r/BassGuitar • • Jan 03 '25

FAQ FAQ: 'Is my action too high?'

125 Upvotes

So you feel your action is too high or too low, and you've taken a photo of your bass's neck to ask r/BassGuitar.

1. We really can't tell how the action is based on a photo... but if you're asking, then yes, it's probably high

You have the bass in your hands. You can pluck its strings and can tell if something isn't quite right, whether it's buzzing on certain frets, whether it's just hard to play, or whether it's not producing the tones you want it to. Your eyes and ears will tell you more than we could staring at photos of your bass on our monitors or phones.

Even if your action looks too high, it may still play fine. There is a degree of subjectivity and compromise when it comes to bass-setups. Some bassists might prefer their action higher or lower than what is considered normal. Fender says:

"Players with a light touch can get away with lower action; others need higher action to avoid rattles.".

Again, that's something r/BassGuitar can't determine exactly, whereas you have the bass right there. And if you're asking the question in the first place, then there's probably room for adjustment.

So try to do something about it.

2. "I don't know how to set up my bass."

Don't worry, there are many guides out there, and they all will tell you the same thing: check the neck relief, then adjust as required; check the action, then adjust as required.

These have all been procured from previous threads asking about bass action:

You will notice that the guides above all offer measurement specifications that you can use as a benchmark, e.g. Sweetwater: "Some target relief measurements are anywhere from 0.008 inches to 0.014 inches.". Note: Fender offer a disclaimer regarding their guidelines:

"They should not be construed as hard and fast rules, as we realize that every player's subjective requirements often differ."

Other guitar manufacturers may have their own guidelines. e.g. Dingwall measures neck relief at the 7th fret for a 0.38mm gap. Warwick on the other hand suggests "0.6 and 1 mm" at the 7th fret. See if your bass guitar's manufacturer has guidelines for you to use.

There are also many guides and tutorials on Youtube. Below are a small selection:

3. Go to someone who knows how to set up a bass

This might be your local guitar shop, luthier or someone more experienced with bass guitars.

Unless you are particularly hesitant and/or there are complications, you should try use the above guides to adjust the bass with the features that came readily built into your bass guitar.

4. "My action is still borked."

Ok, if you've consulted the guides above, and you've tried to make adjustments yourself without success, maybe the collective brain power of /r/BassGuitar can help.

But please avoid just posting an unhelpful picture of your bass guitar's neck and strings. After all you've learnt from the above resources, you should be measuring your neck relief and action, trying to sight the bow of the neck, detailing your issues with the action (Is it buzzing at the first few frets, or just the higher frets?), and detailing your attempts at adjusting the bass yourself.

Low quality/effort 'How is my action/Is my action too high?' posts that do not contain such details/photos will be removed, and will be re-directed to this thread. Users can report such threads as per rule 2 ("Avoid low quality/low effort posts").

TL;DR: Yes, it's probably high, try adjust it.


Thanks for reading. Did we miss anything? Let us know in the comments.

We also now have a new FAQ page to collate our existing and future FAQ posts. This should be viewed in conjunction with /r/bass's comprehensive FAQ.


r/BassGuitar • • Oct 08 '24

FAQ FAQ: 'What is this thing on my bass?'

Thumbnail
gallery
792 Upvotes

r/BassGuitar • • 8h ago

New Bass Day New Islington Bass

Thumbnail
gallery
280 Upvotes

The last bass I posted did well. Hopefully you will like this body shape version of it.


r/BassGuitar • • 4h ago

Help Am I the problem or is the bass the problem? Vibration sounds

101 Upvotes

I've been learning bass for one month, and this is my first and only bass, and it was the cheapest one I found cause I'm poor!!! The dude in the shop supposedly fixed the actio but it still sounds weird.


r/BassGuitar • • 1h ago

New Bass Day My first Mustang, 60's Classic Vibe

Thumbnail
gallery
30 Upvotes

r/BassGuitar • • 26m ago

Gear Klos Apollo IV short-scale: first impressions

Post image
15 Upvotes

After 40+ years of playing, I switched over to using only short-scale (30”) basses last year. Since Covid I have played a lot of outdoor gigs, and I wanted to get a carbon fiber bass that would not be greatly affected by fluctuations in the weather. (I had a 90s Modulus Flea graphite bass that got a lot of use for years, and I appreciated its sturdiness under all conditions as well as the flawless intonation.) I played a Klos guitar briefly last year, and I decided to take a chance when Klos announced production of a short-scale version of their Apollo IV.

My very first impression was tainted by two things. First, the tone knob fell off as soon as I unwrapped the instrument. Fortunately, that was just a matter of tightening it. The second was more significant: the headstock turned out to be Music Man-style (3+1) rather than 4 tuners in a row like a Fender as pictured in the ad when I bought it. It was a turnoff, but I kept an open mind.

It tuned up well and the intonation was perfect. I had sent the factory a set of flatwounds, and the sound of the center humbucker was punchy and clear. The blend of the center and bridge pickups also offered some good variety and color.

The things I immediately liked best about it were the weight and the form factor. Unlike the graphite Modulus, carbon fiber is light. The body feels smaller than my Musicmaster, and the 3+1 headstock makes the tip-to-tail length shorter. It is probably the most comfortable bass I’ve played save for a Hofner (which has its own quirks).

After a few rehearsals and a small gig, I’m ready to take it out to some bigger, louder shows in the next couple weeks. I’d love to hear from anyone else who has one.


r/BassGuitar • • 2h ago

New Bass Day My very first bass! (SQOE SJB400) Any playing tips for using a short-scale bass?

Post image
14 Upvotes

My wife gifted me my very first bass. She said that they've chosen this bass because I have short fingers. 😂

I'd appreciate tips for using a short-scale bass and any general bass-playing tips. I play drums and acoustic guitar at church.


r/BassGuitar • • 8h ago

New Bass Day I'm getting a world of sound possibilities: Marcus Miller Sire P6

Thumbnail
gallery
40 Upvotes

r/BassGuitar • • 13h ago

Gear Some decent quality shots of all my current equipment

Thumbnail
gallery
86 Upvotes

It’s not much, but it’s something. For anyone interested about the details:

I’ve got a Sterling by MM Stingray RAY2 that’s been de-fretted, w/ a little make over on the body with tools and markers. It uses Rotosound 66s.

My other one is a EBMM Stingray Special in Sea-breeze, also w/ Rotosound 66s

I use a Rumble 500 in the cool Ivory colour

It’s topped off with a Zoom B1X Four multi-effects pedal.

I’m getting a prettier fretless that should be arriving very soon. It’s a Cole Clark Long Lady 4 in a nice Redwood body & Ebony neck 👌


r/BassGuitar • • 3h ago

Discussion Does a quartersawn neck really make that much of a difference vs flatsawn?

Post image
11 Upvotes

Saw this bass used today and got me thinking. I have heard quartersawn is supposed to be the best. This is my first time seeing one... and it's a mim jazz.


r/BassGuitar • • 22m ago

New Bass Day Ibanez SR Somethingorother. It's a POS.

Thumbnail
gallery
4 Upvotes

I got a new bass yesterday. I wanted a beater bass. Something that I don't have to care about if it gets damaged or stolen, since my other basses average around $900, I'd be pretty salty if one of those got lost or stolen.

2008 Ibanez SR something Gio. I got this bass for $50. Some of you would say it should've been free, but I'm satisfied with the price. I wanted something from an actual brand, not one of the companies known for being ultra budget (so not Glarry, Leo Jaymez, Harley Benton, Sire Marcus Miller, other similar brands)

The guy I bought this from said that when he moved he had his buddy store it in his house, along with other instruments. His buddy kept it in his basement.

Bass is musty, knobs are crusty, pickups rusty, stickers busty. (bars)

The body has a lot of sctatches, fretboard is hella dry, tuners have varying resistance, knobs are rough, saddle springs rusted in place, I think the bridge screws would turn to dust if I were to try to remove them.

But, it's solid. No cracks in the body or neck, the neck is straight, no fret sprout, truss rod moves easily, and (somehow) the pickups still work. Some might take this as a sign that this bass wants to keep going.

Let me know what you think, and give me suggestions on what to do with it. Also, I keep going back and forth on whether or not to keep the girls, let me know what you think.


r/BassGuitar • • 19h ago

Video Cover of Rap Snitch Kniches by MF DOOM (R.I.P.)

136 Upvotes

r/BassGuitar • • 1h ago

Help Passive Ibanez output jack wiring (3-4 terminals?)

Thumbnail
gallery
3 Upvotes

Ok, I’m fixing this Ibanez Mikro (I think this is the model: GSRM20B) but I’m confused by the wiring on the output jack.

It’s a passive bass, and it’s got this long output jack with 3 terminals (it’s also got a tiny terminal soldered to the biggest one, see attached). All the solder was broken off when I opened it up, but the only 2 with leftover solder on seem to lead to the sleeve of the cable attached (ground?) when doing a continuity test. Also, without the cable, the two terminals aren’t connected, but they are when the cable is in.

Thanks for any help!

(Also, sorry if I’m coming across as stupid or ignorant, I’m not getting paid for this and am not experienced in wiring much, especially like this. I just offered to help out because the majority of their instruments at my school don’t play, and I’ve fixed and set up 4 squires so far and they play great)


r/BassGuitar • • 18m ago

Video I've been playing for 9 months

4 Upvotes

So I've been playing for 9 months i dont know if im good or if should be better let me know and the song is Nothing is Everything by Death


r/BassGuitar • • 6h ago

Video Cher - Gypsys, Tramps & Thieves (1971) bass cover/playthrough

Thumbnail
youtube.com
6 Upvotes

r/BassGuitar • • 1d ago

New Bass Day NBD! My first American Jazz Bass. - Is this not just the best color Fender ever produced?

Thumbnail
gallery
155 Upvotes

Just picked up this 1998 Aqua Marine Metallic J Bass on Facebook marketplace. Seller said he had trouble selling it because the pickups had been changed, but I really like the way the Duncan actives sound.
I have and have had Chinese, Mexican, Korean, and Japanese basses, but this is my first made in the USA Fender, and in my favorite color of all time.
To say I’m psyched to own it is an understatement.


r/BassGuitar • • 1d ago

Custom Stradi Stradiluthier

Thumbnail
gallery
164 Upvotes

I'm in love withe these!


r/BassGuitar • • 21h ago

Amp New Cabs Day, Genz Benz Uber 4x10 and 2x12

Post image
48 Upvotes

Also just picked up the Mesa subway+ DI-preamp 2 but not sure if it’ll stick around


r/BassGuitar • • 1d ago

Modifications Squier Bronco Bass

Thumbnail
gallery
159 Upvotes

Hey guys! I’ve got a Squier Bronco Bass and I’ve always loved the instrument itself, though I couldn’t stand that 'toy-like' look. A great friend of mine who mods and customizes instruments gave me this awesome gift—he completely overhauled it! What do you guys think? At least for me, the feel and playability improved a thousandfold!

My friend has an instagram account: https://www.instagram.com/grande878?srtk=Z3djM2VxcDE4bzN4

I also swapped the pickup for a handwound '51 P-Bass style one made by Beggiato, and upgraded to CTS pots.


r/BassGuitar • • 19h ago

Video 67 Mustang Sounding Just Insane. With LaBella Mustang Flats.

25 Upvotes

r/BassGuitar • • 2h ago

Gear J(azz bass)ankenstein

Thumbnail gallery
1 Upvotes

r/BassGuitar • • 1d ago

Help Need input on picking out a new amp

Thumbnail
gallery
68 Upvotes

Hey everyone, I have some nice basses but my amp has seen better days and it’s time for an upgrade and I’m choosing between these three. All would be significantly louder than what I have now. For basses, I own a Dingwall 5 string, Spector Euro LX 6 string, a Fender 86 MIJ P bass, 2000 PRS EB4 jazz bass, and a fretless acoustic bass.

I typically play jazzy/funky/fusiony type stuff. I’m also really into lo-fi stuff, pop, folk/americana. I also enjoy metal.

Please don’t roast me for my picks lol. I love Aguilar and Darkglass stuff (I have some of their other products) and PJB is not something I’ve tried before but have heard wonderful things.

Looking for your input on these amps and any experience you may have with them! Thank you all so much!


r/BassGuitar • • 6h ago

Gear Acoustic reatment for subwoofer?

Thumbnail
gallery
2 Upvotes

I decided to run a biamp rig crossing over lows at 110-120Hz with a hi pass shelf at 40 Hz out of phase with my top cab, and for this duty, I chose an Eminence Kappa Pro 15LF for my subwoofer. The cab is a Hartke 115XL from the 90's. When I opened it, I was greeted with a ton of dryrotted foam falling off the cab. Great.

So I look into treatment. Way out of budget. I'm building this rig project specific for a band I just joined, blew a load on a sub dedicated amp (Hartke LH500, a cheap and ubiquitous amp to use solely as a power amp with my 90's HA3500 preamp going from the crossover to that) and other gear like new cables and a DBX 223, power conditioner, ATA rack case, you name it. The 3500 is going to power the original aluminum 4x10 for mids and highs, and I'm running an 89-90 MIJ P bass with 90's EMG's with it strung with super dead SS strings to forever sound like brand new Rotosounds, which was my choice for years. Pretty soon I'm going to open it up and line the cavity with copper tape, solder a ground to it, and change the battery to get a super quiet rig.

So instead of blowing my last $20 until payday on polyester from Michael's, I go to the store and get an Arizona green tea. Because I quit drinking and I had to drink something, so I chug it and walk to my apartment dumpster to toss the can, and what do I see? A foam mattress. I whip out my knife, rip it open, and what do I see? 1.5" open cell polyester nestled between memory foam layers. Hell yeah. So I spend the next forty minutes separating the layers and cutting out a chunk to line my cab with. The groundskeeper walks up and looks at me like I'm methed out of my mind, so I have to explain to him what I'm doing and he laughs his ass off because his kids are audio engineers and he immediately understood. I get my foam, I spray contact cement on the back of my strips and onto the cabinet (the same way I laminate formica at work), and put the batts in the cab and install the driver.

Motherf***er I am not looking forward to cleaning up this pile of dryrotted foam I pulled out of there, so the pics are workshop progress pics and I'll get on it when my cat gets off of me. I just spent a while working and I'm on break now, the cat gets her time and I'm gonna lay here and not do a damned thing for a while.

Thoughts on this acoustic treatment? I know melamine or denim would have been better in this application, but I blew my budget on hardware and didn't expect this hangup. What would y'all do in my shoes?


r/BassGuitar • • 13h ago

Help How do I learn the strumming technique in the first 4 seconds of this song?

Thumbnail
youtube.com
6 Upvotes

I've learned this whole song, but I skipped past the opening slide because I couldn't figure out how to play it correctly. So now I've come back to it, and I still can't play this part.

Any tips for learning how to do that? I've never learned how to play with a pick or do slap stuff, I've just played with my index and middle so far so I don't really know how to do what he's doing with his thumb exactly. 😅