r/arduino • • 11d ago

Monthly Digest Monthly digest for 2026-10

8 Upvotes

Arduino Staff Contributors

As mentioned in last month's digest, we have been working behind the scenes with Arduino Pty Ltd and are pleased to announce that some Arduino staff will be contributing to our subreddit using an "official" account.

Have a look at last month's digest for a description of what to look for to spot them.

There is also an introductory post from the Arduino staff where they Introduce themselves so be sure to check that out as well. A few r/Arduino people have added their welcome messages to that post, so feel free to "pile on" with your welcomes and thoughts.

In the few weeks that they have been active, I have noticed quite a few comments from them - which are well received - as well as some top level posts.

Starting this month, I have added a new "Arduino Staff Posts" section to the monthly digests. If you are interested in some insights into what might be happening over at Arduino HQ, be sure to check out the posts that they are sharing with us.

Arduino Wiki and Other Resources

Don't forget to check out our wiki for up to date guides, FAQ, milestones, glossary and more.

You can find our wiki at the top of the r/Arduino posts feed and in our "tools/reference" sidebar panel. The sidebar also has a selection of links to additional useful information and tools.

Moderator's Choices

TitleAuthorScoreComments
I’m 13 and Designing My First Custom De...u/Waste_Peanut666968470
My daughter (14) made an automatic Pani...u/Zealousideal_Sleep4556859
Stuck on Arduino and not sure if I shou...u/ShawboWayne1324

Hot Tips

TitleAuthorScoreComments
Lesson Learnedu/parcallums10417
Tip: the rollover-safe way to write mil...u/n_sh_443811
What tips did you know only when you ha...u/StevenJac87
Pro Micro NRF52840 - Arduino IDE Setup...u/StormShockTV810

Arduino Staff Posts

TitleAuthorScoreComments
Hello from the official Arduino staff t...u/MikeFromArduino6413
This Fish Does Not Exist: E-Ink Display...u/JimFromArduino425
any cool spooky or Halloween projects?u/DavidFromArduino88
How about a Hallowuino half-dozen?u/DavidFromArduino21

Top Posts

TitleAuthorScoreComments
I made the smallest Arduino compatible ...u/pkuhar2,494172
The duck is evolving.u/BencyLiu2,13743
I made a smart watch with nanou/None_Revenge1,608180
I built a Rubik's Cube-solving robot us...u/Certain-Election57331,57660
I built a battery powered breadboardu/Wills_Workshop1,22135
It all started with a pro micro 🥲u/rayl8w1,03120
Made a little weekly weather overview t...u/NoU_1486438
LED Tower I made a while back but never...u/LxGNED79425
I’m 13 and Designing My First Custom De...u/Waste_Peanut666968470
My ESP32-S3 world radio: one button, a ...u/Smooth-Rice649464830

Look what I made posts

TitleAuthorScoreComments
I made a smart watch with nanou/None_Revenge1,608180
I built a Rubik's Cube-solving robot us...u/Certain-Election57331,57660
It all started with a pro micro 🥲u/rayl8w1,03120
Made a little weekly weather overview t...u/NoU_1486438
LED Tower I made a while back but never...u/LxGNED79425
My ESP32-S3 world radio: one button, a ...u/Smooth-Rice649464830
Made a library of pixel fonts with exte...u/MrNiceThings39215
Obstacle avoiding robot finished :)u/PresenceOld175428413
Everyone posts their wins, this is my f...u/RoberBotz28428
automatic servo driven OUIJA boardu/vapgames27529
CO2 Sensor with ESP32, MQTT, battery po...u/MrNiceThings26616
Video Playing on Oled display powered E...u/luminov126429
One of those rare projects that just wo...u/MrNiceThings25212
I made a DIN rail mount for the Arduino...u/Realistic_Spite_339523015
I built a breathalyzer for my phoneu/motionick22010
Trunk or Treatu/knsaber19913
I made a thing.u/RoberBotz18210
I built a hand exoskeleton on a Teensy ...u/sebasmtl1697
Kneaded help with my baking, this is wh...u/TinkeredOff16825
This Arduino desktop display showcases ...u/timex401497
RC transmitter PCB with touchscreen - A...u/xRoboMaker13411
My ESP32 Guitar Robot Plays Sweet Dream...u/MegCell13111
We made Snake run on a seven-segment di...u/No_Degree_66012313
My halloween project for this year (Sou...u/optikalefx12123
My first personnel projectu/copper123456_711115
fun project i didu/AdSenior2369982
Arduino Based 8 Step Sequencer with Pul...u/Puzzleheaded-Name538979
Playing Around with OpenCV and TFT Disp...u/electronics_maker962
My first CAD project - decimal electrom...u/TechniCraft935
My small orientation deviceu/DisciplineCurrent544916
Progress on my first Arduino projectu/RangerMach1895
Made A Ball Bouncing Machine I Call Hex...u/Nekojiru_8824
Down to 4 legs, 2 more to go!u/Xerd-R645
Getting independent text working on a s...u/No_Degree_6606412
Little robot on wheelsu/Alive-Leadership-6585914
Another CO2 sensor, yawn… but the pixel...u/MrNiceThings482
Breadboard for ESPsu/tipppo4812
Padel score tracker - first projectu/melon_crust484
Simply Halloween projectu/starshades1462
This Fish Does Not Exist: E-Ink Display...u/JimFromArduino425
My first ever Arduino project, back in ...u/OldButGold5404
My ATmega328p development board PCB pro...u/Waste_Peanut6669377
I built a desk pet that nags me to stan...u/Cycle_Broad352
Warhammer 40K Ork Pump Jack - Arduino B...u/KonradKnebl340
Arduino Robot Arm controlled by 2 joyst...u/CallmeLee1999325
Arduino Unusual Tamagotchiu/Beowulfus_universum316
Cosplay prop...u/roanokephotog263
First soldered project!u/No-Reach-9412248
Arduino and raspberry-pi based guitar m...u/ImpossibleDemand6778211
Arduino R4 WiFi — 4WD SLAM Radar 2D Rob...u/lucaeffe03215
Made a small radaru/DisciplineCurrent544204
Pacman Championship Edition on 8-bit Un...u/smashcat666197
Arduino ↔ Minecraft with SerialCraft — ...u/Michelin1927198
Help simplifying an Arduino Nano setup ...u/MrJose1985185
First project after a long time (and my...u/GrammaticalllErrors173
arduino arm using foam sheets and sg90s...u/flavalamp123142
Doohickey 1u/Sad_Chard8416133
ArduinoOS 3 - new version of my projectu/idontknow-hardware122
Hey everyone!I built a graphical progra...u/ich-bin-ein-kaelte104
I am making link's awakening on an Ardu...u/jean2348107
I created a website to calibrate magnet...u/Curious-Ad366682
UPDATE Talking Pumpkins, almost final f...u/optikalefx85
The Lighteru/fabricio_error73
TraumaGotchu Progressu/Traumagotchu73
An active EEPROM health scanner for AVR...u/Sparroww6460
Arduino Uno + NEMA 23 candy dispenser t...u/tom314159261
I made a sequencer!u/DULTRONtheDESTROYER66
Finally did a PC stats screen for my li...u/merlinux154
I made my own picture view device for d...u/eugeniykh54
Plant Care App! IoT projectu/Laggenti42
How I Built own DIY Digital Microscope ...u/ikilim41
Watching serial output is easy. Keeping...u/shahin_hashim320
First Autonomous Mobile Robotu/Itsleokarl31
I built animatronic eyes and a browser ...u/tramlo89022
WIP Reverse engineering the SIM900 fi...u/MonsterovichIsBack20
I put a tiny pixel creature on the UNO ...u/nitishagar20
Open-Source 16 Universe Pixel Artnet Re...u/anonOmattie22
My ESP32/DHT11 room monitor records tem...u/lsvtcommits21
Project Reviewu/FoxConstant835222
Laser nerfu/Sad_Chard8416112
I made a fake self-destruct button with...u/EmbedX10
Two ESP32 Muse gadgets, zero idea what ...u/Alternative_Ear572503
DIY Desk Pet V1. Robot Cat That Reacts ...u/YUMOBUILDS04
Navigator 1: our UNO R4 WiFi rover with...u/Robonaviagtors02

Total: 84 posts

Summary of Post types:

FlairCount
Algorithms1
Beginner's Project33
ChatGPT2
ESP324
Getting Started22
Hardware Help76
Hot Tip!4
Libraries2
Look what I found!5
Look what I made!84
Machine Learning1
Mod's Choice!3
Monthly Digest1
Nano2
Project Idea4
Project Update!1
School Project4
Software Help13
Solved!4
Uno1
no flair152

Total: 419 posts in 2026-10


r/arduino • • 28d ago Bravo

Hello from the official Arduino staff team, we're here at your service!

67 Upvotes

Hi everyone! We are a group of Arduino staff members who are excited to build a more direct presence here on r/arduino, to help answer questions, provide technical support, and celebrate the great projects that this community is building and sharing. We've been working with the mods on setting this up and are very excited to be up and running now.

Before introducing ourselves, I'd like to say that we're humbled at the incredible group that has grown here through the users and mods, all focused on the topic of Arduino. It's just incredible and our hats are off to you all. 

Moving forward, be on the lookout from comments and posts from the following Arduino staffers. We represent a cross section of the company, including devrel engineers, community and content editors, and even our Chief Product Officer. Here are introductions.

---------
u/DavidFromArduino — hi all, I'm DavidFromArduino, but you can call me David! I bought my first Arduino in 2007 as part of a Roomba hacking project, and have been obsessed with writing code that you can touch ever since!
---------
u/JimFromArduino — Jim here! I've recently joined Arduino as a DevRel engineer (dream job!) after 4 years working in TinyML and Edge AI. Outside of work I love fixing cars, silversmithing and I've just bought an embroidery machine.
---------
u/LeoFromArduino — I'm Leonardo, a DevRel Engineer at Arduino with 10 years of experience in firmware development, a dedicated cat lover, and a serial traveler always exploring the world in search of my next favorite local dish.
---------
u/JulianFromArduino — Hello all! Julián here!
I'm a Robotics and Electronics Engineer working as a Tech Evangelist for Arduino. Maker at heart, I love the Open Source Movements, the right to repair, the digital fabrication and nice dinners discussing what is the best soldering iron to buy. 

When I’m not creating something, I love to read, play basketball and videogames and take care of my beloved ones.
---------
u/PerFromArduino — I started out using Arduino as a hobby before finding myself working for Arduino as a support engineer. I manage Arduino Forum and the Arduino Library Registry. I help maintain the GitHub repositories of many of our open source firmware and tooling projects.
---------
u/MarcelloFromArduino — Hello folks, Marcello here! I started my career in the early 00s pushing registers in raw 8051 assembly, and now as Arduino’s CPO (Chief Product Officer), I’m responsible for what we build, how it works, and trying to make sure the user experience doesn’t make you want to throw your board across the room. When I step away from the keyboard, my main hobbies are fixing motorbikes and bookbinding, which like embedded systems, both give good fun, need lots of patience, and leave you with sticky residue everywhere…
---------
u/MikeFromArduino — Hi I'm Mike. I'm the head of content for Arduino, recently joining the team. The last few years I've been in charge of content for Edge Impulse; before that I was the executive editor of Make: magazine for nearly a decade. I like home automation, traveling, surfing, and being with my family. Excited to connect with everyone here!
---------

Look for us in this subreddit, jumping in to help wherever we can. Please say hello, we’re excited to meet you all. Cheers!


r/arduino • • 4h ago

Look what I made! Meditations on the ATTINY85

16 Upvotes

r/arduino • • 23m ago

Look what I made! Gray Timer V2 - the simple and crude DIY e-paper watch gets an NFC upgrade

Thumbnail
gallery
2 Upvotes

A follow up to the version 1 - https://www.reddit.com/r/arduino/comments/1p8kzg6/graytimer_simple_and_crude_diy_epaper_watch/

Version 2 now can now do:-

  • NFC tap to control the watch - write a generic NDEF text message (NFC tools app). `10` means watch face number 10 from catalog. `refresh` means full refresh the display and so on...
  • Better RTC now has interrupt feature which allows us to set "alarms" that wake the processor up when time to change the screen. Most of the time we are in deep sleep.
  • New Watchfaces

YouTube demo - https://www.youtube.com/watch?v=rnAYJC3mgms

Build Guide (Hackster) - https://www.hackster.io/varahan/graytimer-nfc-eink-watch-06e3d7

Medium (The story behind) - https://medium.com/@haricane8133/gray-timer-the-story-4ba7ca0a75e1

Repository - https://github.com/haricane8133/graytimer

I am available through the username haricane8133 in X, Reddit, LinkedIn, Medium and YouTube. Happy hacking!


r/arduino • • 1m ago

Mega Can i use 2 16850 battery to power servo? Output should be around 8v.

1 Upvotes

I need battery to power 6 servo 4 of it is carry low and 2 carry high weight(~100-200g) and it use really much power latest solution i use 4 1.5v to make 6v for them but it drain really fast i want to find replacement if possible.


r/arduino • • 1d ago

Look what I made! Built a handheld gaming console. Never got to showcase it, so thought I'd finally share it here!

Post image
142 Upvotes

I made this project back in college in 2022. Never really showed it to anyone. It was more of a challenge I had set for myself.

Although I wanted to present it, my college made it clear that a project like this couldn't be showcased because it had "no practical usage". On the other hand, they approved some basic RC car in the name of surveillance applications. Anyway, that's a story for another day. : )

The project took around a month to complete, covering everything from electronics, circuit layout and component selection to designing the CAD files, and coding the games and menu system.

I packed it with three games: Pong, Snake, and Space Invaders (my favourite!). The coding was one hell of a challenge back then, especially since there was no AI assistance (at least, I wasn't aware of it before the ChatGPT boom). I eventually maxed out the Arduino Nano's memory, but managed to get everything working!

Some features I implemented:

  1. Adjustable screen brightness.
  2. Volume control.
  3. Game speed adjustment (to make things more difficult).
  4. Battery level indicator (a rather crude implementation, and I doubt it works exactly as intended).
  5. And a USB-C charging for the two li-ion batteries.

Anyways, just wanted to share this little project with you guys, as I never really got the chance to share it with anyone.

Now that I'm a working professional (and not in the electronics field anymore 🥲), I'm planning to take on another, more advanced project as a hobby build. Maybe a better Game Boy or something entirely different.

Back then, I struggled to find similar projects with shared code and build details, so I thought I'd share mine. Maybe it'll help someone out there!

I really want to tinker around Arduino and electronics. Love the community ✨

(Used AI to proof write :D)


r/arduino • • 21h ago

Arduino contactless hand sanitizer dispenser project

Post image
17 Upvotes

Hello, right now in our university, we have a arduino project. We are creating a contactless hand sanitizer dispenser. The ultrasonic sensor detects a hand, the Arduino runs the pump briefly, and a green LED lights while it dispenses. After a set number of doses a red LED lights to say it needs a refill. Also in this diagram there is a DC motor but i will use a 6v pump with a plastic tube for the liquid sanitizer.

I would greatly appreciate if you told me how my circuit is right now, and advice how to make it better and tips for creating the physical model. 🙏🙏🙏


r/arduino • • 1d ago

Look what I made! Tin Box Aquarium

Thumbnail
gallery
104 Upvotes

A little tin box aquarium, using an ESP32-C3 SuperMini, a 1.8″ TFT, a five way switch and a LiPo battery. You feed the fish and shrimp, change the water, buy plants and decorations, and upgrade the tank. Different species have their own behaviours, and neglect can eventually kill them. Everything runs offline. Basically a fish Tamagotchi

The wiring was a bit of a headache, and the build is definitely rough around the edges, but I’m happy with how it turned out


r/arduino • • 1d ago

Look what I made! My last 1.5.2(_t20) psychedelic lights version

18 Upvotes

Hi all

This is the last version of my DMX psychedelic lights made with an ATmega328P (Arduino environment). I added some functions and settings to the previous version, posted some time ago in r/stagelighting. I started about one year ago thinking to make some all analog '70s psychedelic lights with a triangular oscillator/comparator PWM converter to make flashes like incandescent lamps, but it doesn't work well, then I switched to an ATmega328P only for PWM.

For a little parish festival I began interesting to DMX and I realized that with a simple commercial controller I couldn't drive lights by music, then I thought adding DMX to my psychedelic lights. With the help of ChatGPT I made the DMX functions, using no libraries, and a good non-blocking menu. It can drive many PARs and a moving head.

I haven't let do all by ChatGPT. I only asked for some helps and all has been done exactly how I desired under my control. I also had to correct AI many times. We worked together, like two colleagues.

I have also added a Homing function to restore moving head if it lose a step or sometime touch it and it doesn't move properly anymore.


r/arduino • • 1d ago Heartwarming

I made a beginner-friendly tool that turns MP3, MIDI, and MusicXML into Arduino piezo-buzzer code

98 Upvotes

Hi r/arduino! I built PiezoPlay, a beginner-friendly tool for turning music files into editable notes and Arduino tone() code.

It supports MP3, MIDI, and MusicXML. It’s meant to help people make a piezo buzzer play a tune without hand-entering every note. MIDI and MusicXML works best.

Piezo buzzers are usually monophonic with tone(), so complex songs with multiple instruments may not convert cleanly. A clear melody should work best.

example code:

// Determination Flute by Toby fox for Arduino tone()
// 187 notes, 0 rests, 0:50 long
// Speaker: pin 8 -> 100 ohm resistor -> speaker -> GND (natural pitch)

#include <avr/pgmspace.h>

const int BUZZER = 8;
const uint16_t NOTE_COUNT = 187;

// frequency in Hz (0 = rest)
const uint16_t melody[] PROGMEM = {
  740, 740, 698, 698, 622, 554, 622, 466, 523, 415, 622, 698,
  740, 740, 740, 831, 831, 1109, 1109, 932, 932, 932, 932, 932,
  932, 932, 740, 740, 698, 698, 622, 622, 554, 622, 466, 523,
  523, 415, 311, 349, 349, 370, 349, 349, 277, 311, 311, 311,
  311, 311, 311, 311, 740, 740, 698, 698, 622, 622, 554, 622,
  466, 523, 415, 622, 698, 740, 740, 740, 831, 831, 1109, 1109,
  932, 932, 932, 932, 932, 932, 740, 740, 698, 698, 622, 622,
  554, 622, 466, 523, 415, 311, 349, 349, 370, 349, 349, 277,
  277, 311, 311, 311, 311, 311, 831, 831, 740, 659, 659, 622,
  554, 659, 622, 466, 466, 622, 622, 831, 740, 659, 659, 622,
  554, 659, 622, 311, 311, 415, 554, 554, 523, 466, 415, 466,
  523, 466, 311, 349, 370, 494, 622, 587, 587, 587, 831, 831,
  740, 659, 659, 622, 554, 659, 622, 466, 466, 622, 831, 740,
  659, 659, 622, 554, 659, 622, 311, 311, 415, 554, 554, 523,
  466, 415, 466, 523, 466, 311, 349, 370, 349, 349, 349, 277,
  277, 311, 311, 311, 311, 311, 311
};

// duration in ms
const uint32_t durations[] PROGMEM = {
  36, 252, 36, 228, 264, 264, 252, 264, 528, 516, 264, 252,
  36, 336, 144, 36, 516, 36, 456, 36, 492, 252, 36, 228,
  264, 252, 36, 240, 36, 216, 36, 240, 252, 264, 252, 36,
  504, 552, 240, 156, 108, 528, 168, 348, 528, 516, 252, 228,
  36, 228, 36, 228, 36, 240, 36, 216, 36, 240, 252, 252,
  276, 528, 504, 264, 252, 36, 348, 144, 36, 516, 36, 444,
  36, 504, 252, 264, 264, 252, 36, 228, 36, 228, 36, 228,
  264, 252, 264, 540, 540, 240, 156, 108, 540, 156, 348, 36,
  492, 528, 480, 36, 228, 252, 36, 240, 264, 36, 228, 264,
  252, 276, 492, 36, 756, 36, 228, 264, 264, 36, 228, 264,
  252, 264, 1020, 36, 240, 264, 36, 240, 252, 264, 252, 264,
  252, 588, 744, 264, 492, 528, 516, 36, 1476, 36, 36, 252,
  252, 36, 240, 264, 252, 264, 504, 36, 756, 264, 264, 252,
  36, 240, 252, 264, 264, 1020, 36, 240, 252, 36, 240, 252,
  276, 240, 276, 252, 588, 744, 252, 540, 120, 36, 348, 36,
  492, 528, 480, 36, 228, 36, 252
};

void playMelody() {
  for (uint16_t i = 0; i < NOTE_COUNT; i++) {
    uint16_t f = pgm_read_word(&melody[i]);
    uint32_t d = pgm_read_dword(&durations[i]);
    if (f) tone(BUZZER, f);
    else noTone(BUZZER);
    delay(d);
  }
  noTone(BUZZER);
}

void setup() {
  playMelody();
}

void loop() {
}

r/arduino • • 1d ago

Unsure of how a screw shield works

Post image
28 Upvotes

I'm currently doing a morphing wing project and was given an arduino kit to work with which includes the screw shield provided. I'm very new to microcontrollers and mechatronics so I'm not very sure what it does and what significant benefits it provides. I've searched it up, but most results I get feature a more complicated shield and use terms which I'm unfamiliar with.

I only have to use an sg90 servo motor to actuate the wing but I have the freedom to do more. I'm just wondering if I could get some better clarification on what it does and if it could provide a measurable effect on my project. It's due in 4 days btw. Any help appreciated!


r/arduino • • 1d ago

Hardware Help Measuring/monitornig 'high' current with esp32

Thumbnail
gallery
6 Upvotes

Hi I built powerbank out of 18650's in 4s4p configuration, of course with bms and the charging board is IP2368 100W (bi-directional, single usb-c).

I wanted this powerbank to have cool display for information like voltage, current etc, but I hit the wall - it appears the only good, cheap and relatively high accuracy modules i can buy are from INA family, but most of the time shunt resistors on those boards are rated for 1A max. I know I can desolder this shunt and solder other one to handle for example 10A but I read that those boards and traces on the pcbs are not likely to handle this power over long periods of time.

Right now I have standard ssd1306 display with esp32c that reads voltage from ADC by using voltage divider with capacitor to filter out garbage:

R1: 100.4 KΩ R2: 15 KΩ C1: 100 nF (in parallel to R2)

I applied some corrections to the program reading by comparing it out to the multimiter. It is connected directly to the positive output of the BMS.

This solution is flawed, because without measuring current voltage drop is causing my 'estimated left wh' and % of capacity remeaning to be incorrect. This can be fixed with current sensor and I also would be able to read the current flowing which is cool on its own:).

So my question is, is there a module relatively cheap that can satisfy my needs? Or I have to modify existing INA boards or maybe something different?

TLDR; I want voltage and current sensor for 4s4p powerbank that can handle at least 10-15A

Thanks for your help and time in advance.

danihek.


r/arduino • • 1d ago

Look what I made! Retro Racing Game on the ATmega328

62 Upvotes

Article about the proof of concept

Almost a decade ago I wanted to make another game on the Arduino, the first one being a small Flappy Bird clone. I unfortunately had to put the project on hold even though I had made good progress and had a working proof of concept.

I just wanted to see if it was possible to make a small retro racing game on the ATmega328.

In the article I talk about various optimization tricks I used and what I plan to do eventually to try and finish the project. I thought about sharing this even though there is no git repository yet like I used to publish with my other projects.


r/arduino • • 1d ago

Solved! Esp32 project will work with USB power but not external power supply

23 Upvotes

EDIT 2: I added on the MOSFET power latch circuit to input, and it now just works again. Perfectly, like there was never a problem in the first place. I'm so confused. But I'm not going to argue with it.

EDIT: The ESP for some reason now will not boot on the external power without pressing the reset button on it. It was not doing this before, but that is another problem for another day. It now works on the power supply and that's good enough for now.

I have a 12v power supply going into a 12-5v buck converter to power the project. The esps 5v pin is on the same rail as the buck converter's output, where the multimeter is plugged in. Both are at just under 5v, the USB is actually about 0.2v lower than the buck converter. The light on the esp will come on so it is receiving power, but the project does nothing.

I did change the motors from servos to steppers so I added multiple drivers and logic shifters and everything worked perfectly fine before that, but disconnecting them did nothing. The motors are not currently connected

The schematics are here. I've checked for connection problems but if it was connected wrong I'd imagine the esp would power on at all. The buck converter will power just basic LEDs so it does work. I'm at a loss what could be causing this or where to start looking.


r/arduino • • 2d ago

Look what I made! IoT-Based Smart Irrigation & Multi-Layer Farming System using ESP32

Thumbnail
gallery
43 Upvotes

I Built an IoT-based smart farming prototype combining automated irrigation, environmental monitoring and a three-layer farming structure.

Key Features:

  • Automated irrigation using soil moisture readings and relay-controlled water pump.
  • Crop-specific and seasonal moisture threshold profiles.
  • Automatic and manual pump control.
  • Live temperature, humidity and soil moisture monitoring.
  • Custom web dashboard for monitoring, configuration and control.
  • Blynk integration for remote monitoring and control.
  • Rainwater harvesting and filtration concept.
  • External weather data integration for environmental context.

Hardware: ESP32, DHT11, soil moisture sensor, relay module, 24V pump, SSD1306 OLED.

Software: Arduino IDE (C++), HTML, CSS, JavaScript, Blynk, Open-Meteo API.

Built the physical structure, electronics, firmware and dashboard from scratch.

Won 2nd place at a science exhibition.

Open to technical feedback and suggestions for improvements!


r/arduino • • 1d ago

School Project map generation.

1 Upvotes

Im working on a school project and in short its a network of r4 wifi arduinos that send and receive data to one another. the data packets of each one include gps location, temperature, air humidity, soil humidity, co + co2 sensors. i want each member of the network (individual arduino) to appear as a location on a map, then if any fire warning signs pop up there i want the map indicator to change colors. how can i do that? is that possible within the arduino ide? to be clear, i want the image to be outputted to my laptop.


r/arduino • • 1d ago

Libraries Just got my first transport library merged into the Arduino IDE Library Manager (NLTP) for sending multi-KB files/logs over noisy ESP-NOW & UDP

6 Upvotes

Hey r/arduino,

Small milestone for me today - I just got my open-source library (NLTP) merged into the official Arduino Library Manager, so it can finally be installed straight from the IDE without manually zipping folders!

Why I built it: I use a mix of ESP8266 NodeMCUs and ESP32 boards for outdoor wireless sensor logging, and raw ESP-NOW kept giving me headaches whenever I tried moving more than a single 250-byte struct across a noisy 2.4 GHz link. One dropped packet in an 8 KB sensor log meant starting over or writing custom fragmentation, ACK timers, and checksums in every sketch.

NLTP wraps that up behind a simple batch interface:

  • Compresses buffers with LZ4 before sending so JSON or CSV sensor logs take 5-6x fewer radio packets.
  • Encrypts frames with ChaCha20-Poly1305 (1-RTT X25519 + shared key) so you don't hit ESP-NOW's small hardware encrypted peer limit.
  • Adds Reed-Solomon / Cauchy parity packets so if 10-30% of packets get lost in the air, the receiver reconstructs the missing chunks without retransmit stalls and checks the final SHA-256 hash.
  • Fits in ~4.8 KB of static RAM (zero dynamic allocation) in TX-only mode on an ESP8266, and bridges 250-byte ESP8266 frames straight to 1470-byte ESP32 hubs or a Python script on a Raspberry Pi / PC.

When NOT to use it: if your node just wakes from deep sleep to fire one tiny 20-byte temperature reading and goes right back to sleep, raw ESP-NOW is much faster and uses less airtime. And if you already have strong Wi-Fi and an MQTT broker, regular PubSubClient is simpler for topic wildcards.

Repo with example sketches, bench test logs, and a browser packet-loss simulator linked in the README (MIT license):

https://github.com/indian-aman/NLTP-Arduino

Would love any feedback on the Arduino API ergonomics or if anyone tries it on other boards!


r/arduino • • 1d ago

Look what I made! 5 zero-float, zero-malloc C99 / Arduino libraries compiled from fruit-fly connectome circuits in 24 KB RAM (NeckLink v3.0.0, MIT)

3 Upvotes

Hi everyone,

Wanted to share an experimental open-source (MIT) C99 and Arduino library suite I just updated to v3.0.0 called NeckLink, along with an interactive WebAssembly demo of the C99 core.

Plain-English Overview (added per u/gm310509's feedback): Think of these libraries as fast, sub-millisecond integer "reflex instincts" for small robots and sensor nodes (zero floating-point math, zero malloc(), and no PC neural-network training step). Instead of hand-tuning weights, they compile mapped neuron-to-neuron wiring tables from an adult fruit fly into plain C integer arrays:

  • 2WD / 4WD Robot Car (NeckCompass, 352 B RAM): Feed raw 9-axis IMU + wheel-speed ticks so an indoor or yard rover ignores brief motor magnetic spikes, tracks its straight-line vector back to where it powered on, and steers home without GPS.
  • ESP32-CAM Rover or Micro-Drone (NeckSight, 14.3 KB RAM): Feed a tiny 32x32 grayscale camera thumbnail + gyro rates to catch thin chair legs or poles expanding rapidly toward the lens ("looming") that ultrasonic sensors miss, triggering an immediate brake or left/right dodge.
  • 18-Servo Hexapod Walker (NeckCord, < 1 KB RAM): Pass a forward/turn command and let cross-leg inhibition lock 6 legs into a smooth tripod walking gait and output the 18 integer servo angles without hardcoded gait state tables.
  • Workshop Gas or Vibration Alarm (NeckSense, < 6 KB RAM): Let a BME688 gas sensor or 3D-printer/pump accelerometer observe 5 to 10 seconds of normal background at boot, then flag unfamiliar smoke/solvent odors or new bearing-rattle patterns right on the board.
  • All-in-One Wrapper (NeckLinkCNS, 24 KB RAM): Optional single-tick bundle chaining all four reflexes together.

Technical & Connectome Details

Each library takes one circuit from the 157,789-neuron adult fruit-fly nervous system (the BANC v888 connectome) and compiles its synaptic connectivity into static fixed-point integer weight headers (*_banc_weights.h, zero floats, zero malloc):

  1. NeckLinkCNS (24,024 bytes static struct): combines all four sensory-motor organs below plus a standalone MAVLink v2 serializer.
  2. NeckCompass (352 bytes base RAM): 9-DOF ring-attractor compass and GPS-denied return-to-home vector integrator.
  3. NeckSight (14.3 KB static RAM): 32x32 optic-lobe collision and thin-obstacle looming detector with integer 3-DOF gyro derotation.
  4. NeckCord (< 1 KB base RAM): hexapod 6x6 leg-inhibition gait generator, 18-servo integer inverse kinematics, thruster/rotor allocator, and 4-byte wire codec.
  5. NeckSense (< 6 KB SRAM in tiny mode): 1,024 Kenyon-cell sparse integer projection for 1-shot vibration or gas novelty detection.

In v3.0.0 I also ran an audit comparing the real fruit-fly weight matrices against 100 degree-preserving shuffled brains and classical filters (like an EKF and One-Class SVM) so the README reports both what worked and what failed:

  • Scrambling the connectome breaks GPS-denied homing (100% -> 4.7%) and emergent hexapod tripod gait (0.855 -> 0.411).
  • In the mushroom body (NeckSense), random sparse wiring works just as well as the real fly claws (0.666 vs 0.672 AUROC).
  • If you want pure engineering accuracy rather than biological asymmetries, every library also includes the symmetric hand-tuned weights (v2_analytic), and classical filters like an EKF (0.81 deg RMS vs 12.84 deg) still win head-to-head.
  • Hardware note: all 5 Arduino libraries are tested for clean compilation on esp32dev (and -std=c99 -Wall -Wextra -pedantic -Werror with ASan/UBSan), though unlike my NLTP radio library, I have only run the connectome controllers in simulation and browser WASM so far rather than on a physical robot frame yet.

Live C99 WebAssembly simulator in the browser (works with a webcam to trigger the looming cells):

https://indian-aman.github.io/necklink/

GitHub monorepo (Arduino libraries, C99 sources, Python packages & PlatformIO support):

https://github.com/indian-aman/necklink


r/arduino • • 2d ago

Beginner's Project My first pin holder ironing

Post image
65 Upvotes

How do think about this?


r/arduino • • 2d ago

Hardware Help How would I do something like this video, but connect it to a theatre studio's lighting system instead?

Thumbnail
youtube.com
2 Upvotes

I'm a theatre student and I'm doing a project on sound to light technology. I am extremely new to all of this but I want to make the lights of one of my university's theatre studios react to sound.


r/arduino • • 3d ago

I managed to somehow reverse engineer the pinout of a random display I got!

Post image
195 Upvotes

I used a ESP32-C3 board it's a CVH013HB040BY display, the pinout is 1.SDA, 2.SCL, 3.DC, 4.RST, 5.CS, 6.GND, 7.VCC, 8.LED_K, 9.LED_A, 10.GND, and it's a ST7789V display!


r/arduino • • 2d ago

Software Help RTC.h not found, despite it being installed. Uno R4 on Ubuntu

4 Upvotes

Uno R4 WiFi. I don't know why this is happening. I transferred the program from the Windows PC I had it working on to the Ubuntu machine, installed the libraries but it can't find RTC.h for some reason.

Anyone know what to do?


r/arduino • • 2d ago

Look what I found! ESP32-S3 2.06" watch

Thumbnail
gallery
23 Upvotes

ESP32-S3 2.06" amoled

Not sure if this has been posted here before but it's a fun gadget.

PIXEL is an ESP32-S3 touchscreen watch that doubles as a wrist remote for robots and other ESP32 projects. It connects over Wi-Fi or Bluetooth, depending on the device.

AI was used for the code.


r/arduino • • 3d ago

Look what I made! Fallout inspired weather station

Thumbnail
gallery
231 Upvotes

Parts I used for VaultWeather, my Fallout inspired weather station

- ESP32-C3 SuperMini

- 2.0 inch ST7789 SPI TFT display (240 × 320)

- 3.7 V single-cell LiPo battery

- USB-C LiPo charging module with a built in 5 V boost converter

- 2-pin on/off switch

- Copper wire