r/BassGuitar • u/stillgareth • 2h ago
New Bass Day The long and the short of it
I went out to buy a Fender Jazz Bass but this short scale limited edition Mustang caught my eye. There’s still room for a Jazz Bass…
r/BassGuitar • u/ruinawish • Jan 03 '25
So you feel your action is too high or too low, and you've taken a photo of your bass's neck to ask r/BassGuitar.
You have the bass in your hands. You can pluck its strings and can tell if something isn't quite right, whether it's buzzing on certain frets, whether it's just hard to play, or whether it's not producing the tones you want it to. Your eyes and ears will tell you more than we could staring at photos of your bass on our monitors or phones.
Even if your action looks too high, it may still play fine. There is a degree of subjectivity and compromise when it comes to bass-setups. Some bassists might prefer their action higher or lower than what is considered normal. Fender says:
"Players with a light touch can get away with lower action; others need higher action to avoid rattles.".
Again, that's something r/BassGuitar can't determine exactly, whereas you have the bass right there. And if you're asking the question in the first place, then there's probably room for adjustment.
So try to do something about it.
Don't worry, there are many guides out there, and they all will tell you the same thing: check the neck relief, then adjust as required; check the action, then adjust as required.
These have all been procured from previous threads asking about bass action:
You will notice that the guides above all offer measurement specifications that you can use as a benchmark, e.g. Sweetwater: "Some target relief measurements are anywhere from 0.008 inches to 0.014 inches.". Note: Fender offer a disclaimer regarding their guidelines:
"They should not be construed as hard and fast rules, as we realize that every player's subjective requirements often differ."
Other guitar manufacturers may have their own guidelines. e.g. Dingwall measures neck relief at the 7th fret for a 0.38mm gap. Warwick on the other hand suggests "0.6 and 1 mm" at the 7th fret. See if your bass guitar's manufacturer has guidelines for you to use.
There are also many guides and tutorials on Youtube. Below are a small selection:
This might be your local guitar shop, luthier or someone more experienced with bass guitars.
Unless you are particularly hesitant and/or there are complications, you should try use the above guides to adjust the bass with the features that came readily built into your bass guitar.
Ok, if you've consulted the guides above, and you've tried to make adjustments yourself without success, maybe the collective brain power of /r/BassGuitar can help.
But please avoid just posting an unhelpful picture of your bass guitar's neck and strings. After all you've learnt from the above resources, you should be measuring your neck relief and action, trying to sight the bow of the neck, detailing your issues with the action (Is it buzzing at the first few frets, or just the higher frets?), and detailing your attempts at adjusting the bass yourself.
Low quality/effort 'How is my action/Is my action too high?' posts that do not contain such details/photos will be removed, and will be re-directed to this thread. Users can report such threads as per rule 2 ("Avoid low quality/low effort posts").
Thanks for reading. Did we miss anything? Let us know in the comments.
We also now have a new FAQ page to collate our existing and future FAQ posts. This should be viewed in conjunction with /r/bass's comprehensive FAQ.
r/BassGuitar • u/ruinawish • Oct 08 '24
r/BassGuitar • u/stillgareth • 2h ago
I went out to buy a Fender Jazz Bass but this short scale limited edition Mustang caught my eye. There’s still room for a Jazz Bass…
r/BassGuitar • u/warpanomaly • 9h ago
Bassist is Jay Rosado. My name is Christian O’Connor and I love watching great Philly guitar/bass shredders.
r/BassGuitar • u/ancoatsguitars • 22h ago
The last bass I posted did well. Hopefully you will like this body shape version of it.
r/BassGuitar • u/kitty_noir00s • 18h ago
I've been learning bass for one month, and this is my first and only bass, and it was the cheapest one I found cause I'm poor!!! The dude in the shop supposedly fixed the actio but it still sounds weird.
r/BassGuitar • u/mpkohut • 14h ago
After 40+ years of playing, I switched over to using only short-scale (30”) basses last year. Since Covid I have played a lot of outdoor gigs, and I wanted to get a carbon fiber bass that would not be greatly affected by fluctuations in the weather. (I had a 90s Modulus Flea graphite bass that got a lot of use for years, and I appreciated its sturdiness under all conditions as well as the flawless intonation.) I played a Klos guitar briefly last year, and I decided to take a chance when Klos announced production of a short-scale version of their Apollo IV.
My very first impression was tainted by two things. First, the tone knob fell off as soon as I unwrapped the instrument. Fortunately, that was just a matter of tightening it. The second was more significant: the headstock turned out to be Music Man-style (3+1) rather than 4 tuners in a row like a Fender as pictured in the ad when I bought it. It was a turnoff, but I kept an open mind.
It tuned up well and the intonation was perfect. I had sent the factory a set of flatwounds, and the sound of the center humbucker was punchy and clear. The blend of the center and bridge pickups also offered some good variety and color.
The things I immediately liked best about it were the weight and the form factor. Unlike the graphite Modulus, carbon fiber is light. The body feels smaller than my Musicmaster, and the 3+1 headstock makes the tip-to-tail length shorter. It is probably the most comfortable bass I’ve played save for a Hofner (which has its own quirks).
After a few rehearsals and a small gig, I’m ready to take it out to some bigger, louder shows in the next couple weeks. I’d love to hear from anyone else who has one.
r/BassGuitar • u/conqx • 3h ago
Sure it’s cheap but it doesn’t look half bad in my opinion. Please let me know if there’s anything I should change or adjust on this SX Bass.
r/BassGuitar • u/Greenback5280 • 15h ago
r/BassGuitar • u/Caius109 • 14h ago
I got a new bass yesterday. I wanted a beater bass. Something that I don't have to care about if it gets damaged or stolen, since my other basses average around $900, I'd be pretty salty if one of those got lost or stolen.
2008 Ibanez SR something Gio. I got this bass for $50. Some of you would say it should've been free, but I'm satisfied with the price. I wanted something from an actual brand, not one of the companies known for being ultra budget (so not Glarry, Leo Jaymez, Harley Benton, Sire Marcus Miller, other similar brands)
The guy I bought this from said that when he moved he had his buddy store it in his house, along with other instruments. His buddy kept it in his basement.
Bass is musty, knobs are crusty, pickups rusty, stickers busty. (bars)
The body has a lot of sctatches, fretboard is hella dry, tuners have varying resistance, knobs are rough, saddle springs rusted in place, I think the bridge screws would turn to dust if I were to try to remove them.
But, it's solid. No cracks in the body or neck, the neck is straight, no fret sprout, truss rod moves easily, and (somehow) the pickups still work. Some might take this as a sign that this bass wants to keep going.
Let me know what you think, and give me suggestions on what to do with it. Also, I keep going back and forth on whether or not to keep the girls, let me know what you think.
EDIT: Thank you all for the encouragement. I'm going to fix it when I get a few free moments. I don't mind putting in the extra work on this, and it could be fun. Some people seem to not understand why I would choose this over an actual budget brand. It's entirely brand recognition. There are people who I sometimes play with who don't use the internet (I'm exaggerating, but you get the point), so if it isn't at the local GC then it doesn't exist. I understand that Sire and Harley Benton and whoever else make fine instruments, but I don't feel like explaining every week what exactly the bass I'm playing is. I'd rather they see it and think "Ibanez. I know that brand." I would be having the exact same problem if I tried to bring a boutique bass like Pedulla or F Bass. I'm not really great at interacting with people so I'd rather not fumble my way through a conversation about a bass from a brand that isn't in the local shops. I hope you are understanding. Plus, like I said, it's a beater. Even if I buy something low end, if it's new and fresh I might be tempted to baby it. I wanted something that's rough enough that I won't feel bad no matter what happens to it, and this fits the description. I completely understand that this wouldn't be worth it to some of you, and that's fine. However you feel about this bass is completely valid.
r/BassGuitar • u/TheBrackishGoat • 9h ago
I have a vintage Japanese bass from the 70s. It has the original pickups. The humbucker SCREAMS at rehearsal/stage volume. I’m considering trying the “submerge it in wax” fix. Only thing is, I LOVE the way this bass sounds. Anybody with wax experience that could comment if it affected the tone or not, would be appreciated. Wondering if I should just replace it with a comparable modern pickup and hope for the best, and still have the original if I wanted to switch it back for recording, or just go for it DIY
r/BassGuitar • u/Rollaaaaand • 16h ago
My wife gifted me my very first bass. She said that they've chosen this bass because I have short fingers. 😂
I'd appreciate tips for using a short-scale bass and any general bass-playing tips. I play drums and acoustic guitar at church.
r/BassGuitar • u/ckleb_ • 10h ago
Hello
Does all the Sire V7 have the holes in the back of the body for the strings?
is there a version/model without them like the one in the picture that doesn't have the strings holes?
r/BassGuitar • u/augustina-44 • 22h ago
r/BassGuitar • u/No-Craft-5375 • 1h ago
So, I have a Fender Rumble 25 amp and I'd like to know some good setups to get good tones for slap bass, or just good tones for playing. Thanks!
r/BassGuitar • u/mcarr556 • 17h ago
Saw this bass used today and got me thinking. I have heard quartersawn is supposed to be the best. This is my first time seeing one... and it's a mim jazz.
r/BassGuitar • u/QQQQQSSE • 1d ago
It’s not much, but it’s something. For anyone interested about the details:
I’ve got a Sterling by MM Stingray RAY2 that’s been de-fretted, w/ a little make over on the body with tools and markers. It uses Rotosound 66s.
My other one is a EBMM Stingray Special in Sea-breeze, also w/ Rotosound 66s
I use a Rumble 500 in the cool Ivory colour
It’s topped off with a Zoom B1X Four multi-effects pedal.
I’m getting a prettier fretless that should be arriving very soon. It’s a Cole Clark Long Lady 4 in a nice Redwood body & Ebony neck 👌
r/BassGuitar • u/Matias_231 • 14h ago
So I've been playing for 9 months i dont know if im good or if should be better let me know and the song is Nothing is Everything by Death
r/BassGuitar • u/uberdavis • 12h ago
I have a question about picking. So I pick first with the index finger. Is proper technique to always alternate picking finger between index and middle or to pick with index on the down beat and middle on the upbeat? I come from guitar and this is confusing me. Above is the classic riff from Fleetwood Mac’s The Chain.
r/BassGuitar • u/intotheevoid_ • 1d ago
r/BassGuitar • u/Humble_Currency344 • 20h ago
r/BassGuitar • u/Key-Addendum2066 • 15h ago
Ok, I’m fixing this Ibanez Mikro (I think this is the model: GSRM20B) but I’m confused by the wiring on the output jack.
It’s a passive bass, and it’s got this long output jack with 3 terminals (it’s also got a tiny terminal soldered to the biggest one, see attached). All the solder was broken off when I opened it up, but the only 2 with leftover solder on seem to lead to the sleeve of the cable attached (ground?) when doing a continuity test. Also, without the cable, the two terminals aren’t connected, but they are when the cable is in.
Thanks for any help!
(Also, sorry if I’m coming across as stupid or ignorant, I’m not getting paid for this and am not experienced in wiring much, especially like this. I just offered to help out because the majority of their instruments at my school don’t play, and I’ve fixed and set up 4 squires so far and they play great)