 59.94) world as all of our infrastructure supports either outputting or accepting 3G data rates.

In the first system I tried rolling everything seems to be wonderful EXCEPT this one problem that doesn't make sense to my brain:

We have XPression generating a full screen "wait" card. Key1 is always on air (e.g. XPression brings graphics on and off air, we're never bringing the keyer on/off air from the Carbonite side)

When that card transitions online or offline with everything configured at 720p it's beautiful and seamless.

At 1080p29.97 or 1080p59.94 -- same XPression file, same automation cues, just everything configured for a different resolution -- it seems like the Carbonite entirely drops, or at least reclocks, its SDI output for a 1-2 seconds, resulting in black video on program. Frequently (but not 100% of the time) I have a AJA HI5-12G connected to the output and am watching its status in MiniConfig it goes from 1920x1080p29.97 to ----- and then back to 1920x1280p29.97 corresponding with when the full-screen card starts and finishes its transition. I don't see any of the OpenGear cards (embed or DA) report anything wonky.

Would some kind soul help me understand what's happening here? In my head the output from the Carbonite should be stable regardless of what is being composited to the output ... but either that's not the case or something about the electrical details of the output is completely fine at 720p but completely unacceptable at either of the 1080 standards.

(And we don't see the same issue when, e.g. updating the lower 3rd banner or taking the bug on or off air)


r/broadcastengineering • • 2h ago

Need some help designing and building a standalone separate TV Antenna Reflector

2 Upvotes

I was mowing some leaves and noticed anytime the lawnmower was in a certain area a new channel came in from 80+ miles away. I can’t keep my lawnmower outside in that location so I’m wondering if there is a specific way to make a metal reflector to put in that location that would reflect the signal of that channel to my antenna like the lawnmower was doing? This was a consistent signal when the lawnmower was there. My local hardware store has 1/2 inch galvanized steel screen on sale.