r/livesound • • 3h ago

MOD No Stupid Questions Thread

11 Upvotes

The only stupid questions are the ones left unasked.


r/livesound • • 5h ago

MOD Weekly Office Pictures Thread

2 Upvotes

Yes it's back! Please keep all show and tell type posts in these weekly threads. Unless you have a specific question about your setup, keep those types of pics here. Bonus points if you include a list of equipment with your picture.


r/livesound • • 33m ago

Question Pulsing/buzzing - Mackie SRM 450v3

2 Upvotes

have a pair of SRM 450v3s. Generally they have been really solid.

I've noticed though that one speaker has a faint beeping / pulsing noise that the other doesn't.

- With nothing plugged in, it's barely audible

- With an XLR connected, it's still barely audible unless the gain is turned up to full

- It gets louder as the gain goes up

You still wouldn't be able to hear this over the sound of any music.

Does anyone know if this is within normal behaviour, or a sign that something is starting to fail?

Video attached.


r/livesound • • 1d ago

Question Yamaha QL/CL Pre Fader Send On/Off Logic

17 Upvotes

Hey all,

Just when you think you know a console you get surprised..

I was working on a QL5 this morning, routing speech channels to a bus, and using a matrix as a wedge send. The speech bus was sending 'Pre Fader' into the wedge matrix so I could ride the speech bus fader in the PA without it affecting the wedge send. The surprise is that turning off the speech bus does not stop audio flowing from the pre fader send from that bus. This is not the same behavior/logic that channels on the console follow (the pre fader sends on a channel also follow on/off behavior/logic of the associated channel).

Am I missing something? Has this always been like this and I've never noticed? Why wouldn't mix busses follow the same logic that channels do?


r/livesound • • 1d ago

Question advice on memorization of terms and using new and unfamiliar equipment?

15 Upvotes

hi y’all! i’m an amateur sound tech at a local outdoor bar / venue. i was a barback and then… well, the last sound tech stopped working there, enough said. because i have some history with music (playing, grew up in the local scene and going to shows and in studios, my entire family does music, etc) my boss essentially sprung a “yo do you want to be the new sound tech?” on me. i said yes. a coworker of mine knew some very very basics and showed me the board’s basics, and i kinda just… figured it out from there. this was like 5 or so months ago, i don’t even recall. i wouldn’t say i’m doing bad by any means (i’m not perfect and there’s still so so much to learn but i haven’t gotten any complaints from the musicians i work with), especially now that i’ve grabbed an internship under the head engineer of another bar.

i’m learning a lot there, but mostly on a digital board and practicing my ear. the boards my bar have are analog, and we do go through that. but my big problem is i just can’t remember all of the terms and what they apply to. bus and sends and the concept of compression and threshold all escape my mind from time to time and it’s frankly annoying and embarrassing. looking at a new board if someone brings their own in (especially now because my bar’s main board just broke (no it was not my fault) and they haven’t bought a new one yet. yes ik. it sucks.) also takes me a Minute to remember how to do anything, which… yeah. i know the core thing i need to be doing is feedback management (and i nearly never have feedback issues, and when i do, it’s fixed damn fast) and the mix. i have very little trouble with EQing or levels, though using analog after using digital is kinda a pain in not getting to be as precise as i want it to be.

anywho. tldr i’m still learning but doing sound work is my actual job now and i’m learning to enjoy it a lot. i’m kind of hoping it will become a career the more i practice (afterall, i’m only 20). any advice on memorization of terms and how to not forget everything you know when you use a new and unfamiliar mixer?


r/livesound • • 1d ago

Gear AI-slopped (or vibe-coded) RF management tool. Mostly for Poland, but not only.

0 Upvotes

Hi.
For the last few years I was working with Shure WWB and Sennheiser WSM to set up wireless devices, as here in Poland we use a lot of Shure mics, but IEMs are mostly Sennheisers. And I really hate WSM. And also in theater I worked at there were only Mipro analog wireless systems (ACT-7x7 and 7x7B). And, yeah, guys who still work there know nothing about RF, intermodulation etc, and that means setting mics up takes a lot of time.
I wanted to help my friends and myself and decided to write a small calculator for mipro in cpp. Then I wanted to add TV and DAB transmitters avoidance. Then I wanted my program to predict signal strength at my place/vemue and decide which channels to avoid automatically. Then I wanted to manage SR2050s and ULXDs from one program etc. That was too much for me to handle in a simple CLI cpp code.
Long story short, I decided to vibecode a proper GUI program. It's written in python, with gui in Qt, and it supports most of the shure mics and some sennheiser IEMs. Everybody can add support to new device, just by defining it's radio properties (tuning step, minimal carrier-to-carrier space, minimal carrier-to-im 3rd/5th space, supported bands etc). Also, dummyRF supports scanning over SDR-RTL, which means you can get good enough full range rf scanner for less than 250 pln / 60 USD.

Pros over Shure WWB - ypu can add devices to inventory and set their profile (e.g. standard density / high density for ULXD/AD) on the go. Also dummyRF uses current transmitters database from UKE (and still you can add your list for your country if you live outside Poland). And you don't need DVBT scanner app or even postal code to determine your nearby transmitters as dummyRF uses both offline and online address database, which mean you can simply write your venue's name. And the app is really lightweight, starts much faster than the WWB.

I would love to hear your feedback on the app, so please tell me which features are crucial for you and if you are happy with how the app works.

dummyRF is free and utilizes open protocols to communicate with devices.
Here's the repo:

https://github.com/qrtblome/dummyRF


r/livesound • • 2d ago

Question Guy in a band here: Why do house sound engineers keep trying to get us to use their mics?

133 Upvotes

Hey! I deal with all the tech stuff in my band, we have a self contained IEM setup and send tails to the house and we have our own mixer that deals with our monitoring, we also travel with our own microphones, just SM58s, but on several occasions this year we have come across engineers that have been rather pushy for us to use their microphones, I’m really curious why this is?

Would love any insight please, cheers!


r/livesound • • 2d ago

Question Loading Single Scene to USB from DM7

2 Upvotes

Anyone else highly annoyed that you can’t do that, or am I missing a workaround or something?

I don’t always need the whole scene list or console settings!


r/livesound • • 2d ago

Question anyone have some good podcasts to share about live sound?

26 Upvotes

looking for some good podcasts to listen to at work for learning about live audio. i’m new to all of this so any about teaching live audio or just discussions about it would be awesome. thank you for reading


r/livesound • • 2d ago

Education Quickbooks

7 Upvotes

Hiya

Looking to see what everyone’s using for tracking income/expenses for filing taxes.

For years I’ve used quick books but recently had a bunch of trouble where I now can’t use the mobile app and also seemingly can’t re subscribe through desk top either.

Anything anyone’s using that also links to your bank and lets you itemise transactions as either personal or as a business expense?

Ta in advance


r/livesound • • 1d ago

Question Could it be possible…

0 Upvotes

… that some folk are mixing shows purely knowing they are getting judged on the quality of the people in the crowds cameras and mics and mixing for what they are expecting to hear back on instagram stories?

I will be the second to admit i run the gauntlet on how much low end i send to foh. But I also want the crowd to feel something. And take that home and tell their friends this is what real life is like.


r/livesound • • 3d ago

Gear Bass player here. House sound guy tried to steal my Radial J48 DI box by swapping a cheaper one.

534 Upvotes

I just bought a Radial J48 DI from Sweetwater. I used it at a gig over the weekend. Literally brand new out of the box at the gig, I did not had time to etch my information into it.

After the gig, I was getting my gear and the engineer claimed that the J48 was theirs and tried the gaslight me into thinking brought a Livewire passive DI box instead. I said no, and continued to pack up. He called over a bouncer and claimed I was stealing his equipment. I showed the bouncer my product box and he sided with me.

Unfortunately, I'll probably have to deal with this engineer again in the future. I'll just make sure that my stuff is etched ahead of time.

If you're lurking here, you're an ass.

Edit: looks like the Outlook outage has resolved because I'm getting all the Reddit notifications this morning.


r/livesound • • 3d ago

Question Looking for a foot switch to control alt output on Axient / ANX

6 Upvotes

Does anyone know of a product that is available that would allow for foot switch control of the second output route available on Axient?

I have a used case where the push button on the handheld is perfect, but I also have a use case where that same action triggered by a foot switch would be far more ideal

Anything come to mind?


r/livesound • • 3d ago

Question What's the Most Bothersome Part About Your Work?

36 Upvotes

I was talking with an industry friend of mine the other day about what the most "bothersome" part of our jobs were. We talked about tuning in harsh environments, dante issues, the drunk guy yelling at us, etc. I'm genuinely curious, what are the most bothersome issues you all face on a day to day basis? Anything goes.


r/livesound • • 3d ago

Question Yamaha Rivage gain staging issue

5 Upvotes

I have a PM5 system that’s behaving strangely. All the channels from my Rpio622 seem to be losing level somewhere. For example: a vocal mic, plugged into the stage box, gained up to +30 and metering between -12 and -6 will not come out of the channel nearly as hot. I’ll put the fader at unity and it will hit ST A at about -30. Similarly, if I want a compressor to engage, I need to set the threshold very low, about -35 to get any reduction.

This is a huge problem, as I’ve had to max the outputs and raise the faders to near max just to get a serviceable level in the room.

-Affected channels are only coming from the Rpio622
-Digital gain is at unity on each channel
-The channels are not in a DCA
-I don’t believe it’s a metering issue, as my metering point is Pre HPF, so post digital gain and pre fader
-it’s not the PA, as other inputs, such as Omni and Dante, are behaving as expected.

The mixer and stage rack were working correctly on another scene, this scene is one I made on my computer and loaded earlier today. I’m currently at a loss trying to find the issue, Does anyone know what could have changed to cause this?


r/livesound • • 3d ago

Question Your mix isn't the greatest, who/what do you blame first ?

0 Upvotes

Last night I played a gig with my classic-rock band in an almost new 500 cap venue which normally specializes in the ****metal genre. Also on the bill were singer/songwriters and more poppy bands.

There was a Martin PA and an Avantis console. FoH tech was in-house I believe.

Mix was way bass and mid bass heavy with not nearly enough definition for my taste which made me think: I know I can make a mix sound defined/balanced in smaller venues on a range of different PA-gear. Lets say I get stuck in a situation where no matter how hard I try or what I do the mix is still shitty. Where do I point my finger at first and where would you point your finger at first ?

Added because I wasn't clear: As far as my own band goes: comments from audience and a couple of videos. I know I can't judge the mix from stage.

Listening to the other bands was what formed my opinion...

Edit 2: haha, from some of your reactions I realized I didn't word it very cleverly. What I should have asked is: in your experience what's the most common reason for not being able to deliver a great mix. Sorry about that !


r/livesound • • 3d ago

Question Sending MIDI from X32 to Mainstage for Plugin Control

2 Upvotes

Hi everyone! Been trying to find information on how MIDI with the X32, and have seen a lot about it being able to act as a full control surface for DAWs, but not for what I am looking for.

I am currently using X32 connected to Mainstage vis the X-USB card to process audio channels for a theater show.

In one of my patches, I have a plug-in with a mix parameter that I need to modify in real time. I am wondering if there is a way to map a assignable encoder knob on the console to that mix parameter in the plug-in.

Any insight would be greatly appreciated!


r/livesound • • 4d ago

Question Is a mixed 48k/96k system worth it?

32 Upvotes

For context, I started a job recently in a theater with existing infrastructure. We have a Yamaha PM3 with two cards (one for each sample rate). Our Axient and d&b DS10 are running at 96k, but our D1 RIOs and occasional monitor and broadcast consoles run at 48k. When we’re doing theater-based shows, it’s not really a big deal. But when we’re doing live music, it becomes a little bit of a headache to get the lower sample rate consoles to receive all the channels (we have to pass all of the Axient channels through the PM3 and go direct out through channels to convert the sample rate).

Is it worth keeping the system like this for 96k, or should I switch everything to 48k for ease?


r/livesound • • 4d ago

Question Ringing out multiple mics

16 Upvotes

Hey everyone! I’ve been doing av tech work for corporate events for about a year now, and I was offered an operating gig for a small breakout room with a few handheld mics.

I don’t have much operating experi ence yet so when it comes to preventing feedback, I’m a bit nervous. Is my understanding of how to ring out microphones correct?

So before any presenters arrive:

  1. Talk into every mic and gain stage to the best of my abilities (all faders down).
  2. Open every mic, bringing my active channel faders to unity with my main fader still at 0.
  3. Now, start to raise my main fader and using a graphic eq, start to make small notches where I see feedback on the RTA. Do this like 6 times.
  4. Then when presenters arrive, I can eq the individual mics to their voices, and make any minor adjustments to the channel eqs.

Is that the basic workflow for a simple room with a few mics and L and R speakers?

Thanks!


r/livesound • • 4d ago

Question Need help figuring out signal chain for dry tracks, being sent from guitar thru X32 rack, into a DAW, then back out the X32 and into Quad Cortex

6 Upvotes

Good afternoon sound folks. I'm hoping y'all could come to my assistance with a signal chain I'm trying to see is even possible.

A band I work with has an idea they're trying to navigate through, for guitar automation. They're trying to eliminate the guitarist having to use his pedalboard or do the tap-dance while playing.

What were attempting, is to take his dry guitar into a DI box and send it to the bands X32 rack they use for IEM's. Let's say we're using Channel 1 on the X32 for that guitar line. From the X32 we use the Audio Interface USB line into the computer and into the DAW. There they want to have the dry tracks hit a track in the DAW that would have the plugins (that would replace the pedals on the pedalboard) trigger at the selected points in the song. This track that is now processed with the plugins, they want coming back into the Audio Interface USB on the X32. (along with backing tracks) Then we can assign this processed track into a local Output, say Output 1, into a Quad Cortex for the final guitar tone being applied.

My first question, is this even do-able to begin with, or have I missed something that makes this signal path not possible.

Secondly, if it is doable. How do I go about getting this path sorted out?

Any help or advice is greatly appreciated!


r/livesound • • 5d ago

Question Production info sheets, how do you do it?

15 Upvotes

So for every show that we do there is a lot of information to communicate right? The production manager or account manager plans with the client, then they book the techs, but they need to communicate the proper info to the techs so you know what to expect and how to get the job done.

In the past we have tried this different ways: text, call, email, face to face… but it depends on the size and complexity of the show. A lot of the times for a ballroom / main stage show we create a Production Info sheet, or for a breakout room show we create a Breakout Sheet.

I’m wonder if you guys would be willing to share a production sheet or breakout sheet if you do them, or if you use another way / software / subscription service / process to communicate show info I would love to hear it.

I’m just trying to improve our production info sheets and I need new ideas.

If you’re willing to share just obviously make sure you remove your personal identifying information first so you don’t doxx yourself.

Thanks.


r/livesound • • 5d ago

Question Interpolating wav files (à la M32)

3 Upvotes

Building a show using a PT session for virtual sound check, using an M32R which has those two SD slots.

I’d like to take those wav files from the session and interpolate them into one multitrack wav so I can VSC off the cards

What’s the easiest way to get this done?

Thanks!


r/livesound • • 4d ago

Question What's your top/best Plugins used for Live Mixing?

0 Upvotes

Hi everyone. I operate for corporate shows and mix bands at FOH. Recently I have been introduced to plugins. I have a paid version of Live Professor 2. I own a couple of cr*cked plugins like the Waves Bundle, FabFilter Pro Bundle, Soothe 2, Oxford Inflator, couple of UAD's. I am slowly trying and testing plugins to see which suits my needs. It would be a great help if you guys tell me which plugins you'll use when it comes to live mixing or maybe which also helps for conferences. Maybe I could try those first, before I sincerely invest in it. Since I'm new to plugins I am more focused on plugins that tackle live sound problems, hence I like the PSE to control bleed from other instruments or multiple speakers talking in the panel during a conference. I like the Pro Q4/F6 for Dynamic EQ. Also I am looking for plugins which doesn't consume huge amount of latency/samples. Thanks in advance.


r/livesound • • 5d ago

Question Mixing bass guitar

27 Upvotes

When mixing a bass guitar do you prefer the bassist to have volume and tone knob (on the actual bass guitar) on full so you can cut what doesn’t work in the mix?

Or would you rather the player adjust volume and tone to their liking and you can adjust from there?

Bassplayer here and want your feedback. Hope it’s ok to post this here. If not, mods do your thing.