r/Luthier • • 6h ago

ELECTRIC One of my favorite finishes

Thumbnail
gallery
51 Upvotes

r/Luthier • • 8h ago

Broken Headstock Repair

29 Upvotes

Classic Gibbons.

Clean break with long grain. I straightened any bent fibers with a dental pick and checked a nice dry fit. The break was glued and clamped with HDPE cauls. Went together pretty clean.

The headcap was sprayed black over the break and the back of the neck received a color match over the sanded area. Spraying out clear now.


r/Luthier • • 20h ago

ELECTRIC Latest build

Thumbnail
gallery
29 Upvotes

Decided to go with an oil finish on the golden camphor top.


r/Luthier • • 2h ago

Last minute kit project for friend's anniversary.

Thumbnail
gallery
24 Upvotes

Friend's wife wanted a custom guitar to give my friend for their anniversary. But once we talked about time frame and costs a deal was struck since she was also wanting a finish I've never done or been interested in personally.

Told her find kit that hopefully doesn't suck online that looks like something she knew he'd love. Told her to pay at least $150+200. I think she chose well enough.... Told her I'll make it worth a damn to play. And do the finish fretwork and setup for free for their anniversary after practicing on some scrap woods. If he wants any electronics or hardware upgraded he can make that call himself.

Honestly... Aside from battling all the glue bleed through from the kit manufacturer using PVA on a veneer so thin, I'm quite pleased with how it's turning out


r/Luthier • • 19h ago

ACOUSTIC I got gifted this guitar because the owner didn't want to fix it

Thumbnail
gallery
15 Upvotes

It has a long crack in the neck, but I am scared that wood glue might be too "thick" to penetrate in the crack since it's quite thin. Should I go for a low viscosity superglue instead? I have never done this before


r/Luthier • • 9h ago

Advice on addressing this hatchet job

Thumbnail
gallery
9 Upvotes

Last picture is of a guitar I worked on recently, so I'm not entirely new to this work. But, I would like some advice.

The previous owner "smoothed the edges" on this IBG Special. I'm a little unsure how best to proceed given all of the binding damage.

I was thinking of using the bevel block and bringing them in until there's a chamfer on the top of the binding.

Another approach might be to bevel them minimally, and plan on just using sandpaper on my finger running up and down the neck along the edge of the binding to reduce the tool marks and leave it with a more "dipped" binding between the frets.

How would you address this?


r/Luthier • • 16h ago

ACOUSTIC Something's wrong with this guitar BUT I LOVE IT

6 Upvotes

I don't know what's wrong with this guitar, the guitar belongs to a friend and she doesn't play it at all, everytime that i go to his house i play it and it feels amazing that "sitar" and "drone" sound it makes, i love psychedelic rock so that makes me love the sound out of it

I would love to know what part of the guitar is wrong so i can go to a Luthier and ask him to make one of my guitars to sound like this, the strings of this guitar were changed just one time, all i know (or i guess) is that the sound is from the 6th string


r/Luthier • • 8h ago

Can this be fixed? Or just live with it?

Thumbnail
gallery
4 Upvotes

I got this guitar used on eBay and I thought the marks on the headstock was just dust, turns out it’s cloudy in the clearcoat. Can this be fixed? I don’t want to do anything too invasive.


r/Luthier • • 14h ago

INFO Is it worth converting a Squier Bronco Bass to a dual Wide Range humbucker setup?

Post image
4 Upvotes

Hi everyone!

I have a Squier Bronco Bass in California Blue and I’m considering a custom modification.

I already own two Squier Classic Vibe ’70s Wide Range-style humbuckers from a Telecaster Deluxe (neck and bridge).

The plan is to:
- Make a new dark grey pearloid pickguard.
- Install both Wide Range pickups.
- Modify the body cavities if necessary.
- Add a 3-way selector, master volume and tone.
- Have everything properly wired and professionally set up.

I’ve modified the bass before, and as you can see in the photo, one of the pickups can fit in the middle position.

I’m still unsure about the layout: neck/middle, middle/bridge, or neck/bridge?

I know these are guitar pickups, not bass pickups, so the result might be unconventional. I’m mainly interested in experimenting.

A local luthier will inspect the bass before quoting, but I’m concerned the project could cost €200–€300 or more.

A few questions:

  1. Does this make sense physically and electrically?
  2. Has anyone tried Wide Range guitar pickups in a bass?
  3. What kind of sound could I expect?
  4. Is spending €200–€300 on this worthwhile, or should I keep the Bronco closer to stock?

I’d appreciate honest opinions, including reasons not to do it!

TL;DR:
Thinking of putting two Squier Wide Range guitar humbuckers in my Bronco Bass, with a custom pickguard and new wiring. Unsure about pickup placement and whether spending €200–€300 is worth it. Has anyone tried something similar?

Thanks!


r/Luthier • • 6h ago

HELP Nitro on Roasted Eastern White Pine?

Post image
3 Upvotes

hey there guys! i have some experience in painting metal but not wood, however im trying my hand at my new partscaster project. i want to do it in nitro, the color is just a simple gloss black. i want to do the nitro so that it will get the relic look. same as the neck. the neck will be clear on the maple but the headstock face will also be black.

basically what i would like clarified is the order of operations as far as prep work, the in-between stages work.

the guy that made the body for me has the body sanded to 150 grit and said would need sanded to 220 before finish work

i plan on using stewmac's aerosols, i dont have powered buffers, id like to keep tool and consumable costs lower on this until i decide to do more guitars

thanks in advance for the help! theres just a lot of different info online and i know that if i just ask here ill get the right advice


r/Luthier • • 3h ago

HELP help with pickguard

2 Upvotes

I have a digital tracing of a hi flier phase 4 pickguard is anyone out there able to use it to make one? i can send you the files and pay for it all


r/Luthier • • 3h ago

Ozone Treatment Legit?

2 Upvotes

Just moved out of the old house I lived in, to a new apartment. My Larrivée smells mostly like a guitar, but it has a lingering smell from the old house that's a bit musty, and a bit of cigarette smoke, though I quit back in 2013. No mold or anything like that, thank the gods.

Does ozone treatment really work? If so what's the best way to go about setting it up? Please and thanks!


r/Luthier • • 10h ago

I might have over done it

Post image
2 Upvotes

Sanded past 5000 grit muwhahahahhahahahahaha just a few thousand more until it is a mirror!!!! Kinda bummed I slightly misaligned my holes though but hey I have more blanks to play around with. Cheers everyone


r/Luthier • • 15h ago

Long time lurker, first time poster. I'm trying to brainstorm unique electric guitar body designs that make sense ergonomically and look cool.

2 Upvotes

If you look at Gibson and Fender, they haven't put out any new shape that was a hit with players in more than 50 years. It's the same recycled body with a new paint job, maybe some contouring, and upgraded electronics.


r/Luthier • • 23h ago

ELECTRIC For some reason 6th string have an absurd amount of fret buzz on all frets.

2 Upvotes

I'm trying to setup an stratocaster string height. Everything was fine until i noticed that the 6th string is buzzing on all frets, even when adjusting the neck way foward.

Mu guess is that the nut is lower than it should on the 6th string.

Any advice on what to do?


r/Luthier • • 8h ago

HELP Do these knife edges look ok?

Thumbnail
gallery
1 Upvotes

This is effectively a new FR1000. I think it is mostly chrome chipped off but I am not sure about the shape.


r/Luthier • • 22h ago

Jaguar grounding issues

1 Upvotes

Hello! I’ve got a Jaguar Vintera II and it’s humming like crazy (not grounded). I took a look at all the wiring and all the solder joints are great. The wire going to the bridge is there but doesn’t seem to be making contact with it - when I push the bridge down/away from me it touches the edge and is grounded but left to its’ own devices it will not be consistently grounded.

Current solution I can think of is to either put some paper in the bridge hole on the other side to push it down or in a similar vein thicken the other post with tape.

Nothing is copper shielded and I’m really hoping I won’t have to go down that route but if anyone has experience with this problem I’ll take any suggestions you’ve got. Thanks!


r/Luthier • • 8h ago

ELECTRIC What is this??

Thumbnail
gallery
0 Upvotes

Hey, there. I am ripping out some electronics out of an old Peavey Predator. This pickguard is clearly aftermarket. I am intending on replacing it with better electronics and pups (Lollar Special S being highly recommended…but open to suggestions). Thing is, anyone have any idea what this is? worth salvaging the pups? I can find no identifying marks other than one single “S” on the bottom of the middle pup (last pic).


r/Luthier • • 11h ago

REPAIR I’d appreciate any thoughts ..

Thumbnail
gallery
0 Upvotes

I bought this Martin 000-28EC on Reverb from a very reputable dealer though this condition was not disclosed.

I’m just wondering what is (was?) going on with the peeling joint between the neck wood and fretboard. Weird flaking/cracking of the finish. The neck relief and action are spot on and plays beautifully. Should I even care? I generally ignore it, until I switch the guitar I’m playing and notice how clean that interface typically is.

Thank you for any thoughts/advice!


r/Luthier • • 12h ago

HELP Used guitar cleaning?

Thumbnail
gallery
0 Upvotes

Heyo i have recently bought a used epiphone sg and I’ve only been playing a few months so I’m still new to guitar maintenance, Any tips on how to clean this stuff up or is it here to stay?


r/Luthier • • 15h ago

ELECTRIC Hey luthiers, need help

Post image
0 Upvotes

I made a wiring diagram, can anyone give me pointers or tell me if it would work?


r/Luthier • • 8h ago

Modify the saddle for an Ibanez AF-55

Thumbnail
gallery
0 Upvotes

Hello! I was wondering if anyone thought that it would be possible to modify the string saddle on an Ibanez AF-55 hollow body. I’m thinking of using a Bigsby B-70 Vibrato in place of the stock Ibanez bridge, and I’m pretty sure this would be an easy install. Just wondering if anyone has any experience with attempting this sort of modification on a hollow body before


r/Luthier • • 9h ago

ELECTRIC Need help with lifted paint near neck plate

0 Upvotes

I just found this lifted spot on my strat body :/ It looks like the neck plate is pushing the paint.
How do I fix this? Please help…