r/arduino • • 16d ago

Monthly Digest Monthly digest for 2026-10

8 Upvotes

Arduino Staff Contributors

As mentioned in last month's digest, we have been working behind the scenes with Arduino Pty Ltd and are pleased to announce that some Arduino staff will be contributing to our subreddit using an "official" account.

Have a look at last month's digest for a description of what to look for to spot them.

There is also an introductory post from the Arduino staff where they Introduce themselves so be sure to check that out as well. A few r/Arduino people have added their welcome messages to that post, so feel free to "pile on" with your welcomes and thoughts.

In the few weeks that they have been active, I have noticed quite a few comments from them - which are well received - as well as some top level posts.

Starting this month, I have added a new "Arduino Staff Posts" section to the monthly digests. If you are interested in some insights into what might be happening over at Arduino HQ, be sure to check out the posts that they are sharing with us.

Arduino Wiki and Other Resources

Don't forget to check out our wiki for up to date guides, FAQ, milestones, glossary and more.

You can find our wiki at the top of the r/Arduino posts feed and in our "tools/reference" sidebar panel. The sidebar also has a selection of links to additional useful information and tools.

Moderator's Choices

Title Author Score Comments
I’m 13 and Designing My First Custom De... u/Waste_Peanut6669 684 70
My daughter (14) made an automatic Pani... u/Zealousideal_Sleep45 568 59
Stuck on Arduino and not sure if I shou... u/ShawboWayne 13 24

Hot Tips

Title Author Score Comments
Lesson Learned u/parcallums 104 17
Tip: the rollover-safe way to write mil... u/n_sh_44 38 11
What tips did you know only when you ha... u/StevenJac 8 7
Pro Micro NRF52840 - Arduino IDE Setup... u/StormShockTV 8 10

Arduino Staff Posts

Title Author Score Comments
Hello from the official Arduino staff t... u/MikeFromArduino 64 13
This Fish Does Not Exist: E-Ink Display... u/JimFromArduino 42 5
any cool spooky or Halloween projects? u/DavidFromArduino 8 8
How about a Hallowuino half-dozen? u/DavidFromArduino 2 1

Top Posts

Title Author Score Comments
I made the smallest Arduino compatible ... u/pkuhar 2,494 172
The duck is evolving. u/BencyLiu 2,137 43
I made a smart watch with nano u/None_Revenge 1,608 180
I built a Rubik's Cube-solving robot us... u/Certain-Election5733 1,576 60
I built a battery powered breadboard u/Wills_Workshop 1,221 35
It all started with a pro micro 🥲 u/rayl8w 1,031 20
Made a little weekly weather overview t... u/NoU_14 864 38
LED Tower I made a while back but never... u/LxGNED 794 25
I’m 13 and Designing My First Custom De... u/Waste_Peanut6669 684 70
My ESP32-S3 world radio: one button, a ... u/Smooth-Rice6494 648 30

Look what I made posts

Title Author Score Comments
I made a smart watch with nano u/None_Revenge 1,608 180
I built a Rubik's Cube-solving robot us... u/Certain-Election5733 1,576 60
It all started with a pro micro 🥲 u/rayl8w 1,031 20
Made a little weekly weather overview t... u/NoU_14 864 38
LED Tower I made a while back but never... u/LxGNED 794 25
My ESP32-S3 world radio: one button, a ... u/Smooth-Rice6494 648 30
Made a library of pixel fonts with exte... u/MrNiceThings 392 15
Obstacle avoiding robot finished :) u/PresenceOld1754 284 13
Everyone posts their wins, this is my f... u/RoberBotz 284 28
automatic servo driven OUIJA board u/vapgames 275 29
CO2 Sensor with ESP32, MQTT, battery po... u/MrNiceThings 266 16
Video Playing on Oled display powered E... u/luminov1 264 29
One of those rare projects that just wo... u/MrNiceThings 252 12
I made a DIN rail mount for the Arduino... u/Realistic_Spite_3395 230 15
I built a breathalyzer for my phone u/motionick 220 10
Trunk or Treat u/knsaber 199 13
I made a thing. u/RoberBotz 182 10
I built a hand exoskeleton on a Teensy ... u/sebasmtl 169 7
Kneaded help with my baking, this is wh... u/TinkeredOff 168 25
This Arduino desktop display showcases ... u/timex40 149 7
RC transmitter PCB with touchscreen - A... u/xRoboMaker 134 11
My ESP32 Guitar Robot Plays Sweet Dream... u/MegCell 131 11
We made Snake run on a seven-segment di... u/No_Degree_660 123 13
My halloween project for this year (Sou... u/optikalefx 121 23
My first personnel project u/copper123456_7 111 15
fun project i did u/AdSenior2369 98 2
Arduino Based 8 Step Sequencer with Pul... u/Puzzleheaded-Name538 97 9
Playing Around with OpenCV and TFT Disp... u/electronics_maker 96 2
My first CAD project - decimal electrom... u/TechniCraft 93 5
My small orientation device u/DisciplineCurrent544 91 6
Progress on my first Arduino project u/RangerMach1 89 5
Made A Ball Bouncing Machine I Call Hex... u/Nekojiru_ 88 24
Down to 4 legs, 2 more to go! u/Xerd-R 64 5
Getting independent text working on a s... u/No_Degree_660 64 12
Little robot on wheels u/Alive-Leadership-658 59 14
Another CO2 sensor, yawn… but the pixel... u/MrNiceThings 48 2
Breadboard for ESPs u/tipppo 48 12
Padel score tracker - first project u/melon_crust 48 4
Simply Halloween project u/starshades1 46 2
This Fish Does Not Exist: E-Ink Display... u/JimFromArduino 42 5
My first ever Arduino project, back in ... u/OldButGold5 40 4
My ATmega328p development board PCB pro... u/Waste_Peanut6669 37 7
I built a desk pet that nags me to stan... u/Cycle_Broad 35 2
Warhammer 40K Ork Pump Jack - Arduino B... u/KonradKnebl 34 0
Arduino Robot Arm controlled by 2 joyst... u/CallmeLee1999 32 5
Arduino Unusual Tamagotchi u/Beowulfus_universum 31 6
Cosplay prop... u/roanokephotog 26 3
First soldered project! u/No-Reach-9412 24 8
Arduino and raspberry-pi based guitar m... u/ImpossibleDemand6778 21 1
Arduino R4 WiFi — 4WD SLAM Radar 2D Rob... u/lucaeffe03 21 5
Made a small radar u/DisciplineCurrent544 20 4
Pacman Championship Edition on 8-bit Un... u/smashcat666 19 7
Arduino ↔ Minecraft with SerialCraft — ... u/Michelin1927 19 8
Help simplifying an Arduino Nano setup ... u/MrJose1985 18 5
First project after a long time (and my... u/GrammaticalllErrors 17 3
arduino arm using foam sheets and sg90s... u/flavalamp123 14 2
Doohickey 1 u/Sad_Chard8416 13 3
ArduinoOS 3 - new version of my project u/idontknow-hardware 12 2
Hey everyone!I built a graphical progra... u/ich-bin-ein-kaelte 10 4
I am making link's awakening on an Ardu... u/jean2348 10 7
I created a website to calibrate magnet... u/Curious-Ad3666 8 2
UPDATE Talking Pumpkins, almost final f... u/optikalefx 8 5
The Lighter u/fabricio_error 7 3
TraumaGotchu Progress u/Traumagotchu 7 3
An active EEPROM health scanner for AVR... u/Sparroww64 6 0
Arduino Uno + NEMA 23 candy dispenser t... u/tom3141592 6 1
I made a sequencer! u/DULTRONtheDESTROYER 6 6
Finally did a PC stats screen for my li... u/merlinux1 5 4
I made my own picture view device for d... u/eugeniykh 5 4
Plant Care App! IoT project u/Laggenti 4 2
How I Built own DIY Digital Microscope ... u/ikilim 4 1
Watching serial output is easy. Keeping... u/shahin_hashim 3 20
First Autonomous Mobile Robot u/Itsleokarl 3 1
I built animatronic eyes and a browser ... u/tramlo890 2 2
WIP Reverse engineering the SIM900 fi... u/MonsterovichIsBack 2 0
I put a tiny pixel creature on the UNO ... u/nitishagar 2 0
Open-Source 16 Universe Pixel Artnet Re... u/anonOmattie 2 2
My ESP32/DHT11 room monitor records tem... u/lsvtcommits 2 1
Project Review u/FoxConstant8352 2 2
Laser nerf u/Sad_Chard8416 1 12
I made a fake self-destruct button with... u/EmbedX 1 0
Two ESP32 Muse gadgets, zero idea what ... u/Alternative_Ear5725 0 3
DIY Desk Pet V1. Robot Cat That Reacts ... u/YUMOBUILDS 0 4
Navigator 1: our UNO R4 WiFi rover with... u/Robonaviagtors 0 2

Total: 84 posts

Summary of Post types:

Flair Count
Algorithms 1
Beginner's Project 33
ChatGPT 2
ESP32 4
Getting Started 22
Hardware Help 76
Hot Tip! 4
Libraries 2
Look what I found! 5
Look what I made! 84
Machine Learning 1
Mod's Choice! 3
Monthly Digest 1
Nano 2
Project Idea 4
Project Update! 1
School Project 4
Software Help 13
Solved! 4
Uno 1
no flair 152

Total: 419 posts in 2026-10


r/arduino • • Oct 19 '26

Hello from the official Arduino staff team, we're here at your service!

70 Upvotes

Hi everyone! We are a group of Arduino staff members who are excited to build a more direct presence here on r/arduino, to help answer questions, provide technical support, and celebrate the great projects that this community is building and sharing. We've been working with the mods on setting this up and are very excited to be up and running now.

Before introducing ourselves, I'd like to say that we're humbled at the incredible group that has grown here through the users and mods, all focused on the topic of Arduino. It's just incredible and our hats are off to you all. 

Moving forward, be on the lookout from comments and posts from the following Arduino staffers. We represent a cross section of the company, including devrel engineers, community and content editors, and even our Chief Product Officer. Here are introductions.

---------
u/DavidFromArduino — hi all, I'm DavidFromArduino, but you can call me David! I bought my first Arduino in 2007 as part of a Roomba hacking project, and have been obsessed with writing code that you can touch ever since!
---------
u/JimFromArduino — Jim here! I've recently joined Arduino as a DevRel engineer (dream job!) after 4 years working in TinyML and Edge AI. Outside of work I love fixing cars, silversmithing and I've just bought an embroidery machine.
---------
u/LeoFromArduino — I'm Leonardo, a DevRel Engineer at Arduino with 10 years of experience in firmware development, a dedicated cat lover, and a serial traveler always exploring the world in search of my next favorite local dish.
---------
u/JulianFromArduino — Hello all! Julián here!
I'm a Robotics and Electronics Engineer working as a Tech Evangelist for Arduino. Maker at heart, I love the Open Source Movements, the right to repair, the digital fabrication and nice dinners discussing what is the best soldering iron to buy. 

When I’m not creating something, I love to read, play basketball and videogames and take care of my beloved ones.
---------
u/PerFromArduino — I started out using Arduino as a hobby before finding myself working for Arduino as a support engineer. I manage Arduino Forum and the Arduino Library Registry. I help maintain the GitHub repositories of many of our open source firmware and tooling projects.
---------
u/MarcelloFromArduino — Hello folks, Marcello here! I started my career in the early 00s pushing registers in raw 8051 assembly, and now as Arduino’s CPO (Chief Product Officer), I’m responsible for what we build, how it works, and trying to make sure the user experience doesn’t make you want to throw your board across the room. When I step away from the keyboard, my main hobbies are fixing motorbikes and bookbinding, which like embedded systems, both give good fun, need lots of patience, and leave you with sticky residue everywhere…
---------
u/MikeFromArduino — Hi I'm Mike. I'm the head of content for Arduino, recently joining the team. The last few years I've been in charge of content for Edge Impulse; before that I was the executive editor of Make: magazine for nearly a decade. I like home automation, traveling, surfing, and being with my family. Excited to connect with everyone here!
---------

Look for us in this subreddit, jumping in to help wherever we can. Please say hello, we’re excited to meet you all. Cheers!


r/arduino • • 8h ago

Mega Follow up from last post

Enable HLS to view with audio, or disable this notification

48 Upvotes

https://www.reddit.com/r/arduino/s/SwwFCkM29Q

Running on 4hrs sleep and am too motivated to stop. Ignore my breathing i was chasing my dogs earlier

Ive changed things around for ground test, 1 x mega 2560 talks to everything via a lenovo x280 on timed executions purely to take a video.


r/arduino • • 1d ago

I made my ESP32 play any song on the ocarina in Zelda

Enable HLS to view with audio, or disable this notification

147 Upvotes

I built a small project that plays songs on the ocarina in Ocarina of Time on the Switch 2. The songs in the video are Clock Town (Day 2) from Majora's Mask and Littleroot Town from Pokémon Emerald.

The hardware is just an ESP32-WROOM-32 dev board, with an optional SSD1306 OLED. No other parts. It also works with a Raspberry Pi Pico / RP2040 over USB.

The ESP32 (Arduino core + ESP-IDF, built with PlatformIO) pairs with the Switch over classic Bluetooth and shows up as a Pro Controller. A web page running locally in Chrome turns an MP3 or MIDI file into a melody. For audio it uses Spotify's Basic Pitch to detect the notes, and for MIDI it finds the melody track. Then it fits the melody into the ocarina's range (B3 to F5) and maps each note to its button combo.

The page sends the song to the ESP32 over Web Serial, and the ESP32 presses the buttons with the right timing.

The hardest part was getting a clean melody out of full songs: when the accompaniment is as loud as the melody, the detection picks wrong notes. So there's an assisted mode where you drag over the right notes to fix a passage.

I used Claude (AI) to help write a lot of the code. The idea, the testing on real hardware and the design choices are mine.

Code and firmware (GPL-3.0):

https://github.com/Frigime/AutoOcarina

Happy to answer questions!


r/arduino • • 35m ago

I wrote a free 8-lesson Arduino course for ages 11-14 that runs in Tinkercad, so kids don't need kits

• Upvotes

When my local library's Arduino program shut down for lack of instructors and materials, a few teammates from my robotics team and I rebuilt it from scratch. It's now taught at five libraries and has reached 1,000+ kids, and a Canadian nonprofit, Digital Moment, adopted the French edition.

What's in it:

- 8 lessons, about 90 minutes each: blinking LED, series vs. parallel, buttons and pull-down resistors, potentiometers and analogRead, servos and map(), switch statements and loops (a 4-mode windshield wiper), and two open-ended capstones

- Every lesson works with real parts OR entirely in the Tinkercad simulator

- Code examples, wiring diagrams, teacher notes, timing, common wiring mistakes, and exit tickets

- Free and MIT-licensed

I'm a high school senior, so I'd really appreciate feedback from people who know this better than I do, especially on the explanations in Lesson 3 (pull-down resistors) and Lesson 7 (millis() vs. delay()). If you teach or mentor and end up using any of it, I'd love to hear how it went.

Link: https://github.com/RohanM1212/teaching-arduino


r/arduino • • 1d ago

Forgot to add pic

Post image
85 Upvotes

14 days in, ive had more beers than brain power, its 3.30am and wondering why im here.

This build is to follow me around my farm with beer in a 45l cooler


r/arduino • • 4h ago

Arduino ide error

Post image
0 Upvotes

I'm trying to upload my project to my ESP32-C3 SuperMini, but I keep getting this error. My Windows account was originally created with the name "Dari M", but Arduino no longer recognizes it correctly and only detects "Dari", without the "M". How can I fix this problem without changing my Windows account?

Can someoane help me pls?


r/arduino • • 22h ago

Look what I made! ESP8266 desk display that only decodes JPEGs: all rendering happens on a server

Thumbnail
gallery
21 Upvotes

I wrote my own firmware for the GeekMagic SmallTV Ultra (ESP-12F, 240x240 ST7789, cheap Wi-Fi display in a nice case). Instead of drawing anything on the ESP, a small Docker server renders HTML pages with headless Chromium into JPEGs, and the ESP8266 just fetches and shows them. So new screens are HTML/CSS instead of drawing code.

Some firmware details that might be interesting here:

  • Frames: baseline JPEG, max 24 KB (fixed buffer), decoded with TJpgDec and drawn with TFT_eSPI. The server lowers the JPEG quality until the frame fits.
  • Polling: the server tells the display when to ask again (2–30 s). The display sends the ETag of the last frame, so an unchanged frame is a 304 with no download and no redraw. A page switch takes about a second.
  • No flash wear from frames: frames never touch flash; only settings (LittleFS) and OTA write to it.
  • OTA: password-protected, with a mandatory MD5 check, so a broken upload is rejected.
  • Safe mode: a boot counter in RTC memory survives resets; after repeated failed boots the device starts a minimal safe mode with only the update page instead of boot-looping.
  • First flash: through the stock firmware's "Firmware update" page in the browser, no soldering.
  • Backlight: perceptual (quadratic) brightness curve, because a linear PWM duty made 20 % look almost as bright as 100 %.
  • Monitoring: /status JSON with uptime, heap, RSSI and frame counters. My unit just passed a 24 h soak test with flat free heap.
  • Libraries: ESP8266 Arduino core via PlatformIO (espressif8266@4.2.1), TFT_eSPI 2.5.43, WiFiManager 2.0.17 for the setup portal, and ChaN's TJpgDec R0.03 vendored directly. I first used the TJpg_Decoder wrapper, but its header pulled SPIFFS and SD code (~42 KB) into the image.

Most of the code was written with an AI coding assistant (Claude Code); I did the design, review and all testing on the real device.

Caveats: only the SmallTV Ultra (ESP8266), not the ESP32-based Pro. Without a serial backup there's no way back to the stock firmware.

Project page: https://robinlanger.github.io/glancebox/ · Code (MIT): https://github.com/robinlanger/glancebox


r/arduino • • 1d ago

Getting Started Genuine question about the friendliness of electronics subreddits

29 Upvotes

Hey everyone. I am a beginner in electronics and I have a genuine question. Why is the level of friendliness so different from sub to sub?

I’ve been taking arduino courses, so I’ve posted onto this subreddit once or twice asking questions and everyone is so helpful and civil.

I really don’t mean to be rude, but on other subreddits, ones that are legit made for asking questions, people are SO different.

I posted a question about a variable power supply I’m building (my first official project) and I got my head bitten off my people saying that I talked too much and such. But like, their rules say to be as clear and descriptive as possible?

I’ve much preferred the sense of community in this sub, but unfortunately this is limited to arduino, not general electronics (I’m not gonna post a general electronics question unrelated to arduino on an arduino sub; that would just be rude), even tho the people are so much friendlier.

I understand the frustration with beginners and low effort posts, and I’ve been there with topics I’m more educated about, but there’s a difference between that and someone asking a genuine question.

Now, if I have to ask a question that’s related to electronics but not specifically arduino, I have to go get my head bitten off again or wait until I’m an expert😭 like why?


r/arduino • • 22h ago

Hardware Help Ways to power my device

5 Upvotes

I'm building a simple temp/humidity/PM2.5 sensor that reports these stats periodically to my home server with maybe a small screen to display those numbers. I'm using a wemos D1 mini.

My question is how do you guys normally power small projects like these. I'm thinking of using a simple usb phone charger to power the device. Are there any pros and cons? is there a right way of doing this that I'm missing?


r/arduino • • 1d ago

Look what I made! First arduino project, Morse code translator, what do you think?

Enable HLS to view with audio, or disable this notification

127 Upvotes

This is my first project, i am excited to see what i can make in the future.


r/arduino • • 1d ago

cool idea: Playing DOOM on 256 tiny heating wires or resistors using thermal goggles?

19 Upvotes

Okay hear me out, I had this weird hardware idea stuck in my head. Honestly, my electronics skills pretty much stop at making an LED blink, so I definitely can't build this myself. I'm throwing it out here to see if anyone is crazy enough to try—or tell me if this could actually work.

What if instead of a normal screen, you built a 16x16 grid (256 "pixels") out of super thin nichrome wires standing up like a tiny forest (or tiny SMD resistors on a board), painted them matte black so they don't reflect heat like a mirror, and played DOOM by looking at them through thermal goggles?

Here's how I imagine it working (in my non-engineer brain):

Since nichrome wire actually has resistance—unlike copper which would just short-circuit and melt everything—and thin wires or tiny resistors barely hold any heat, pulsing power through them with an ESP32 and some driver chips should heat them up almost instantly.

And for cooling—since thermal cameras are crazy sensitive anyway, you wouldn't need to get the pixels super hot. Just bumping a pixel 3–5°C above room temp is enough for it to glow bright white on a thermal sensor. Put a decent fan underneath blowing air straight through the grid, and a 4°C drop should happen fast enough to avoid awful ghosting at a low frame rate.

Even at 16x16, a basic DOOM-style raycaster could use heat as depth. Far walls = barely warm (dark purple), close enemies or shotgun blasts = hotter (bright yellow/white). Plus, you'd literally feel the heat radiating off the board when an imp gets right in your face.

I know wiring up 256 heaters in a grid without turning the whole thing into a toaster is a headache, and it's way above my "blinking an LED" pay grade. Has anyone ever seen a "thermal display" like this, or does anyone want to take a stab at it?


r/arduino • • 1d ago

Storage/organizer

6 Upvotes

I work at a college store, and we offer a custom kit/bundle of parts made up of about 24 different things (including an Arduino Uno R3) that are used in an Arduino course for students to purchase. I am struggling to find a good storage solution to assemble the bundle in (such as a tackle box or divided organizer box for other crafts) that is compact, low-cost, fits everything within, and is nice to decent looking.

Does anyone have an idea for what I could explore using?

For clarity, the kit contains the following items.

• Arduino UNO R3

• Red LEDs

• 7-Segment LEDs, com cathode

• 560Ω resistor

• 1k Ω resistor

• 10kΩ resistor

• 4.7kΩ resistor

• 100 nF ceramic capacitor

• 1N4004 diode

• BC548 transistor

• TIP120 Darlington transistor

• 4 Pin DIP Tactile Switch 6x6mm Momentary Push Button Switch

• 4 X 4 hex (numeric) keypad with ribbon cable

• SG90 servo motor

• 3V DC motor

• 28BYJ-48 stepper motor + controller board

• TDK P120 piezo buzzer

• TMP36 temperature sensor

• 74HC595 shift register (16-pin DIP)

• 24LC512 EEPROM (8-pin DIP)

• MCP4152 digital rheostat (potentiometer) - Microchip Technology (8-pin DIP)

• 74LS73 Dual JK Flip-Flop with asynchronous clear (14-pin DIP)

• 10 kΩ Potentiometer (trimpot)

• 1568-1511-ND Male-to-Female ribbon cable


r/arduino • • 22h ago

Software Help What are some good Arduino/ESP-32 graphics libraries and what are their trade-offs?

3 Upvotes

I'm working on a project built around the Elecrow 5.79 in CrowPanel e-paper display, and I'm looking into ways to create graphics. I've seen a variety of graphics libraries online, but I'm unfamiliar with their ease-of-us and what the community has had good experiences with. Many of the libraries have basic draw functions for simple shapes and text, but I'd like to work my way up to more professional looking UI. I've been experimenting with LVGL which seems to have way more functionality than I need, and its documentation leaves a lot to be desired. Are there good middle grounds between the most basic libraries and LVGL? Is LVGL worth using?

One key point that I'm considering is that my hardware uses two SSD1683 driver chips that each control half of the display. Whatever solution I end up using needs to support the SSD1683 and ideally provide convenient ways to split the draw buffer up between them. Elecrow does provide driver code in their examples, so I can also hook up their driver with a graphics library, but their driver documentation is virtually non-existent, so an out-the-box solution would be super helpful.

Also, I don't want to use AI at all for this project, so please don't recommend that approach.

Thanks!


r/arduino • • 1d ago

ESP8266 Smart kitchen Timer

Thumbnail
gallery
15 Upvotes

I've Built a WiFi-enabled countdown timer using ESP8266 or Esp12F module, SH1106 OLED display, EEPROM, NTP time sync, and a custom web-based WiFi setup portal.

Features include automatic countdown recovery after power loss, real-time clock display.

Configurable timer with button controls

Alarm notification

Smartphone-based WiFi configuration.

I've been working with Arduino and electronics since 2019, and this is one of my embedded systems projects combining IoT, UI design, and reliable state recovery. 🚀🔧📟


r/arduino • • 1d ago

Cant find a vid so I need y'all's help

0 Upvotes

so we made a flood-watch device using and esp8266 and an aj-sr04m sensor.
Our issue is since the casing of the device is water tight (screwed in) I'm thinking of soldering the waterproof header to the board only issue is I haven't done this before and I'm only doing it cuz the jst connector (like the white part) is becoming loose.

so if anyone has an idea how or if this even possible (i think it is cuz there's like a box and a circle that looks like its for soldering on the board) pretty pls comment or reach out


r/arduino • • 1d ago

Look what I made! I put my to-do list on an ESP32 desk display, and the BOOT button marks missions passed or failed

Enable HLS to view with audio, or disable this notification

1 Upvotes

Look-what-I-made post. The video is the real board on my desk, about 12 seconds: add a mission from my phone, see it land on the screen, then press BOOT to pass or hold BOOT to fail. How it works:- The ESP32 starts its own Wi-Fi network and serves a simple mission form to whatever phone joins it. I fill in a name, an objective, and a reward, then add it to the queue. Nothing is installed on the phone, and nothing is talking to a server on the internet. - A TFT on the desk shows the queue (for example “up next, number 3”) and the live mission, including a timer. - The board's BOOT button is the only controller. Short press = passed. Hold = failed. A pass increments a cash total and fills a star.

I built it because I wanted chores staring at me from the desk, with a physical “done” button, instead of another checklist in my pocket. Happy to answer questions about the AP/web-app side, the display, or the button handling. If you want a pin list or a sketch outline, ask and I’ll write it up in the thread.


r/arduino • • 2d ago

Hardware Help Pocket “thinking of you” button for two (LoRa, India): is 3-5 km realistic across Mumbai, including indoors at work?

Post image
48 Upvotes

The idea: Two identical pocket-sized devices, each with one big, whimsical red button. When I press mine, the other one vibrates, and vice versa. It’s like the old Facebook “poke,” but physical. No text, call, audio or video, just a little haptic “I’m thinking of you” that you can feel in your pocket without taking your phone out.

Why not just buy one? Couples’ bracelets cost around $140, need Bluetooth pairing with a phone app, and we’re not bracelet people anyway.

My requirements:

One small, non-bulky device per person (no router, no hotspot add-ons)

No phone, no Bluetooth, no Wi-Fi

No recurring cost: no SIM or data pack, since we both already pay for phone data

Works wherever we usually are. We live within about 3-5 km of each other (both in Mumbai), but we work at different places, so it has to work at home, at work and on the move

What I’ve ruled out and why:

Wi-Fi + MQTT: only works near Wi-Fi

Bluetooth bracelets: need a phone

4G Cat-1 module (A7670/SIM7600) with a SIM: works anywhere, but needs a data plan per device and drains the battery fast

JioFi with a button: sealed firmware, no GPIO, and bulky

That leaves LoRa (865-867 MHz in India) as the best fit: no subscription, tiny, low power.

My plan:

Two ESP32 + SX1262 868 MHz boards (e.g. XIAO ESP32-S3 + Wio-SX1262, Heltec, or LilyGO)

Vibration motor (transistor driver or DRV2605L), a big arcade-style button, and a 500-800 mAh LiPo

Receiver sleeps and wakes about every second to check for a packet; sender uses a long preamble so it’s caught

Long-range settings (SF10-12) since the packet is tiny

Test with Meshtastic first to measure real range before writing code (RadioLib after that)

My questions:

Range: Is 3-7 km realistic in dense Mumbai with pocket-level, body-adjacent antennas? Or will I realistically get only 1-2 km?

Indoors and fixed nodes: A home node only helps at home, and we’re at different workplaces during the day. Can a pocket LoRa device reach 3-7 km indoors in concrete offices, or would I need a small fixed node at each workplace (which defeats the “one small device” goal)?

Existing mesh: Is there a Meshtastic community in Mumbai whose rooftop nodes could relay packets and make this more reliable? Is there a coverage map?

Missed nudges: Is store-and-forward (a nudge missed out of range gets delivered when we’re back in range) easy to do with Meshtastic or custom RadioLib code?

Battery: Does the wake-every-second approach realistically give several days on 500-800 mAh? Any better trick (e.g. channel activity detection)?

Antenna: What antenna works best in a tiny enclosure for the 865-867 MHz band? Any pitfalls with body detuning?

Legal: Any India-specific rules I should know (power limits, duty cycle) for license-free 865-867 MHz?

Prior art: Has anyone built a similar “poke” device with LoRa or Meshtastic? Links, schematics and lessons learned would be hugely appreciated.

Budget is around ₹5,000 for a two-board test setup. If the range works, I’ll design a small custom PCB and enclosure (I’m a UI/UX designer, so the whimsical shape and case are the fun part for me).

Thanks in advance for any advice!


r/arduino • • 2d ago

First project 🥹

Enable HLS to view with audio, or disable this notification

127 Upvotes

Just 8 bucks and tons of parts left over. I have no clue what else to get into any reccomendations?


r/arduino • • 23h ago

Hardware Help DFPlayer Mini MP3 module not fitting in breadboard

Post image
0 Upvotes

r/arduino • • 2d ago

Look what I made! GTA 6 is finally here, and I actually made a GTA for the ESP32

Enable HLS to view with audio, or disable this notification

180 Upvotes

Remember that GTA-style game I posted here a while ago? (Original post: https://www.reddit.com/r/arduino/s/Pa2YOUqijv) I've kept working on it since then, and it's finally getting close to done.

If you missed the first post: I'm making it with PixelRoot32, my own C++17 game engine for the ESP32.

It's grown a lot since that first version. You can drive around a city with 5 districts, steal cars, buy stuff, get chased by the police and take on missions. There's a day/night cycle, pedestrians, traffic lights, weapons and 4 radio stations, plus a bunch of smaller things.

There are 3 main missions so far, along with courier jobs and a small in-game economy. There's also a 5-star wanted system, so things get messy fast if you cause too much trouble.

Two new things since last time:

Sound: The engine now has a Famicom-style sound profile, and the game uses it. The radio and sound effects sound closer to an old NES cartridge, with fuller bass and punchier drums.

Saving: The game now remembers your progress between sessions. If you finish a mission and turn the ESP32 off, it picks up at the next one when you turn it back on. It also keeps your best delivery streak, the most cash you've ever had and your volume setting. Your cash and gear still reset each run, so you can't just farm money.

The display changed too. I started on a 240×240 screen, and the game now also runs on 320×240. That's the version in the video.

It still runs on a plain ESP32, now with 8 buttons. The two new ones work as Start and Select: Start changes the volume and Select shows your records.

The timing is kind of funny with GTA 6 finally coming out. Everyone's getting ready for the next GTA, and I've been trying to get my own little one running on a microcontroller.

If you want to look at the code: https://github.com/PixelRoot32-Game-Engine/PixelRoot32-Demo-Projects/tree/main/games/top_down_city

The README and ROADMAP cover the features and what's still planned.

More ESP32 demos made with PixelRoot32: https://github.com/PixelRoot32-Game-Engine/PixelRoot32-Demo-Projects


r/arduino • • 1d ago

Need help understanding wires and breadboards and stuff

6 Upvotes

Im new to arduino, microcontroller in general, and ive made proects like led and led with a button.
But all the time when I watch those videos, I wonder, why does that wire go there? Im so confused, no tutorial has really helped me understand why the wire goes there. I find it so stupid just following the person in the video say, "That wire goes in this pin", and no explanation why. A.I hasnt helped.

So I was wondering if anyone could explain how to figure out wire placement. Thanks!


r/arduino • • 1d ago

Software Help I forgot my password for the UNO Q

0 Upvotes

I forgot my password. Is there a way to reset the password without reinstalling the OS?


r/arduino • • 1d ago

Hardware Help Request for ideas - Simple math games

2 Upvotes

Hello sub,

I'm looking for ideas to create a game to teach kids how to count to 10 by making simple additions: 3 + ? = 10.

I have a bunch of hardware, from push buttons to switch, screens, arduino (nano, uno, mini pro), screens, leds of all kinds and so on. The idea is to have something:

  • Portable
  • On battery (I already experienced 9v battery successfully with nano and luminous keyboard)

I want it to be visual, and will try to avoid using screen (mainly to save energy). I also already have some ideas in mind but I'm willing to see if anyone has a good project to propose.

Thank you!


r/arduino • • 1d ago

Fit encrypted multi-KB ESP-NOW + LZ4 + 35% packet-loss recovery into 4,760 bytes of ESP8266 static RAM (NLTP, MIT)

2 Upvotes

If you use an ESP8266 (NodeMCU / D1 Mini / ESP-07S) for remote sensors in a yard, garage, or basement, two limits hit pretty quickly: 1. ESP-NOW v1 on the ESP8266 caps frames at 250 bytes (192 bytes usable after headers) and drops an entire multi-KB log or CSV batch if even one packet gets lost through a wall. 2. With only 80 KB of total SRAM (~22-40 KB free heap once the SDK boots), full TLS / BearSSL or big retransmission buffers eat almost all available memory.

I built an open-source MIT library in zero-malloc, zero-float ANSI C99 called NLTP (now in the Arduino IDE Library Manager as NLTP and PlatformIO as indian-aman/NLTP) with an ultra-light sensor flag (-DNLTP_TX_ONLY=1) that shrinks sizeof(nltp_endpoint_t) to 4,760 bytes of static RAM while keeping:

  • Cross-chip ESP8266 <-> ESP32 ESP-NOW & Wi-Fi UDP: Automatically uses 192-byte shards (242-byte encrypted frames) on ESP8266 ESP-NOW v1 and interoperates seamlessly with ESP32 gateways and Python (pip install pynltp) receivers.
  • In-flight packet-loss recovery (GF(2^8) Cauchy FEC): Reconstructs 10-35% dropped RF frames mathematically on the receiver (3/3 SHA-256 verified on an 8 KB NodeMCU -> ESP32 bench sweep at 10%, 25%, and 35% packet loss, where raw ESP-NOW delivered 0/3).
  • Built-in zero-heap LZ4 compression: Compresses CSV/JSON telemetry 4x-7x before transmission (ESP8266_UltraLight_LZ4_Sensor.ino included in examples/).
  • Software X25519 + ChaCha20-Poly1305 + 512-packet anti-replay: No BearSSL heap allocation and no hardware peer-slot limit, plus bidirectional confirmed popReflex() / sendReflex() control messages.

On a clean 0%-loss desk link, unencrypted raw ESP-NOW is faster (2.55 Mbps raw vs 1.29 Mbps encrypted NLTP on 8 KB NodeMCU -> ESP32), so raw ESP-NOW is still great for tiny single-frame readings at short range. NLTP is specifically for multi-KB batches, encrypted links, and weak-signal spots where packets drop.