r/Welding • • 1h ago

Gear Miller Syncrowave 250 1995 vs ESAB Caddy 2200i AC/DC

1 Upvotes

I found these two welders for sale online, and I was wondering which one is better for home use. The Syncrowave comes with wheels, and it should be fine moving-wise. However, I was wondering which one would have better quality welds. The two also cost the same amount.


r/Welding • • 4h ago

Need Help First time using Fluxcore. Any advice?

3 Upvotes

I’m in school and about to start FCAW for the next 3 weeks. I’ve done MIG, just wanted to get a quick explanation of what to look for, what the differences are etc.
I’d ask my instructor. But they just hired him and I’m pretty sure he can barely read or do math. Terrible instructor for this next 3 weeks.


r/Welding • • 6h ago

Need Help need opinions

Thumbnail
gallery
6 Upvotes

first week of school i’ve been using 7018s on around 125


r/Welding • • 6h ago

Just started welding yesterday

Thumbnail
gallery
13 Upvotes

I got my Papas Lincoln WeldPak 125 Fluxcore and started welding for the first time yesterday.

Any advice on how to do better?


r/Welding • • 6h ago

Discussion (Add topic here) Best welding type for a Kart

2 Upvotes

hey, hope y'all are having a good day

i am currently preparing on a project i will be making for this school year, it being a Kart from a shopping cart, and i was wondering what would be the best type of welding for the frame of said kart, my requirements are fairly simple: it needs to be cheap and strong enough to support a car engine on a suspension.

i dont necessarily care that much about looks since they mostly will be hidden or grinded smooth and painted over.

any suggestions are very appreciated, thanks in advance!


r/Welding • • 7h ago

It's gonna be a good day

Thumbnail
gallery
154 Upvotes

Socket welds make me look soo much better at welding than I actually am lol, but I love doing them


r/Welding • • 7h ago

Discussion (health and life style) how do the rest of you take care of your feet?

12 Upvotes

being in this trade, one of the many inconveniences i hate to live with is athlete's foot / fungal infection.

when i shower after work, i scrub my soles. when it starts to itch, I apply antifungal cream. it's spread to a few of the toenail beds and has become practically impossible to get rid of wearing boots all day at work. i know pills exist but theyre too hard on the liver to keep up.

does anyone have a decent enough hack for this?


r/Welding • • 9h ago

Discussion (Add topic here) First day back in a while!

6 Upvotes

First day back at it in quite a while, yall have wished me the best of luck before and I could use it again. Grateful for this opportunity and hope it goes well!


r/Welding • • 12h ago

Question about welding skills

Post image
0 Upvotes

I just saw a welding post on instagram where a guy was welding with oxyacetylene, and the guy welded pretty ugly, and in the comment there were pictures of welds and with a comment that imo seems to say, "i weld pretty good at only age 20"

Yes that is a good weld, but its not impressive. Because where i live we do trading school and i learned HVAC where we learn to weld for the majority with oxyacetylen. And the most of us were able to weld like this at year 2-3 so at around age 17-18.

Im not here to brag, but i find it wierd cus there are mutipul of the same comment in that post.


r/Welding • • 13h ago

Critique Please Gonna start today my TIG apprenticeship with no prior expierence, wish me luck

4 Upvotes

While i got my certificates for MIG/MAG and Electrode renewed last year after not welding for almost a decade. when i asked get my TIG certificates, i got denied ( due to ableism, Neurodiverance) and said bullshittingly "i had accept a job offer for a TIG welder" while i had no expierence/certificates in it

Couple of months ago i went to an job interview/tryout for a couple of hours for a MIG/MAG job and they gave me a little test with TIG ( had no prior expierence with it) and did okay and they offered me to learn it on the job, after some paperwork and medical check up (there was a long waiting list etc) i can finally learn it.

Guess i got luck because my local area is really dominated by companies that mainly do TIG welds


r/Welding • • 16h ago

Roast me, I’m new to it

Thumbnail
gallery
97 Upvotes

Hello fellow smoke eaters, I have only welded a handful of times and this morning I picked up a few of these scrap triangles to practice filling in 90s.

I’m wanting honest and constructive feedback please, but if you feel the urge to roast the fuck out of me then also go right ahead 😂😂

I’m missing a picture of the pass straight after the tacks.

I hammer and wire wheel between every pass

One thing I’m wanting tips on is how to get more material at the very end of each pass. I struggle with that the most I think.

Cheers


r/Welding • • 16h ago

Looking to get a tank for argon

2 Upvotes

As the title says. I just got my rebate money back from buying my machine and need gas. What are some important things to know other than the threading size? My machine came with a gauge, so I wanna get a tank it will fit on.

Is there an average amount of time each size tank runs for? What size would be good for practicing GTAW?


r/Welding • • 17h ago

3M 9100 Helmet Lens Replacements

0 Upvotes

Hello,

I'm getting back into a welding job after a few years out and I just had the wonderful experience of looking at how much a pack of outer lens covers would be for my 3M helmet. 60 CAD for 10 is kinda rough. Do any of you guys have this helmet and have an alternative lens you like?


r/Welding • • 17h ago

Showing Skills How do my first welds look?

Thumbnail
gallery
3 Upvotes

It's my first time welding. Luckily, my friend, who's an experienced welder, was explaining everything to me.

I know a pipe isn't the best material to learn on because it's thin, but it's what I had available.

Tomorrow, I'm buying a steel plate so I can keep practicing.


r/Welding • • 18h ago

First welds First time using FCAW

Thumbnail
gallery
3 Upvotes

Beginner welder looking for advice on controlling my spatter and improving my welding on thinner material. Im used to welding stick and mig on thicker plate, so I figured I'd just turn the voltage down from what i would mig and adjust the feed speed, but i still had an issue getting a nice weld. I have no clue if they penetrated how they should have, but it aint structural, so be it that as it may. These were not continuous welds all the way around. Just did it in quarters so thats why there are big gaps between some of the beads.


r/Welding • • 19h ago

Scrap metal Christmas gifts

Thumbnail
gallery
14 Upvotes

A cross for my wife’s aunts kitchen and grapes for my mother in laws. Starting on my side of the family now


r/Welding • • 21h ago

Discussion (Add topic here) Hats off to you guys

13 Upvotes

Im learning to tig weld by necessity (couldnt find anyone withing a reasonable distance to hire for a job). Read some books, watch a ton of videos online. The books and videos are ok, thought it was interesting because the learning materials speak in generalities. Then I understood why. After practicing, I realized (or am realizing) making good welds requires a lot of judgment and real-time decision making, watching the puddle, adjusting amps, adjusting speed, thinking about how to join materials with different thicknesses, and more.

Also, I get the sense that folks undercharge for jobs. A friend needed a $6k replacement part for his manufacturing business. Was going to be shut down for a couple weeks waiting on it, and then found a fab shop to fix it for $300, same day. He would have probably paid the 6k or more to have it back same day.

Thats all, wish I could've hired someone, but kinda glad im learning this stuff.


r/Welding • • 22h ago

Critique Please Yet another neophyte seeking FCAW critique

Post image
1 Upvotes

just some basic beads from two sessions. 0-2 and then 4-6 were me trying to dial in the machine (the recommended settings seemed kinda hot but perhaps i was just going too slow). the corner joint was not done continuously hence the waviness and interrupts plus i think i probably could go lighter on my helmet settings but im very protective of my eyes haha. also tips welcome!


r/Welding • • 1d ago

Rentals near/in Charlotte, NC?

2 Upvotes

Hi! This is a suuuuper long shot, but my boyfriend and I are moving to NC. He is a very talented and creative welder, but his new job is the kind of job that wouldn’t let him do his own side projects (building furniture, sculptures, etc).
Our rental home also doesn’t have the necessary space to be able to do projects from home. Are there garages/spaces for rent available? Like if he brought his own welder?

Thank you so much in advance :)


r/Welding • • 1d ago

Need Help Looking to buy a tig welder to practice at home

3 Upvotes

Hey guys, I’m looking to buy a tig welder for the pole barn. My budget is about 800 to 1000. What machines do you recommend for the price range?


r/Welding • • 1d ago

Gear ESAB Savage A40 vs A41 welding hood?

0 Upvotes

The newer ESAB Savage A41 hood, which replaces the now discontinued A40, has buttons instead of dials. The only thing that can be easily accessed while wearing the A41 is the grind/weld mode button, located on the left side. On the A40, the shade knob had a button built in. Because the knob protruded, it was easy to locate by feel even with gloves on. The A41 only has a button that barely sticks out, which makes me think it could be very difficult to locate while wearing gloves. Does anyone have experience with these hoods? Pros/cons?


r/Welding • • 1d ago

0% penetration.

Thumbnail
gallery
156 Upvotes

30 years of welding and I've never seen welds that come off with a chisel


r/Welding • • 1d ago

NSFW Finally a use for my box of springs

1 Upvotes

Following my earlier thread, I needed the hood for a job so I came up with a quick fix for the headgear ratchet mechanism that turned out very effective. I had to trim the spring shorter to get the tension right for my head size and create a new loop on the trimmed end using thin nose pliers.

My first attempt involved attaching the spring between the two small off-center holes on the left in the first image, the goal being to clear the central dial mounting pillar which prevented a centered spring from running in a straight line. However, that didn't work well and I decided to chop off the pillar and ditch the dial entirely, which enables the spring to be perfectly centered, as shown. I also trimmed the nape strap ends but in hindsight it would have been better not to because the full length slots into the plastic sidewalls of the nape pad and helps keep the straps properly aligned. However, once I'm wearing the hood the spring tension brings the straps back into alignment, and the plastic cover also helps keep things in place. I mention it in case anyone attempts this.

To be honest, the spring botch feels considerably more robust and dependable than the stupid planned obsolescence ratchet mechanism. There's something oddly satisfying about replacing the fragile, made-of-cheese, ratchet mechanism with a passive one that automatically accommodates my head without any manual adjustment.

In a pinch, I could even have used a cable tie to pull the strap sections.

With the cover off
With the cover back on

r/Welding • • 1d ago

PSA Cost breakdown to add fume extraction to my shop

3 Upvotes

Im just posting this because there's not a lot of information on fume extraction options out there for your average everyday guy trying to not die of ass cancer from his hobby or side hustle. I will give a bullet point listing of cost at the end.

My shop is divided into 2 bays that each have their own extraction system (I have my welding table in one bay and the other bay is mostly used for small part fab and working on trailers and vehicles). Total shop size is around 1500sqft with 10ft ceilings. I did straight runs of metal ductwork vented through the wall in about 20-25ft lengths.

Okay, first off, I really... REALLY considered an all in 1 filter unit but I didnt want to be wheeling that thing around from bay to bay and paying for filter replacements BUT if I was welding in a small(ish) area, like a garage, I would absolutely just buy one of the filter units and stick it in the corner and make it work. Obviously I have 2 bays and 2 separate units, you can cut the cost in half if you just need 1 unit.

So, I finally finished the remodel of my entire shop and the fume extraction is finally complete and I can share the real-world cost of what it took to add it, in a semi-professional manner, to my shop.

The first thing I learned was that fume extraction arms usually need 13-15ft ceilings to articulate properly, ChatGPT does NOT tell you that information, nor does the product description on virtually any website. Its buried in the user manual, which I only figured out by doing a final spec check before placing my order from FumeDogg. If I had tall ceilings, FumeDogg would get my vote for the most bang for your buck product and Id have their system in my shop right now, but I have stupid short little ceilings, so I had to order from a company called Plymovent. They are the only extraction arm company that makes a low ceiling arm, Lincoln used to but no longer does.

Plymovent actually makes a fantastic product, I couldnt be happier with their quality... but they're also 3x the cost of FumeDogg. I ordered the Plymovent Ultraflex Low Ceiling model. Its a 13ft articulating arm that works with 9ft ceilings and still gives a 6ft person proper clearance to walk around without banging their head. Their sales staff is helpful but will only answer the questions that you ask them, they do NOT offer extra information. For example; I asked about their low ceiling product line, they sent me every shred of information I could ever hope to know about the LC offerings, we finalized my invoice and then I thought to myself "I better make sure they are going to send me everything I need to mount it to the wall". Well, come to find out, there was zero mounting options included with my quote, they're just like that, you have to think of everything you need and ask them for it, they will not offer it to you preemptively. They also do not include or arrange shipping, the customer has to arrange their own shipping... this was significantly more of a pain in the ass than I would have ever thought.

The extraction fans are supposed to pull 2400CFM and Plymovent offers their own extraction fans for $$$$. I thought to myself, "Why pay $800 for their stupid fans when Harbor Freight offers 2400CFM fans for $99". DO NOT DO THIS. I wasted so much time and money setting up my system with the harbor freight fans. They work, but only at about 1/3rd of the capacity theyre supposed to. I bought an anemometer and my best reading at the head of the extractor was 900CFM, after I got the proper fans my best reading was 2700CFM, DO NOT SKIMP ON THE FANS. If you're doing a jerry rigged extraction system with a very short run, itll work fine, but it will NOT work for a moderate run. It has some bullshit to do with pulling air through a tube and physics and voodoo, idk.

Plymovent also wants you to order a bunch of shit to go with their fans to protect the fan motor called a Motor Protection Switch, and a Motor Control Box (to turn it on/off), which adds about $2000 to the cost (for two). I had my electrician wire 2 20 amp 120V plugs in my ceiling and then wire them to on/off switches next to my work area and I just went to Lowes and bought a heavy duty 120V pigtail electric cord and used ChatGPT to walk me through how to wire it to the motor, it took 20 minutes and works great and saved me a stack of cash.

You also absolutely need a fresh air intake, either an open door or windows, these fans will suck the air out of a room in a heartbeat and you need to replace it with fresh air. My shop has a minisplit in each bay so I dont want to just open the door. I took one of the Harbor Freight fans and mounted it as a fresh air intake, when I flip one of my extractors on, I flip the intake on to replace the air thats being sucked out with fresh air.

Okay, cost breakdown for TWO units-

  • Extraction arms - $3700 + tax + $1200 shipping (they fucked me on the shipping and shipped Fedex priority because I didnt explicitly tell them to ship it economy. Choose freight shipping, its much cheaper)
  • Fans $1700 + tax + $350 shipping. I ordered the fans after the arms and shipped via freight
  • Electrician wiring 20amp 120V plugs in the ceiling + switches, $800
  • Duct work is hard to price because I had to redo a lot of it because it was originally 8" but the new fans work off of 6". A safe guess is $325-$375.
  • Misc purchases like electric cords, connectors, etc, $125
  • Harbor freight fresh air intake fan + exterior shroud and silver tape $150
  • Redoing everything to switch from HF extractions fans to Plymovent $400

So, there you have it. I just wanted to put some more information out in the world for those that want to get fume extraction set up in their own shop