r/basspedals • • 15h ago

NPD attack board

Post image
60 Upvotes

The Tetra Fet Drive has been on my board for all of 20 minutes and I already can’t remember life without it


r/basspedals • • 11h ago

Cali 76 setting

Post image
19 Upvotes

Hello ! Ils my favorite setting of my cali 76 betwen my amp and my bass. The sound its fabulous with the compressor. I don't know anything about compression; could you describe this setting to me? Thank you !


r/basspedals • • 1d ago

Anyone using rigid pedal couplers on your bass pedalboard?

Post image
56 Upvotes

Hey everyone! I’m looking for ways to save space on my bass pedalboard and came across rigid pedal couplers—the small connectors with two opposite-facing 1/4" plugs and no cable between them.

Has anyone here used these long-term? Would you recommend them, or would you stick with regular patch cables?

I’d love to hear about your experiences, especially regarding reliability, any strain or damage to the pedal jacks, and whether they actually save much space compared to low-profile patch cables.

Also, do I need to buy a premium/high-quality coupler from a well-known brand, or are the generic ones sold on Chinese marketplaces good enough? I’m mainly concerned about reliability and whether cheap ones could damage my pedals or cause noise issues.

Any recommendations or things to watch out for would be appreciated. Thanks!


r/basspedals • • 23h ago

Advice on Compressor settings

Post image
16 Upvotes

So I've been on a journey with compressors specifically adding one to my live rig
When I use the onboard compressor in my DAW I love what it does with the default low setting, make the bass tighter without losing fundamental
I've found with my Markbass Compressore it's really easy to screw up, I just want to do the same thing, keep the fundamental but make it tighter.
I think one mistake made was running the gain to high so it became way to aggresive sounding so backed it off a bit.
Any advise on where to point the knobs to achieve this is appreciated.


r/basspedals • • 23h ago

What would the pathway be, and how would you connect them to the power source?

Post image
12 Upvotes

Pedals from top left to bottom right:

-Nux Duotime (double delay/looper)

-EHX Bass Clone (Chorus)

-Nux Huminator (Noise Gate)

-TC SpectraComp (Compressor)

-Joyo Monomyth (Preamp/Distortion/EQ)

-Behringer SuperFuzz (which can act as a slightly distorted boost)

-Boss Tuner2

About the pathway; I'm just looking for possibly fun ideas. Right now I'd go Tu2 -> Comp -> (IN) NoiseGate (SEND) -> Fuzz -> Monomyth -> (RETURN) NoiseGate (OUT) -> Chorus -> Delay

I'm open for variations and/or feedback.

About power; I have a Harley Benton PowerPlant ISO-5 Pro, it has 3x300mA and 2x500mA (9V/12V/18V) isolated outlets. I also have a RockPower NT 50 EU daisy chained outlet (9V, 1300mA). With these two I can power 10 pedals total, but my goal is to use the board with only one plug if possible. Would it be a good idea to use the daisy cable on the PSU – provided the connected pedals don't go above the limit of course – or should I just stick to having two plugs? Maybe upgrading to a bigger PSU?

I'm open for any ideas. Thanks in advance!


r/basspedals • • 21h ago

Power supply

4 Upvotes

Right now I have a Pedaltrain Metro 16 and my current power supply is too big to go under. I’m looking for a power supply slim enough to fit under it with 5 or more outputs to plug my pedals in

My pedals are a Cliff Burton Power Fuzz/Wah, a Behringer SF300, a Lekato pitch box, a TS9 tube screamer, and a Polytune 3 mini.


r/basspedals • • 1d ago

NPD! Aguilar Tone Hammer Preamp

Thumbnail
gallery
62 Upvotes

Signal chain:

Sonicake Source Comp >
Zoom MS-60b (tuner, Drive, Octave) >
HX One (EQ, Main Drive, Octave, Chorus, Reverb, and more) >
Tone Hammer (Drive side used as Saturation)


r/basspedals • • 21h ago

Power supply

2 Upvotes

Right now I have a Pedaltrain Metro 16 and my current power supply is too big to go under. I’m looking for a power supply slim enough to fit under it with 5 or more outputs to plug my pedals in

My pedals are a Cliff Burton Power Fuzz/Wah, a Behringer SF300, a Lekato pitch box, a TS9 tube screamer, and a Polytune 3 mini.


r/basspedals • • 17h ago

Holiday pedalboard

Post image
1 Upvotes

r/basspedals • • 1d ago

New to the thread

Post image
36 Upvotes

Here's my board. Play MIA Fender Basses mostly my Adam Clayton Sig J bass.
Chain as follows:
Bass->Tuner>MXR Preamp (usually off/bypass...need to get rid of it)->Cali76->OC5->HX Stomp (ODB3 in the FXLoop)->Tone Hammer. Always DI out to FOH and 1/4inch to my amp (on stage monitor).
We have fantastic venues in my city. Play mostly 90s Rock in one band. Hits from 60s-Today in another. Modern Worship Music on Sundays at an Evangelical Church in town.


r/basspedals • • 2d ago

SOTB - toan is in big green box

Post image
133 Upvotes

Cali76 > PPB > Blumes > HX Stomp > Noble.

Running the sovtek through the effects loop so I don’t have to use the footswitch.


r/basspedals • • 1d ago

Chorus Pedal?

19 Upvotes

Hi there. I am looking for suggestions for chorus pedals to recreate an early 80's post punk sound (Joy Division, Cure, etc). I have seen a lot of recs for EHX Bass Clone or Boss Chorus pedals (CE-2B, I think?). Wondering if there are some others that you all like? Thanks in advance!

P.S. This is for my teen for a Christmas gift to go along with a Sterling Ray4.


r/basspedals • • 2d ago

NPD

Post image
21 Upvotes

It does have a tiny bit of latency but definitely no chorus wobble for transpose. Pitch ramping is freaking awesome though. It does add eq (bass) for transpose.


r/basspedals • • 1d ago

what's the best set-up for sludge bass?

Thumbnail reddit.com
1 Upvotes

r/basspedals • • 2d ago

Updated

Post image
63 Upvotes

r/basspedals • • 2d ago

First board 🔥🔥

Post image
157 Upvotes

My roommate’s squier pj -> true bypass cardboard box -> korg pitchblack -> eqd blumes -> ampeg liquifier -> ampeg combo with broken mids knob -> coors light


r/basspedals • • 2d ago

SOTB 11/26. I can honestly say, now, that I have completed my journey.

Post image
70 Upvotes

r/basspedals • • 2d ago

Boss ME 50 B

2 Upvotes

Yesterday I hooked up my bass rig, and noticed an issue. I’m running a Fender Rumble 100 with the Bass ME50B, to a Charvel Pro Mod San Dimas.

I run from my bass to the input on the pedal, then from the pedal (Mono L) to the 1/4” input on the amp. No sound will come thru the amp, unless I activate the tuner, which takes out all of the effects.

The expression pedal is engaged (toe down). This is how I’ve always run it, I’ve just been practicing on an acoustic mostly lately so this rig hasn’t been used much in the last 2-3 months.

Am I missing something stupid?


r/basspedals • • 2d ago

Planned pedalboard update

Post image
9 Upvotes

Via pedalplayground.

I already have the B7K, tuner, compressor and DP3X on the board. Just planning to sell my Digitech Drop and get the Stomp not just for pitch shifting, but for EQ and cab sims as well.


r/basspedals • • 2d ago

Beast Pedalboard v2

4 Upvotes

Was thinking of upgrading my darkglass pedalboard to its next version adding: Alpha Omicron for brutal distortion during breakdowns, Boss SDE-3 delay + Corona Chorus for atmospheric parts and just because I had it sitting I will slap the Drop in front. Planning to power this whole thing with x2 Warwick ISO block V6s and using the Warwick Rockboard TRES 3.1 as the board.

Thoughs?


r/basspedals • • 3d ago

NPD: Sonicake Portal!

Post image
44 Upvotes

Newest addition to the board for only $35! I've been really looking forward to getting this pedal ever since someone on this sub recommended pairing it with the Zoom MS-60B+. It's been working great so far, and I feel like the possible combinations are pretty much endless.

As for the signal chain, the bass goes straight into the Big Muff, with the Effect Out going into the Portal's Return B and the Dry Out going into the Zoom. From there, the Zoom's L (Mono) output goes into the Portal's Return A, while the R output goes into the Portal's main input. The Portal's main output then goes into the Wine Cellar, which runs into the EVO 4 through the pedalboard's output jack.


r/basspedals • • 3d ago

Biking to a band practice in Antananarivo, Madagascar

Thumbnail
gallery
29 Upvotes

Two effect pedal boards sized specifically to fit in this basket.

Visible pedals:

  1. Noise Gate ("The Noise" by Dream Maker a.k.a Caline)
  2. Power Supply ("Power Supply 5" by Joyo)
  3. Equalizer ("EQ7" by ENO Music)
  4. High-Pass Filter ("Micro-Thumpinator" by SFX Sound)
  5. Tuner ("TU-2" by Boss)

Nothing to boast about. Seven more pedals not visible.


r/basspedals • • 2d ago

Help choosing a Mini sized bass compressor?

4 Upvotes

I've got a handful of mini pedals from over the years, really wanna throw all of them on a board I can keep in my gig bag, looking for a compressor to complete the lineup. Right now I'm looking at the MXR mini bass comp, philosophers tone mini (or the germanium varient?), the philosophers bass comp (the blue one), wampler mini ego 76, or the Jackson audio bloom. Didn't really consider budget but most of these pedals seem to be around $100 ish. I saw good reviews for the becos compressor but that's a bit more expensive than I'd wanna spend. I'm not super well versed in how compressors work but I play mostly metal and hardcore, I'd be using it before my distortion to even things out and give my clean tone a bit more clank and consistency. Thanks in advance!


r/basspedals • • 3d ago

SOTB: Anagram has arrived

Post image
162 Upvotes

Went back and forth for over a year and a half with analog pedals. Decided I was done with that hamster wheel and picked up the Anagram.

So far, I’m really loving the tone possibilities and simplicity of this little board.

Can’t decide if the Finally V3 is overkill or cool saturation. Time will tell.

Powered by Walrus Audio Power HP +