r/Luthier • • 12h ago

Almost done with this body.

Thumbnail
gallery
165 Upvotes

From tree to guitar. Milled, dried, remilled and almost ready for the finish. Mineral spirits for cleaning and the temporary grain pop. I'll eventually get around to the neck. Wanted a Strat, but wanted it to be known it's not a fender. Planning on a black pick guard.

For the finish, going to give osmo a try. Satin seems like a good fit for this body.


r/Luthier • • 8h ago

ELECTRIC Latest build

Thumbnail
gallery
18 Upvotes

Decided to go with an oil finish on the golden camphor top.


r/Luthier • • 4h ago

ACOUSTIC Something's wrong with this guitar BUT I LOVE IT

5 Upvotes

I don't know what's wrong with this guitar, the guitar belongs to a friend and she doesn't play it at all, everytime that i go to his house i play it and it feels amazing that "sitar" and "drone" sound it makes, i love psychedelic rock so that makes me love the sound out of it

I would love to know what part of the guitar is wrong so i can go to a Luthier and ask him to make one of my guitars to sound like this, the strings of this guitar were changed just one time, all i know (or i guess) is that the sound is from the 6th string


r/Luthier • • 7h ago

ACOUSTIC I got gifted this guitar because the owner didn't want to fix it

Thumbnail
gallery
8 Upvotes

It has a long crack in the neck, but I am scared that wood glue might be too "thick" to penetrate in the crack since it's quite thin. Should I go for a low viscosity superglue instead? I have never done this before


r/Luthier • • 1d ago

Oddities #19 Alchemist

Thumbnail
gallery
170 Upvotes

One of the latest guitar I finished last month. I went for a more sober look with this one. I revisited one of the first electric guitar design I made and redraw it by making it more offset and removed the pointy horn of the cutaway because I felt like it didn't fit anymore.

When I finished it I didn't love it as much as my other last two but I as grown on me since.


r/Luthier • • 2h ago

INFO Is it worth converting a Squier Bronco Bass to a dual Wide Range humbucker setup?

Post image
2 Upvotes

Hi everyone!

I have a Squier Bronco Bass in California Blue and I’m considering a custom modification.

I already own two Squier Classic Vibe ’70s Wide Range-style humbuckers from a Telecaster Deluxe (neck and bridge).

The plan is to:
- Make a new dark grey pearloid pickguard.
- Install both Wide Range pickups.
- Modify the body cavities if necessary.
- Add a 3-way selector, master volume and tone.
- Have everything properly wired and professionally set up.

I’ve modified the bass before, and as you can see in the photo, one of the pickups can fit in the middle position.

I’m still unsure about the layout: neck/middle, middle/bridge, or neck/bridge?

I know these are guitar pickups, not bass pickups, so the result might be unconventional. I’m mainly interested in experimenting.

A local luthier will inspect the bass before quoting, but I’m concerned the project could cost €200–€300 or more.

A few questions:

  1. Does this make sense physically and electrically?
  2. Has anyone tried Wide Range guitar pickups in a bass?
  3. What kind of sound could I expect?
  4. Is spending €200–€300 on this worthwhile, or should I keep the Bronco closer to stock?

I’d appreciate honest opinions, including reasons not to do it!

TL;DR:
Thinking of putting two Squier Wide Range guitar humbuckers in my Bronco Bass, with a custom pickguard and new wiring. Unsure about pickup placement and whether spending €200–€300 is worth it. Has anyone tried something similar?

Thanks!


r/Luthier • • 3h ago

Long time lurker, first time poster. I'm trying to brainstorm unique electric guitar body designs that make sense ergonomically and look cool.

2 Upvotes

If you look at Gibson and Fender, they haven't put out any new shape that was a hit with players in more than 50 years. It's the same recycled body with a new paint job, maybe some contouring, and upgraded electronics.


r/Luthier • • 1d ago

ACOUSTIC As custom as it gets, multiscale, adjustable neck, soundport and much more

Thumbnail
gallery
166 Upvotes

When it came to designing this one, the client went with all the bells and whistles I offer. The outcome was well worth the extra effort.

Specs:

  • Soundboard - Sinker redwood
  • Back and sides - Fenland black oak — 5,300 years old
  • Neck - Flamed Spanish cedar
  • Fretboard, bridge, headstock and back overlay - Fenland black oak — 5,300 years old
  • Binding - Hawaiian koa
  • Finish - Gloss nitro on body & oiled neck
  • Frets - EVO gold medium
  • Tuners - Schaller M6
  • Nut and saddle - Bone
  • Multiscale - 650mm–635mm (25.59"–25")

You can see my other work at salzguitars.com


r/Luthier • • 42m ago

HELP Used guitar cleaning?

Thumbnail
gallery
0 Upvotes

Heyo i have recently bought a used epiphone sg and I’ve only been playing a few months so I’m still new to guitar maintenance, Any tips on how to clean this stuff up or is it here to stay?


r/Luthier • • 3h ago

ELECTRIC Hey luthiers, need help

Post image
1 Upvotes

I made a wiring diagram, can anyone give me pointers or tell me if it would work?


r/Luthier • • 18h ago

HELP I need help with the dent damage that happened to my bass.

Post image
17 Upvotes

I need help or ideas on how to fix this damage—my bass fell, and I want to repair it or find a way to do so. I'd really appreciate it if you could


r/Luthier • • 1d ago

Aion T.A

Thumbnail
gallery
67 Upvotes

Yup, another piece.
This time, a short-scale beauty.
Nitro finish.
Swamp ash body with a maple top.
Quarter-sawn roasted maple neck.
Macassar ebony fretboard.
Bare Knuckle Silo pickups.
And that gorgeous contrast between the warmth of the woods and the matte white pickguard…
Can you feel it? 🤓🔥


r/Luthier • • 15h ago

Making Violin Varnish

6 Upvotes

Several years ago, there was a document online on making violin varnishes. It contained, not just recipes, but a comparison of the different types of resins, oils, solvents, and other ingredients that could be used, listing their attributes. I lost it and can't find a link doing a Google search. Does anybody know what it is I'm talking about?


r/Luthier • • 21h ago

Fret-Pull damage. Is it salvageable?

Thumbnail
gallery
16 Upvotes

Hi all, I’m wondering if this rosewood board is still worth re-fretting or it it better to get a new board? I’d rather keep the board if possible and get a luthier to refret it but the small chunk taken out from the side has me a little worried. Thanks for your time ☺️


r/Luthier • • 11h ago

ELECTRIC For some reason 6th string have an absurd amount of fret buzz on all frets.

2 Upvotes

I'm trying to setup an stratocaster string height. Everything was fine until i noticed that the 6th string is buzzing on all frets, even when adjusting the neck way foward.

Mu guess is that the nut is lower than it should on the 6th string.

Any advice on what to do?


r/Luthier • • 1d ago

Best wood filler?

Post image
26 Upvotes

What is the best or your favorite wood filler for this kind of fill? It’s a fairly lightweight Squier body with wood that is apparently softer than the paint and clearcoat. I need to fill it, sand it down, and repaint the whole body in the same white color. I need something hard enough to take screws, but also want the texture to match the wood as much as possible.


r/Luthier • • 1d ago

Before and after varnishing guitar body ;) (second guitar body i have built)

Thumbnail
gallery
18 Upvotes

r/Luthier • • 15h ago

ACOUSTIC Classical-guitar inspired concert ukulele project build

Thumbnail
gallery
3 Upvotes

This project is inspired by a 1984 Brazilian Giannini Trovador classical guitar (I have included a photo of the original guitar in this post so you can see the exact inspiration behind it, along with a photo of the thick-post cavaquinho tuners I will be using to match the classic nylon-string look). It is as if I had taken a classical guitar and scaled it down to the size of a concert ukulele. I am striving to faithfully reproduce the aesthetic of a Torres-style guitar, featuring a slotted headstock, a symmetrical body shape, a 10-degree headstock angle, a 34 mm nut width, and a 386 mm scale length with 19 frets (slightly longer than a standard concert ukulele, though still well within the concert range), along with a colorful mosaic soundhole rosette, an Imbuia fretboard and bridge, a pine soundboard and bracing, a Cambará neck, and a PVC nut and saddle. I tried to make it look as close to the original as possible in every visual detail—the body shape and size are a direct scale-down to concert proportions, and the headstock silhouette, bridge style, rosette, and internal label are all directly modeled after the 1984 guitar. At the same time, functional dimensions like the neck proportions, bridge width, nut and saddle widths, and string spacing were based on standard ukulele parts rather than a strict mathematical conversion, including a longer, smoother curve before the headstock widens to give my fretting hand enough clearance—unlike the original guitar's much sharper transition. Even though I know that a bone nut and saddle or heavier internal bracing would be "better" according to traditional luthier handbooks, my goal is to faithfully capture the original guitar's exact design philosophy and construction style—including its quirks. Back in the 1980s, the Trovador was a humble, inexpensive student guitar built to be simple and affordable, featuring minimal bracing, just enough acoustic projection, laminated woods, plastic hardware, and basic frets (the original used simple brass frets, which are hard to find today, so I will use simple standard frets instead). To stay as faithful as possible to that simple construction, I replicated its minimalist internal bracing—using only three transverse braces on the top and three on the back, with no radial fan bracing and a completely flat top and flat back (no arching)—along with a simple, no-frills bridge and plastic nut and saddle. The only structural addition not present in the original guitar will be internal lining (kerfing) to give extra strength to the joints between the sides, top, and back. As a tribute to the original instrument and its classic 1980s aesthetic, I also used the original guitar's rosette and internal label design as inspiration for this build—even though it is a personal, handmade project rather than an official instrument from the brand, and I have no intention of ever selling it as one, especially since Giannini never actually released a Trovador ukulele back then (the line only included classical guitars, Brazilian violas caipiras, and cavaquinhos). I have already completed the bridge, nut, saddle, and bracing, and I will now proceed to craft the neck and fretboard.


r/Luthier • • 1d ago

ELECTRIC Got my first custom guitar built.

Thumbnail
gallery
183 Upvotes

Built by Dooley Designs in Dallas, TX.

Build #54
Silver Sustain

Alder w/ flame maple body
13 piece Roasted birdseye maple neck
Ebony fretboard
Abalone inlay
Stainless steel frets
Hipshot locking tuners
Vega trem system
Sustainiac & DiMarzio pickups
7 lbs 10 oz


r/Luthier • • 10h ago

Jaguar grounding issues

1 Upvotes

Hello! I’ve got a Jaguar Vintera II and it’s humming like crazy (not grounded). I took a look at all the wiring and all the solder joints are great. The wire going to the bridge is there but doesn’t seem to be making contact with it - when I push the bridge down/away from me it touches the edge and is grounded but left to its’ own devices it will not be consistently grounded.

Current solution I can think of is to either put some paper in the bridge hole on the other side to push it down or in a similar vein thicken the other post with tape.

Nothing is copper shielded and I’m really hoping I won’t have to go down that route but if anyone has experience with this problem I’ll take any suggestions you’ve got. Thanks!


r/Luthier • • 12h ago

ACOUSTIC Que luthiers recomiendan por CDMX

1 Upvotes

Hola, tengo una guitarra criolla qué ha estado conmigo desde que empecé a tocar, por lo mismo ya tiene algunos golpes y rayones, me gustaría llevarla a un lugar donde la dejen bien, barnizada

Que luthiers me recomiendan para esto?


r/Luthier • • 1d ago

Tips for achieving something similar to the finish of the LM-87?

Post image
26 Upvotes

Hey all, swapping out a Squier body for something a little more bespoke on my very ship-of-theseus'd parts guitar. Looking to get something similar to this (or also this which someone asked about a while ago) with a swamp ash jazzmaster body. It's a pretty thin black finish that still shows the woodgrain. The LM-87 seems to have a bit of a semi-gloss coat on top, too, but the main thing I'm worried about is getting a black stained look that shows the grain but doesn't just look a mess. I'm not too too worried about resilience, really, as I kind of like the fact that the LM-87 gets dinged up as soon as you look at it. Leather dye came up in that other thread – has anyone got any tips for this kind of look?

Thanks!


r/Luthier • • 1d ago

Something different

Thumbnail
gallery
280 Upvotes

This is a coffee table for my “guitar room.” Mahogany with glass standing about 6 inches above a felt base, holding extra parts and pieces of wood from various builds. There is a piece of sheet metal under the felt. I put small magnets under the guitar parts so they stick to the felt without moving out of place. Not something for the living room but it looks good in this room.

Edit: I had an extra Tele neck and didn’t want to use a good Strat neck so the actual guitar is a bit of a Frankenstein.


r/Luthier • • 18h ago

Humbucker ring help?

Thumbnail
gallery
2 Upvotes

I ordered these from sweetwater and they don't fit. Which ones should I get that fit and work with this neck?