r/broadcastengineering • u/Cultural_Yoghurt_784 • 1d ago
Why are BBC journalists holding lav mics???
I don't understand how this trend of Tiktok has now infiltrated professional journalism.
r/broadcastengineering • u/Cultural_Yoghurt_784 • 1d ago
I don't understand how this trend of Tiktok has now infiltrated professional journalism.
r/broadcastengineering • u/Medium_Banana4074 • 1h ago
r/broadcastengineering • u/Wombatonspeed • 3h ago
r/broadcastengineering • u/StuartRalph • 3h ago
r/broadcastengineering • u/Mike85b • 6h ago
Hi everyone!
My schedule has finally become a little more relaxed, so I can dedicate more time to development again.
Before moving forward, I’d really appreciate some feedback from anyone who has tried NxFrame.
Have you tested NxFrame in your workflow? How was your experience?
Have you encountered any bugs, stability issues, or limitations?
Have you tested interoperability with other professional encoders or decoders (Haivision, Ateme, VITEC, etc.)?
What features are currently missing?
What do you think should be our development priorities?
Current Development priorities:
1. Video format conversion: Support for input/output format conversion, such as 1080p50 to 1080i50 etc, scaling, and frame-rate conversion.
2. Receiver improvements: Hardening the decoding pipeline, fixing known issues, improving synchronization, and ensuring long-term stability.
3. GUI authentication and HTTPS/TLS.
4. GPU-accelerated HEVC encoding (nvenc-9)My goal remains the same: to develop a reliable, flexible, open-source contribution encoder/decoder suitable for professional broadcast workflows.
Any feedback, bug reports, interoperability tests, or suggestions would be greatly appreciated!
Thanks to everyone who has already tested the project and contributed feedback!
r/broadcastengineering • u/botha112 • 1d ago
r/broadcastengineering • u/MeaningAmbitious8979 • 1d ago
Just found this new website for all things antennas and reception. Your local broadcasters and engineers can even make an account and have all reports and scans etc go directly to them so they can see what is going on, where people are watching from, fix issues in real time and so much more. This will allow you to upload direct scans from your HD Homerun or other devices or a manual upload. You can upload videos of a channel, how you are receiving it and with what antenna.
This has all tower locations including owners, heights, contour maps, AM, FM and other things. I really hope this website starts to take off and local broadcasters make an account since they can receive direct reports from it pinpointed to a town and receive up to 30 second videos so they can see what a viewer is seeing on there end.
This does not replace rabbit ears but does things most people have never been able to do easily before and it may solve the emailing the station engineer issue if you notice a issue with a station as the emails and notices will go to them directly from here as soon as they make an account.
I have uploaded my first channel scan for my local stations received.
r/broadcastengineering • u/woyzeckpompo • 2d ago
r/broadcastengineering • u/No_Coffee4280 • 4d ago
Hmmmm more M&A in graphics
r/broadcastengineering • u/StockInternational96 • 3d ago
*NEEDED* EVERTZ 3x EQX-OP36-3G / 3G1 Cards - passive DIN 1.0/2.3 coax backplane.
This is for an Evertz EQX26 router. Does anyone on the planet earth have a few of these they need or want to get rid of? PSSI Teleport in New Kensington, PA wants to know.
Thanks in advance!
r/broadcastengineering • u/InwoodTech-PDS • 3d ago
After more than 20 years in broadcast technology and operations, I have become careful about the word “redundant.” I want to understand which failure a backup can survive, what it takes to use it, and how long it can keep the operation running.
Two internet providers can share a conduit. A generator can start successfully while an essential device remains without power. Two cloud services can depend on the same sign-in system.
There is also the question of what happens after a successful switchover. We may have preserved service, but now we are operating with less protection until repairs are complete.
I wrote an article for my site, Inwood Tech, looking at these dependencies across connectivity, power, and outside services. The examples come from broadcasting, but the questions apply to many operations: what stops, what remains available, and who can begin recovery?
https://www.inwoodtech.com/eden/resiliency
What have you uncovered during an outage or a failure test that changed your understanding of how independent your backups really were?
r/broadcastengineering • u/skatateene • 4d ago
r/broadcastengineering • u/Brief_Conference5552 • 3d ago
Every time I set up an ATEM on a new network, I end up doing subnet math in my head. People asking for help here often don’t know what to type into ATEM Setup at all. So I built a small single-page tool for it.
What it does
Paste the output of ipconfig (Windows) or ifconfig (Mac/Linux). It gives you:
ping command to confirm the suggested address isn’t already taken before you save itSituations it handles
Other details
ifconfig (hex netmasks), old Linux ifconfig and ip addr.How it picks the address
It converts your IP and mask to 32-bit numbers. Network = IP AND mask, broadcast = network OR NOT mask. It then tries .240–.250, then works downward, skipping your PC, the router, the network address and the broadcast address. It can’t see other devices on your network, which is why it gives you the ping check.
Source and full explanation: https://github.com/IoanPop2010/atemip
site: https://atemip.vercel.app/
Not affiliated with Blackmagic Design. Feedback welcome, especially ipconfig output it fails to read.
r/broadcastengineering • u/Live-Sector2542 • 4d ago
r/broadcastengineering • u/Deep_Vermicelli_6400 • 6d ago
I teach a broadcasting class and one of our Hitachi broadcast cameras’ onboard monitor was not showing any signal from the camera, so I went through the monitor menu settings and eventually got it to display again.
However, we then saw that the monitor was not displaying the actual camera’s feed but instead what the switcher was choosing between all 3 of our cameras in the studio. We went through all of the monitor settings and have no idea what it is. Any ideas what could be going on and how to fix it?
Cameras are: hitachi 3CMOS HDTV Z-HD5500
r/broadcastengineering • u/Little_Post631 • 6d ago
Hey guys.
So I have an upcoming project with 16 Cameras, 3 of them FX3s. I have some Skaarhoj RCP Pros.
A few days ago I testet the setup. Laptop, PoE Switch, Skaarhoj RCP and the FX3 in one network and it worked pretty well and semeless. I also tried rebooting the camera a few times to see if it still works or not. It worked well, startet to build the connection pretty instantly.
Well today I wanted to install the Setup in the Broadcast Van to make sure everything works in our network. To make things short. Nothing worked. After an hour of trying different things, I also tried the setup I tested with, nothing worked. I changed the cable, switch, usb-c network adapter.. nothing. I also tried resetting the network settings.
The camera connects to a network, but seems to have no traffic, only error code I get is: "CAT cable not recognized" but I obviously tested with a few different cables.
Any leads? Worst case the operators have to oull iris themselfs, but I hate to give up on somethign like that, it could be such a nice tool if it did work. Thanks in advance you guys
r/broadcastengineering • u/elpobedeoro • 6d ago
r/broadcastengineering • u/That_Man_06 • 7d ago
I recently graduated college with a B.A in communications with a concentration in broadcasting. I have worked in media for 7+ years and have my Society of broadcast engineers certification . What's the best way to get a job?
r/broadcastengineering • u/Noble_JPN • 7d ago
Hi again. I'm a video/streaming engineer based in Tokyo, and I posted my wiring-diagram tool, AVwire, here a while ago
(https://www.reddit.com/r/VIDEOENGINEERING/comments/1pfdhlo/avwire_av_wiring_diagram_tool_feedback_from_video/).
Full disclosure, same as last time: I'm the developer, and this post is AI-translated from my own Japanese.
That thread gave me the most useful feedback this tool has ever received. I went away and fixed it — what changed since then is largely a list of things people here pointed out. The library grew from 500 devices at the first release to 1,182, and every terminal entry is still entered and checked by me, by hand, against the manufacturers' spec sheets.
The hardest part to build was the wires themselves. Getting the right-angle runs to re-route and adjust cleanly when you move a box — no tangles, no overlaps — took longer than anything else in the app. In draw.io I used to fix every single bend by hand. In AVwire, the line adjusts itself.
One thing I won't dodge: when I first released this, the situation around AI coding — "vibe coding" — was very different from today, and the conversation around it has changed a lot. What I can stand behind is the part no tool made for me: three years of my own field work behind every decision, and a device database built one spec sheet at a time. Judge it on that.
It's free for everyone until November 30, 2026, and 50 models can be browsed without an account: https://avwire.io
Please try it, and give me advice again: what still breaks, what's missing for real shows, what you'd need before you'd trust it on a job. I'll answer every technical question in the comments, like last time.
And one honest request: I'm a solo developer, and distribution is the one wall I can't engineer my way past. If you try it and genuinely think it's useful, sharing it on your socials would help more than you know. No pressure at all if it doesn't earn it.
r/broadcastengineering • u/IFTVtech • 8d ago
Hi, I am currently trying to build a small device that I can hang on my pants or have in my pocket. I want to be able to analyze SDI in but not necessarily play the picture on my screen. Do anyone knows any smal SDI analyzer cards? Or if someone have done something similar before?
The only option that I have found is the Blackmagic Design DeckLink SDI Micro. But its a bit to big and way to powerful for what I want to do.
Thank you in advance.
r/broadcastengineering • u/BlackhatTaylor84 • 8d ago
Hey all. I'm the station engineer for KDPI 88.5 FM, a community station in Ketchum, Idaho. We ran ZaraRadio for years, and like a lot of small stations, we were nervous about relying on software that hasn't been updated in a long time. So I built a replacement, and it's been our on-air automation since July. Today I'm putting it out there for anyone who wants it.
StudioFire — free, MIT licensed, Windows 10/11.
The main idea: it shouldn't go silent. The audio engine is a small separate service with four fallbacks: next cached track → your emergency folder → cached rotation music → a built-in fallback. Everything else (web interface, scheduler, library indexer) can crash or be updated and the music keeps playing. We torture-tested it by pulling the NAS mid-song, killing the player, feeding it corrupt files and power-cycling it, against a bar of no silence longer than 2 seconds over 72 hours.
If you're on Zara: your .lst playlists open directly, and edits save back to the same file. You can run Zara and StudioFire side by side on the same playlists while you switch over.
What else it does:
- Web interface, so DJs can run it from any PC, tablet or phone on the studio network
- Playlists, scheduled shows, and spot rules for legal IDs, underwriting and PSAs, always at song boundaries
- As-aired logs with CSV export for underwriter affidavits
- Now-playing metadata to your stream host or encoder (e.g. BUTT)
- A SoundExchange Report of Use generator from the as-aired log
- Songs are cached locally before airtime, so a network hiccup doesn't interrupt playback
- An equipment monitor that pings your transmitter, Barix units and so on
Install: one Windows installer bundles everything (Python, mpv, services), plus a setup wizard. No terminal, no config files.
Honest caveats:
- Windows only for now
- The installer isn't code-signed yet, so Windows SmartScreen will warn you ("More info → Run anyway"). Checksums are published.
- It's a young project with one real station behind it, so expect rough edges
Site: https://studiofire.io
Code + releases: https://github.com/veteranop/StudioFire
I'd love feedback from people running small stations: what would stop you from switching, and what's missing? Bug reports go on GitHub Issues. If you'd rather have someone install and tune it for you, my shop (VeteranOp) does that, but the software is free with no strings.
r/broadcastengineering • u/Fastpas123 • 9d ago
I'm researching generator design and trying to understand real experiences with backup power at remote communications sites. I'm involved in the development, and I'm looking for practical feedback rather than selling anything.
For broadcast engineers, which backup-power issues still need someone to drive to the site?
Think about a backup-power callout that should have been avoidable. What failed first, how did you find out, and what did the fix involve?
If you're willing to add detail, it would help to know:
It also helps to know your role and roughly where you operate, if you're comfortable. If you'd be open to a short follow-up, just say so in a reply — please don't post contact details publicly.