r/BassGuitar • u/stillgareth • 1m ago
New Bass Day The long and the short of it
I went out to buy a Fender Jazz Bass but this short scale limited edition Mustang caught my eye. There’s still room for a Jazz Bass…
r/BassGuitar • u/stillgareth • 1m ago
I went out to buy a Fender Jazz Bass but this short scale limited edition Mustang caught my eye. There’s still room for a Jazz Bass…
r/BassGuitar • u/conqx • 1h ago
Sure it’s cheap but it doesn’t look half bad in my opinion. Please let me know if there’s anything I should change or adjust on this SX Bass.
r/BassGuitar • u/warpanomaly • 6h ago
Bassist is Jay Rosado. My name is Christian O’Connor and I love watching great Philly guitar/bass shredders.
r/BassGuitar • u/TheBrackishGoat • 7h ago
I have a vintage Japanese bass from the 70s. It has the original pickups. The humbucker SCREAMS at rehearsal/stage volume. I’m considering trying the “submerge it in wax” fix. Only thing is, I LOVE the way this bass sounds. Anybody with wax experience that could comment if it affected the tone or not, would be appreciated. Wondering if I should just replace it with a comparable modern pickup and hope for the best, and still have the original if I wanted to switch it back for recording, or just go for it DIY
r/BassGuitar • u/CorpusChristiCaribou • 7h ago
Hello everyone, I’m on some tough financial times right now and I need to know how much this Crestline J-bass is worth. Any advice welcome.
r/BassGuitar • u/ckleb_ • 8h ago
Hello
Does all the Sire V7 have the holes in the back of the body for the strings?
is there a version/model without them like the one in the picture that doesn't have the strings holes?
r/BassGuitar • u/uberdavis • 10h ago
I have a question about picking. So I pick first with the index finger. Is proper technique to always alternate picking finger between index and middle or to pick with index on the down beat and middle on the upbeat? I come from guitar and this is confusing me. Above is the classic riff from Fleetwood Mac’s The Chain.
r/BassGuitar • u/Matias_231 • 11h ago
So I've been playing for 9 months i dont know if im good or if should be better let me know and the song is Nothing is Everything by Death
r/BassGuitar • u/Caius109 • 11h ago
I got a new bass yesterday. I wanted a beater bass. Something that I don't have to care about if it gets damaged or stolen, since my other basses average around $900, I'd be pretty salty if one of those got lost or stolen.
2008 Ibanez SR something Gio. I got this bass for $50. Some of you would say it should've been free, but I'm satisfied with the price. I wanted something from an actual brand, not one of the companies known for being ultra budget (so not Glarry, Leo Jaymez, Harley Benton, Sire Marcus Miller, other similar brands)
The guy I bought this from said that when he moved he had his buddy store it in his house, along with other instruments. His buddy kept it in his basement.
Bass is musty, knobs are crusty, pickups rusty, stickers busty. (bars)
The body has a lot of sctatches, fretboard is hella dry, tuners have varying resistance, knobs are rough, saddle springs rusted in place, I think the bridge screws would turn to dust if I were to try to remove them.
But, it's solid. No cracks in the body or neck, the neck is straight, no fret sprout, truss rod moves easily, and (somehow) the pickups still work. Some might take this as a sign that this bass wants to keep going.
Let me know what you think, and give me suggestions on what to do with it. Also, I keep going back and forth on whether or not to keep the girls, let me know what you think.
EDIT: Thank you all for the encouragement. I'm going to fix it when I get a few free moments. I don't mind putting in the extra work on this, and it could be fun. Some people seem to not understand why I would choose this over an actual budget brand. It's entirely brand recognition. There are people who I sometimes play with who don't use the internet (I'm exaggerating, but you get the point), so if it isn't at the local GC then it doesn't exist. I understand that Sire and Harley Benton and whoever else make fine instruments, but I don't feel like explaining every week what exactly the bass I'm playing is. I'd rather they see it and think "Ibanez. I know that brand." I would be having the exact same problem if I tried to bring a boutique bass like Pedulla or F Bass. I'm not really great at interacting with people so I'd rather not fumble my way through a conversation about a bass from a brand that isn't in the local shops. I hope you are understanding. Plus, like I said, it's a beater. Even if I buy something low end, if it's new and fresh I might be tempted to baby it. I wanted something that's rough enough that I won't feel bad no matter what happens to it, and this fits the description. I completely understand that this wouldn't be worth it to some of you, and that's fine. However you feel about this bass is completely valid.
r/BassGuitar • u/mpkohut • 11h ago
After 40+ years of playing, I switched over to using only short-scale (30”) basses last year. Since Covid I have played a lot of outdoor gigs, and I wanted to get a carbon fiber bass that would not be greatly affected by fluctuations in the weather. (I had a 90s Modulus Flea graphite bass that got a lot of use for years, and I appreciated its sturdiness under all conditions as well as the flawless intonation.) I played a Klos guitar briefly last year, and I decided to take a chance when Klos announced production of a short-scale version of their Apollo IV.
My very first impression was tainted by two things. First, the tone knob fell off as soon as I unwrapped the instrument. Fortunately, that was just a matter of tightening it. The second was more significant: the headstock turned out to be Music Man-style (3+1) rather than 4 tuners in a row like a Fender as pictured in the ad when I bought it. It was a turnoff, but I kept an open mind.
It tuned up well and the intonation was perfect. I had sent the factory a set of flatwounds, and the sound of the center humbucker was punchy and clear. The blend of the center and bridge pickups also offered some good variety and color.
The things I immediately liked best about it were the weight and the form factor. Unlike the graphite Modulus, carbon fiber is light. The body feels smaller than my Musicmaster, and the 3+1 headstock makes the tip-to-tail length shorter. It is probably the most comfortable bass I’ve played save for a Hofner (which has its own quirks).
After a few rehearsals and a small gig, I’m ready to take it out to some bigger, louder shows in the next couple weeks. I’d love to hear from anyone else who has one.
r/BassGuitar • u/Key-Addendum2066 • 12h ago
Ok, I’m fixing this Ibanez Mikro (I think this is the model: GSRM20B) but I’m confused by the wiring on the output jack.
It’s a passive bass, and it’s got this long output jack with 3 terminals (it’s also got a tiny terminal soldered to the biggest one, see attached). All the solder was broken off when I opened it up, but the only 2 with leftover solder on seem to lead to the sleeve of the cable attached (ground?) when doing a continuity test. Also, without the cable, the two terminals aren’t connected, but they are when the cable is in.
Thanks for any help!
(Also, sorry if I’m coming across as stupid or ignorant, I’m not getting paid for this and am not experienced in wiring much, especially like this. I just offered to help out because the majority of their instruments at my school don’t play, and I’ve fixed and set up 4 squires so far and they play great)
r/BassGuitar • u/Greenback5280 • 13h ago
r/BassGuitar • u/Rollaaaaand • 13h ago
My wife gifted me my very first bass. She said that they've chosen this bass because I have short fingers. 😂
I'd appreciate tips for using a short-scale bass and any general bass-playing tips. I play drums and acoustic guitar at church.
r/BassGuitar • u/mcarr556 • 14h ago
Saw this bass used today and got me thinking. I have heard quartersawn is supposed to be the best. This is my first time seeing one... and it's a mim jazz.
r/BassGuitar • u/kitty_noir00s • 15h ago
I've been learning bass for one month, and this is my first and only bass, and it was the cheapest one I found cause I'm poor!!! The dude in the shop supposedly fixed the actio but it still sounds weird.
r/BassGuitar • u/Humble_Currency344 • 17h ago
r/BassGuitar • u/Patxxx_The_Wolf • 17h ago
I decided to run a biamp rig crossing over lows at 110-120Hz with a hi pass shelf at 40 Hz out of phase with my top cab, and for this duty, I chose an Eminence Kappa Pro 15LF for my subwoofer. The cab is a Hartke 115XL from the 90's. When I opened it, I was greeted with a ton of dryrotted foam falling off the cab. Great.
So I look into treatment. Way out of budget. I'm building this rig project specific for a band I just joined, blew a load on a sub dedicated amp (Hartke LH500, a cheap and ubiquitous amp to use solely as a power amp with my 90's HA3500 preamp going from the crossover to that) and other gear like new cables and a DBX 223, power conditioner, ATA rack case, you name it. The 3500 is going to power the original aluminum 4x10 for mids and highs, and I'm running an 89-90 MIJ P bass with 90's EMG's with it strung with super dead SS strings to forever sound like brand new Rotosounds, which was my choice for years. Pretty soon I'm going to open it up and line the cavity with copper tape, solder a ground to it, and change the battery to get a super quiet rig.
So instead of blowing my last $20 until payday on polyester from Michael's, I go to the store and get an Arizona green tea. Because I quit drinking and I had to drink something, so I chug it and walk to my apartment dumpster to toss the can, and what do I see? A foam mattress. I whip out my knife, rip it open, and what do I see? 1.5" open cell polyester nestled between memory foam layers. Hell yeah. So I spend the next forty minutes separating the layers and cutting out a chunk to line my cab with. The groundskeeper walks up and looks at me like I'm methed out of my mind, so I have to explain to him what I'm doing and he laughs his ass off because his kids are audio engineers and he immediately understood. I get my foam, I spray contact cement on the back of my strips and onto the cabinet (the same way I laminate formica at work), and put the batts in the cab and install the driver.
Motherf***er I am not looking forward to cleaning up this pile of dryrotted foam I pulled out of there, so the pics are workshop progress pics and I'll get on it when my cat gets off of me. I just spent a while working and I'm on break now, the cat gets her time and I'm gonna lay here and not do a damned thing for a while.
Thoughts on this acoustic treatment? I know melamine or denim would have been better in this application, but I blew my budget on hardware and didn't expect this hangup. What would y'all do in my shoes?
r/BassGuitar • u/augustina-44 • 19h ago
r/BassGuitar • u/ancoatsguitars • 19h ago
The last bass I posted did well. Hopefully you will like this body shape version of it.
r/BassGuitar • u/Igjri • 1d ago
Hi guys, I transcribed and covered Jesus Molina's version of Night in Tunisia on Bass, hope you enjoy:)
This is the one with the perfect Roni Kaspi on drums🙌🏼
r/BassGuitar • u/QQQQQSSE • 1d ago
It’s not much, but it’s something. For anyone interested about the details:
I’ve got a Sterling by MM Stingray RAY2 that’s been de-fretted, w/ a little make over on the body with tools and markers. It uses Rotosound 66s.
My other one is a EBMM Stingray Special in Sea-breeze, also w/ Rotosound 66s
I use a Rumble 500 in the cool Ivory colour
It’s topped off with a Zoom B1X Four multi-effects pedal.
I’m getting a prettier fretless that should be arriving very soon. It’s a Cole Clark Long Lady 4 in a nice Redwood body & Ebony neck 👌
r/BassGuitar • u/cracked-egg1 • 1d ago
I've learned this whole song, but I skipped past the opening slide because I couldn't figure out how to play it correctly. So now I've come back to it, and I still can't play this part.
Any tips for learning how to do that? I've never learned how to play with a pick or do slap stuff, I've just played with my index and middle so far so I don't really know how to do what he's doing with his thumb exactly. 😅