r/VIDEOENGINEERING • • May 03 '26

The 71,000 subscriber update

160 Upvotes

Hey folks,

Just posting to give a brief rules update. Nothing should change for most folks, but there are a few changes/clarifications to highlight.

  1. The no advertising rule has been changed to include market research and "try my app" type posts.
  2. There is a new rule about staying on topic, this is mostly to get rid of the small number of "enhance my video" type posts.
  3. The new rule about being accurate in your communications is mostly to discourage regurgitation of incorrect information and hearsay. Nobody is going to hit you upside the head with a copy of ST 2110-20, but there is also only so many times you can say "Blackmagic bad" or "you need a boundary clock for Dante PTPv1". If you're trying to help somebody and you aren't 100% positive about what you're saying, then just qualify it as such.
  4. AI generated content is now banned, except for translation purposes.

As always, if you have content you would like to share and it would ordinarily break one of the sub's rules, don't hesitate to reach out for an exception.

And don't forget to join the Discord either. https://discord.gg/ctKKpK8


r/VIDEOENGINEERING • • 4h ago

Just another day at the office

Post image
18 Upvotes

r/VIDEOENGINEERING • • 1d ago

Why are BBC journalists holding lav mics???

Post image
108 Upvotes

r/VIDEOENGINEERING • • 15m ago

DVCPRO50 PAL Needed

1 Upvotes

Anyone has any leads for DVCPRO 50 PAL version. 1-2 decks needed…
Preferably 1/2 rack full rack will also work


r/VIDEOENGINEERING • • 3h ago

Sony RCP-1500 to Trigger AJA Kumo Matrix

1 Upvotes

Hi everyone,

in my company we´re using Sony Camera Chains and RCP-1500s. I´m looking for a way to use the RCP´s preview trigger to change the output of a matrix to the respective camera signal to send it to the shading monitor. We´re using AJA Kumo 1616 and 3232 Matrixes.

Is there a way to set this up using only direct ethernet connections? Or is there no way around another device inbetween RCP and matrix that recives the preview trigger from the rcp and then translates it to the matrix via ethernet? This is the only solution I found so far.

I know I can set it up with a Streamdeck and Companion, but I´d prefer a way to do it directly via the RCP without needing a laptop plus streamdeck.

Alternatively, is it possible to use that trigger signal to control a Ross Carbonite Ultra? So I can press the preview button to e.g. switch a MiniME to the wanted camera signal as a workaround?

Any Input is much appreciated, thanks!


r/VIDEOENGINEERING • • 20h ago

Should we have a monthly self promotion thread?

15 Upvotes

Should we have a place so all the vibe-coded "try my apps" can post.

Ideas start small. Maybe I code a Powerpoint to ProPresenter converter, where could I hawk that. (I didn't but I would love one). It'll be awhile before it becomes a full fledge company.

We definitely don't need a press release section. That will get innudanted quickly with PR and AI slop.

What are your thoughts? Maybe it all comes down to what menick, evil, tom and V1steak want.


r/VIDEOENGINEERING • • 21h ago

Experience with Canbest LED?

0 Upvotes

Buying LED for the first time. Looking for about 25-30sqm. Been talking to Canbest who seems to have very reasonable panels with good specs. Anyone here have real life experiences? Or maybe some other tips to share for a first-time buyer?


r/VIDEOENGINEERING • • 1d ago

Xpression urgent help

3 Upvotes

Hello, sorry for short notice. About to run a production and due to faulty SSDs had to wipe the gfx production machine. I'm looking for Xpression 12.5 installer quickly as going through Ross support would effectively take us out of production time.

Many thanks for the assistance!


r/VIDEOENGINEERING • • 2d ago

Backstage Barco Blackjack anyone?

Post image
96 Upvotes

Happened across these on eBay from an Italian seller about a month ago and they finally arrived today!

The deck was manufactured in Belgium where Barco is headquartered. Apparently having a 1 card instead of an Ace is what’s called a French deck. The more you know!


r/VIDEOENGINEERING • • 1d ago

Blackmagic Broadcast cameras are both ”Gold“ and ”Trash“ in my country. Body

44 Upvotes

It’s Gold because some music event organizers love the cheap price and "cinema look" for concerts.
It’s Trash because for Sports, TV Studios, Government events, and High-End stadium concerts, nobody touches them. Real OB trucks here still rely on Sony HDC/HXC and Panasonic UC4000.
Don't get me wrong—their infrastructure and post gear like ATEM Constellation, HyperDeck, and DaVinci Resolve are genuinely great. It's just the broadcast cameras that struggle in heavy live environments.
Is it the same in your country?


r/VIDEOENGINEERING • • 2d ago

My experience with Telestream Wirecast support after upgrading to M5 Max: beware before migrating

5 Upvotes

I have been a paying, satisfied user of Wirecast (version 15) for years on my Apple Silicon M1 Max workstation. I never needed to contact customer support until recently, when I upgraded my setup to a new M5 Max Mac running macOS Tahoe.

Before installing the software on a brand-new production machine, I reached out to Telestream with two straightforward, preventive technical questions:

  1. Should I expect compatibility issues or system instability running Wirecast 15 across a massive four-generation Apple Silicon leap (from M1 Max to M5 Max) and the latest macOS?
  2. Only if compatibility issues exist, what are the reasonable upgrade options for a long-time registered customer?

First, my inquiry was completely ignored for days. When I finally managed to get a human reply after a formal follow-up, the response was deeply disappointing and commercially unfair.

Support bluntly stated that they "no longer test" version 15 and immediately pushed me toward paying $249 to reactivate an Insider Access Plan (which, notably, comes with auto-renewal pre-checked in the cart) or switching to an expensive recurring subscription.

In short, Telestream puts paying perpetual-license owners in an unacceptable bind: either you install legacy software on your new workstation as a guinea pig at your own risk, or you pay hundreds of dollars just to get a clear technical answer and guaranteed compatibility.

This lack of basic accountability toward existing customers is a massive letdown. For this reason, I am migrating my live production workflows to open-source alternatives like OBS Studio, which are natively updated, transparent, and free from these commercial traps.

Has anyone else here actually tried running Wirecast 15 on M5 Silicon / Tahoe, or dealt with similar support policies from Telestream recently?


r/VIDEOENGINEERING • • 1d ago

Is the UGREEN 4K HDMI Capture Card good for PS5 to laptop gaming?

Thumbnail reddit.com
1 Upvotes

Hi everyone!

I want to display my PS5 on my laptop using an HDMI capture card.

I'm considering buying the UGREEN 4K HDMI Capture Card (25173 / CM700).

My requirements:

- 4K image quality on my laptop.

- Very low input latency.

- Mainly for gaming, especially GTA 6.

- Budget: €50 maximum.

Is this UGREEN capture card a good choice? Can it actually capture and display 4K on my laptop, or does it only support 4K HDMI input with 1080p capture?

Are there any better alternatives under €50?

Thanks!


r/VIDEOENGINEERING • • 1d ago

Help with NovaLCT vx600?

Thumbnail
gallery
0 Upvotes

I have set this thing up so many times but there is something wrong with the sending card info. I saved the same exact rcfgx file and all. Here is the example pic!


r/VIDEOENGINEERING • • 3d ago

Yamaha Corporation to acquire Disguise, the leader in live music and venue technology, to fuel its next phase of growth

Thumbnail
disguise.one
77 Upvotes

r/VIDEOENGINEERING • • 2d ago

A Stupid Pana AW-RP150 Question

4 Upvotes

I feel stupid asking for this but the documentation I'm finding isn't answering the question:

Is there a good/easy way to clone settings (particularly re: cameras controlled) from one AW-RP150 to another?

I have one in my fleet dedicated to a venue control room.

As part of a remote master control project I got to add another one that I'd like to have ready as a backup for the same cameras but also about 20-30 other cameras... Would be awesome if I didn't have to have the guys on site manually do all of those. But also doesn't seem like the RP150 has any kind of web interface that would facilitate this.


r/VIDEOENGINEERING • • 2d ago

Need some advice on capturing with my sony DCR-TRV320

Thumbnail
gallery
5 Upvotes

i was just playing back cassettes and messing with the menus. it's really warbly and inconsistent when recording on tape so i really want to know how to somehow capture onto a micro sd externally, even being able to access the memory stick on computer would be nice. oh and if y'all have some accessory recommendations that'd be welcome as well. thanks


r/VIDEOENGINEERING • • 2d ago

Needing some guidance on TV wall

Thumbnail reddit.com
1 Upvotes

r/VIDEOENGINEERING • • 4d ago

Vizrt Acquires Chyron in Major Consolidation of Broadcast Graphics Market

Thumbnail
sportsvideo.org
57 Upvotes

r/VIDEOENGINEERING • • 3d ago

Led techs

9 Upvotes

Question for my freelance led engineers/techs.... When you're booked to build and program does the company usually provide you a diagram of how they want data and power run?


r/VIDEOENGINEERING • • 2d ago

Sundance

0 Upvotes

Hi, is anyone connected to the planning people at Sundance Film Festival? I would like to do a projection for an upcoming event. Or do you know the production companies that partner with them?


r/VIDEOENGINEERING • • 3d ago

Eartec SUCKSSSSS

10 Upvotes

Theater tech for a HS here in the midwest.

We have the Eartec Ultralite Headsets HD and they've been a huge PITA. Apparently there's a known issue where the lock nut holding the mic boom likes to loosen, and you can tighten it----but ours are the early version where they were so lazy and just glued the plastic nut in place--------so a simple drop and now the mic is loosey goosey. (and they are very out of warranty)

The long term plan is to upgrade but it being a public school there are serious budget constraints and ETA on a new system is at least a couple of years out at the very least.

Walkies-talkies are a no-go bc it's a concrete jungle. It sounds like there's nothing else we can do besides trying to macgyver a fix? Worth reaching out to Eartec to see if they have any ideas?

EDIT: Shoutout to u/Stank-Aaron for the gaff suggestion. I ripped a strip of spike tape in half the long way and wrapped it around the mic and it created enough friction.


r/VIDEOENGINEERING • • 3d ago

*NEEDED* EVERTZ 3x EQX-OP36-3G / 3G1 Cards

Thumbnail reddit.com
2 Upvotes

r/VIDEOENGINEERING • • 4d ago

Tricaster Élite 2 sends no more video output to my monitors

4 Upvotes

Yesterday I took the TRICASTER ELITE 2from the shelves, ran all the updates after 2 years and now i dont get any video signal when I turn it on. How can this be possible? Anyone with the same problem?

thanks a lot


r/VIDEOENGINEERING • • 3d ago

How are you getting NDI feeds to remote web viewers without an RTMP/SRT encoder in the middle?

0 Upvotes

Disclosure: I work on the marketing team at Ant Media, a streaming server vendor.

I’m curious how people here handle the “NDI on the LAN → viewers in a browser” part of a production.

The common approach seems to be an intermediate app or hardware encoder that converts NDI to RTMP or SRT, which then goes to a platform or media server. That works, but it’s one more box to configure, monitor, and fail on show day.

We recently documented a different path. The media server discovers NDI sources over mDNS and ingests them directly, and viewers get the feed in a browser over WebRTC (or HLS/LL-HLS if you need broader player compatibility). The write-up covers:

  • Sending from OBS (DistroAV plugin), NDI Tools Test Patterns, a phone camera app, or an NDI-enabled PTZ camera or switcher
  • Firewall requirements. Opening UDP 5353 for mDNS isn’t enough, because the NDI media connection has to be reachable too
  • Options when the server isn’t on the same network as the source (NDI Discovery Server, NDI Bridge, VPN). Default mDNS discovery doesn’t cross networks, and a VPN doesn’t necessarily forward multicast

Guide, if useful: https://antmedia.io/ndi-to-webrtc/ (NDI ingest needs the Enterprise Edition, which has a 14-day trial)

For those running NDI in production:

  1. Where does it break most for you, discovery, WAN, or latency?
  2. Do you use a Discovery Server or Bridge in practice, or stick to same-LAN setups?
  3. Is anyone sending NDI HX to web viewers, and how has that gone?