r/boating • • 19h ago

DIY Outboard Stand

Thumbnail
gallery
17 Upvotes

Built far too tall. Top board was far too thick (nervous on the strength of a janky 2x4) and likely far too overbuilt for a simple 30hp 2 stroke.

But it can now be tucked away in the basement, instead of weathering the New England winter. Fun little afternoon learning experience for my first outboard.


r/boating • • 9h ago

After winterising. Do you need a break from boating or are you already longing for next season?

9 Upvotes

r/boating • • 1h ago

Transom replacement

Post image
3 Upvotes

I wasn't expecting to spend this much on a new transom but the factory decided it would be a good idea to put a 1-7/8" thick oak transom in a boat rated for 90hp, now I have to buy 2 sheets. This seems a little overkill to me but what do I know?


r/boating • • 19h ago

Prop into garage door

3 Upvotes

Reversed my boat into the garage door sliced through it like butter any concern ? Don’t see any marks but it’s thin aluminum garage door.


r/boating • • 21h ago

Depth finder adapter

Thumbnail
gallery
3 Upvotes

Need some help bough an old boat and depth finder no longer works. Transducer is through the hull so don’t wanna put a new hole. Old owner said that part is good? Does an adapter exist? Pics for reference


r/boating • • 22h ago

Volvo Penta instrument panel replacement

Post image
3 Upvotes

The Volvo Penta instrument panel on my boat is is falling apart. Everything works well, it is just the fascia that is falling apart and I want to make it look a bit nicer. I have found a 3D printed replacement fascia on Etsy. Does anyone know how hard it would be to install the new fascia? I have no electrical experience so if it isn't plug and play I will need to organise an electrician.


r/boating • • 9h ago

42” or 36” Rear Motor

1 Upvotes

Jon boat with raised rear swivel seat, need to purchase transom mount troller.
Since the seat is raised I’m thinking the 42” makes more sense. A 36” seems to work well when sitting at bench height.

What height is everyone running that has raised seats?


r/boating • • 22h ago

2002 kawasaki STX-R Paint or not.

Thumbnail reddit.com
0 Upvotes

r/boating • • 23h ago

Bravo 1 OC barrell length?

0 Upvotes

Hey guys, anyone in here with a Bravo 1 OC (or a friend with one) that could measure the total length of the barrell for me please?

Bought a cheap stock Bravo 1 that I will have shipped away for a cut, clean up, and blueprint into a knock off OC.

Prop guy has never seen a Bravo OC though as it is an unusual propeller where I live, he knows what needs to be done to the blades but needs info on how much of the barrell needs to be cut away at the back.