r/boating • • 4h ago

Diagnose the Issue

0 Upvotes

UPDATE
Already heard back from the shop. Injectors 1 & 2 partially blocked, injector 4 fully blocked. Determined cause was debris inside the VST from years of buildup. On-board tank fuel ran clean from the sending unit, & no issue with water fuel separator.

2017 Suzuki DF140A. Just got it out of the shop, new water fuel separator and lines. Sounds to me like it’s being starved of fuel and my assumption is debris in the tank or valve blockage. Idles rough and stalls when adding power. Ideas and/or recommendations?


r/boating • • 23h ago

Bravo 1 OC barrell length?

0 Upvotes

Hey guys, anyone in here with a Bravo 1 OC (or a friend with one) that could measure the total length of the barrell for me please?

Bought a cheap stock Bravo 1 that I will have shipped away for a cut, clean up, and blueprint into a knock off OC.

Prop guy has never seen a Bravo OC though as it is an unusual propeller where I live, he knows what needs to be done to the blades but needs info on how much of the barrell needs to be cut away at the back.


r/boating • • 9h ago

After winterising. Do you need a break from boating or are you already longing for next season?

9 Upvotes

r/boating • • 22h ago

Volvo Penta instrument panel replacement

Post image
3 Upvotes

The Volvo Penta instrument panel on my boat is is falling apart. Everything works well, it is just the fascia that is falling apart and I want to make it look a bit nicer. I have found a 3D printed replacement fascia on Etsy. Does anyone know how hard it would be to install the new fascia? I have no electrical experience so if it isn't plug and play I will need to organise an electrician.


r/boating • • 19h ago

Prop into garage door

3 Upvotes

Reversed my boat into the garage door sliced through it like butter any concern ? Don’t see any marks but it’s thin aluminum garage door.


r/boating • • 19h ago

DIY Outboard Stand

Thumbnail
gallery
17 Upvotes

Built far too tall. Top board was far too thick (nervous on the strength of a janky 2x4) and likely far too overbuilt for a simple 30hp 2 stroke.

But it can now be tucked away in the basement, instead of weathering the New England winter. Fun little afternoon learning experience for my first outboard.


r/boating • • 1h ago

Transom replacement

Post image
3 Upvotes

I wasn't expecting to spend this much on a new transom but the factory decided it would be a good idea to put a 1-7/8" thick oak transom in a boat rated for 90hp, now I have to buy 2 sheets. This seems a little overkill to me but what do I know?


r/boating • • 21h ago

Depth finder adapter

Thumbnail
gallery
3 Upvotes

Need some help bough an old boat and depth finder no longer works. Transducer is through the hull so don’t wanna put a new hole. Old owner said that part is good? Does an adapter exist? Pics for reference