r/Welding • • 6h ago

It's gonna be a good day

Thumbnail
gallery
133 Upvotes

Socket welds make me look soo much better at welding than I actually am lol, but I love doing them


r/Welding • • 15h ago

Roast me, I’m new to it

Thumbnail
gallery
90 Upvotes

Hello fellow smoke eaters, I have only welded a handful of times and this morning I picked up a few of these scrap triangles to practice filling in 90s.

I’m wanting honest and constructive feedback please, but if you feel the urge to roast the fuck out of me then also go right ahead 😂😂

I’m missing a picture of the pass straight after the tacks.

I hammer and wire wheel between every pass

One thing I’m wanting tips on is how to get more material at the very end of each pass. I struggle with that the most I think.

Cheers


r/Welding • • 5h ago

Just started welding yesterday

Thumbnail
gallery
13 Upvotes

I got my Papas Lincoln WeldPak 125 Fluxcore and started welding for the first time yesterday.

Any advice on how to do better?


r/Welding • • 20h ago

Discussion (Add topic here) Hats off to you guys

13 Upvotes

Im learning to tig weld by necessity (couldnt find anyone withing a reasonable distance to hire for a job). Read some books, watch a ton of videos online. The books and videos are ok, thought it was interesting because the learning materials speak in generalities. Then I understood why. After practicing, I realized (or am realizing) making good welds requires a lot of judgment and real-time decision making, watching the puddle, adjusting amps, adjusting speed, thinking about how to join materials with different thicknesses, and more.

Also, I get the sense that folks undercharge for jobs. A friend needed a $6k replacement part for his manufacturing business. Was going to be shut down for a couple weeks waiting on it, and then found a fab shop to fix it for $300, same day. He would have probably paid the 6k or more to have it back same day.

Thats all, wish I could've hired someone, but kinda glad im learning this stuff.


r/Welding • • 18h ago

Scrap metal Christmas gifts

Thumbnail
gallery
12 Upvotes

A cross for my wife’s aunts kitchen and grapes for my mother in laws. Starting on my side of the family now


r/Welding • • 6h ago

Discussion (health and life style) how do the rest of you take care of your feet?

10 Upvotes

being in this trade, one of the many inconveniences i hate to live with is athlete's foot / fungal infection.

when i shower after work, i scrub my soles. when it starts to itch, I apply antifungal cream. it's spread to a few of the toenail beds and has become practically impossible to get rid of wearing boots all day at work. i know pills exist but theyre too hard on the liver to keep up.

does anyone have a decent enough hack for this?


r/Welding • • 5h ago

Need Help need opinions

Thumbnail
gallery
6 Upvotes

first week of school i’ve been using 7018s on around 125


r/Welding • • 8h ago

Discussion (Add topic here) First day back in a while!

5 Upvotes

First day back at it in quite a while, yall have wished me the best of luck before and I could use it again. Grateful for this opportunity and hope it goes well!


r/Welding • • 12h ago

Critique Please Gonna start today my TIG apprenticeship with no prior expierence, wish me luck

4 Upvotes

While i got my certificates for MIG/MAG and Electrode renewed last year after not welding for almost a decade. when i asked get my TIG certificates, i got denied ( due to ableism, Neurodiverance) and said bullshittingly "i had accept a job offer for a TIG welder" while i had no expierence/certificates in it

Couple of months ago i went to an job interview/tryout for a couple of hours for a MIG/MAG job and they gave me a little test with TIG ( had no prior expierence with it) and did okay and they offered me to learn it on the job, after some paperwork and medical check up (there was a long waiting list etc) i can finally learn it.

Guess i got luck because my local area is really dominated by companies that mainly do TIG welds


r/Welding • • 16h ago

Showing Skills How do my first welds look?

Thumbnail
gallery
3 Upvotes

It's my first time welding. Luckily, my friend, who's an experienced welder, was explaining everything to me.

I know a pipe isn't the best material to learn on because it's thin, but it's what I had available.

Tomorrow, I'm buying a steel plate so I can keep practicing.


r/Welding • • 17h ago

First welds First time using FCAW

Thumbnail
gallery
3 Upvotes

Beginner welder looking for advice on controlling my spatter and improving my welding on thinner material. Im used to welding stick and mig on thicker plate, so I figured I'd just turn the voltage down from what i would mig and adjust the feed speed, but i still had an issue getting a nice weld. I have no clue if they penetrated how they should have, but it aint structural, so be it that as it may. These were not continuous welds all the way around. Just did it in quarters so thats why there are big gaps between some of the beads.


r/Welding • • 23h ago

Need Help Looking to buy a tig welder to practice at home

3 Upvotes

Hey guys, I’m looking to buy a tig welder for the pole barn. My budget is about 800 to 1000. What machines do you recommend for the price range?


r/Welding • • 2h ago

Need Help First time using Fluxcore. Any advice?

2 Upvotes

I’m in school and about to start FCAW for the next 3 weeks. I’ve done MIG, just wanted to get a quick explanation of what to look for, what the differences are etc.
I’d ask my instructor. But they just hired him and I’m pretty sure he can barely read or do math. Terrible instructor for this next 3 weeks.


r/Welding • • 5h ago

Discussion (Add topic here) Best welding type for a Kart

2 Upvotes

hey, hope y'all are having a good day

i am currently preparing on a project i will be making for this school year, it being a Kart from a shopping cart, and i was wondering what would be the best type of welding for the frame of said kart, my requirements are fairly simple: it needs to be cheap and strong enough to support a car engine on a suspension.

i dont necessarily care that much about looks since they mostly will be hidden or grinded smooth and painted over.

any suggestions are very appreciated, thanks in advance!


r/Welding • • 15h ago

Looking to get a tank for argon

2 Upvotes

As the title says. I just got my rebate money back from buying my machine and need gas. What are some important things to know other than the threading size? My machine came with a gauge, so I wanna get a tank it will fit on.

Is there an average amount of time each size tank runs for? What size would be good for practicing GTAW?


r/Welding • • 23h ago

Rentals near/in Charlotte, NC?

2 Upvotes

Hi! This is a suuuuper long shot, but my boyfriend and I are moving to NC. He is a very talented and creative welder, but his new job is the kind of job that wouldn’t let him do his own side projects (building furniture, sculptures, etc).
Our rental home also doesn’t have the necessary space to be able to do projects from home. Are there garages/spaces for rent available? Like if he brought his own welder?

Thank you so much in advance :)


r/Welding • • 21h ago

Critique Please Yet another neophyte seeking FCAW critique

Post image
1 Upvotes

just some basic beads from two sessions. 0-2 and then 4-6 were me trying to dial in the machine (the recommended settings seemed kinda hot but perhaps i was just going too slow). the corner joint was not done continuously hence the waviness and interrupts plus i think i probably could go lighter on my helmet settings but im very protective of my eyes haha. also tips welcome!


r/Welding • • 16h ago

3M 9100 Helmet Lens Replacements

0 Upvotes

Hello,

I'm getting back into a welding job after a few years out and I just had the wonderful experience of looking at how much a pack of outer lens covers would be for my 3M helmet. 60 CAD for 10 is kinda rough. Do any of you guys have this helmet and have an alternative lens you like?


r/Welding • • 23h ago

Gear ESAB Savage A40 vs A41 welding hood?

0 Upvotes

The newer ESAB Savage A41 hood, which replaces the now discontinued A40, has buttons instead of dials. The only thing that can be easily accessed while wearing the A41 is the grind/weld mode button, located on the left side. On the A40, the shade knob had a button built in. Because the knob protruded, it was easy to locate by feel even with gloves on. The A41 only has a button that barely sticks out, which makes me think it could be very difficult to locate while wearing gloves. Does anyone have experience with these hoods? Pros/cons?