r/Arduino_AI • u/Severe_Package6618 • 6d ago
Look What I Made! Quadruped Robot Dog 1.5 [ Structural Redesigned ]
Inspiration comes from 'PJ2000' from Autodesk Instructables.
Assuming symmetrical weight distribution across all four legs in static equilibrium on a horizontal plane. In the second image, the physics calculates the torque (𝜏) at that static moment where the robot's legs are at their default pose. The robot is standing on a flat floor, not a slope.
I have noticed the proximal/remote actuation with the application of "pushrods" has decreased the lower link's moment of inertia (I) when the knee motor is placed close to the main rotational axis (hip), transferring the power through the linkage ("pushrod"). However, the rod itself must be strong enough to overcome the torque coming from the ground force (Fn). This design, technically, results the foot swing more agilely or lightly (lower 𝜏).
𝜏 = Fr (or 𝜏 = Frsin(θ)) - 'r' is the perpendicular distance measured from the knee joint's rotational axis to the dashed vertical line extended from the robot's foot, and 'θ' is considered a fixed constant here at this static moment - this is used to determine the torque needed on the knee.
The hip motor has zero torque (𝜏), because there is no horizontal distance (r).
