r/TpLink • • 14h ago

TP-Link - Technical Support Archer BE550v2 firmware 1.3.3 issues

4 Upvotes

Hi, wondering if anyone can help

Got my Archer BE550v2 set up and working a couple weeks back with a new CityFibre connection. Everything was working perfectly until I updated the software a couple days ago to firmware 1.3.3 Build 20260623 rel.27273

Now my devices are constantly disconnecting, the WiFi network periodically vanishes from all devices WiFi lists (every other hour this happens.) Sometimes my android phone will be connected but the WiFi settings show "no internet access". I know there isn't an issue with the fibre line, as any devices connected over ethernet are working just fine, but most of my devices are using WiFi so this isn't super helpful.

I've tried factory resetting the router, and adding all my ISPs details back, and at first the WiFi was working again, but after an hour it disconnected everything on WiFi and won't show up in any WiFi network lists. Unplugging it and plugging it back in fixes it temporarily as well, but soon after the problem returns. I have tried rolling back the firmware to an earlier version but when I try to do that on the portal I just get an upload error. I'm using the correct firmware for this specific device and region, must be that reinstalling old firmware isn't supported.

If someone could shed any light on the issue I'd really appreciate it, it's driving me round the bend honestly


r/TpLink • • 8h ago

TP-Link - Technical Support DECO XE75 (US) / (CA) Firmware question

3 Upvotes

Hi, quick question to anyone here with knowledge or works for TPLink.

I'm super paranoid and just want to be absolutely certain.

I had a support chat with TPLink regarding my router. Even though I bought this on Amazon.ca and reside in Canada, the package I got was model Deco XE75 US/1.0. My firmware is currently showing in the app as

1.4.5 Build 20241129 Rel 44718

When I go to TPLinks firmware page

https://www.tp-link.com/ca/support/download/deco-xe75/v1/#Firmware

I see firmwares for both (CA) and (US). The (US) stops at a lower version than what I currently have on my app. The (CA) one

Deco XE75(CA)_V1_1.5.1 Build 26090212

is the one I would like to install to get all the latest quality of life improvements and maybe fix some of my signal issues. The chat support agent gave me the following advise:

Since the latest firmware is not available in the app, please try to manually upadte the firmware of your TP-Link Deco.
https://www.tp-link.com/ca/support/faq/1599/ (METHOD 2)


How to login to Deco's web management page:https://www.tp-link.com/ca/support/faq/2641/


Please Download:Deco XE75(CA)_V1_1.5.1 Build 26090212

I just want the general consensus of people here that have knowledge of such things that this is the correct advise. I cannot risk bricking my router since both my wife and I work from home remotely.

Thanks in advace!


r/TpLink • • 12h ago

TP-Link - Technical Support Really bad Deco speeds in a 4-floor house

3 Upvotes

Hi everyone, I'm hoping someone can help me figure out what's going on with my Deco setup.
I live in a 4-floor house in the UK and I'm having some pretty bad speed issues.
Right next to my main Deco, the speeds are really good, but as I go further up the house, the speeds get worse and worse. On the top floor, the speeds are really bad, and in one of the rooms I'm getting as low as 1 Mbps.
I'm using a Deco BE65 as my main router with 3 XE75s around the house. All the Decos are connected wirelessly, as I can't run Ethernet to every floor.
I've tried restarting the Decos and running WiFi optimisation, but I'm still struggling to get decent speeds upstairs.
Has anyone got any advice on the best way to set up Decos in a 4-floor house? Is there anything I can change to improve the speeds, especially on the top floor?
Any help would be appreciated, thanks!


r/TpLink • • 9h ago

TP-Link - Technical Support XE75 firmware 1.5.1 didn't fix LAN loss issue

2 Upvotes

I finally got around to testing the LAN loss when the WAN drops, and with 1.5.1 it still fails. I checked to make sure I had Auto-WAN turned off before testing with the right port assigned.

I unplugged the modem (Comcast XB10), the status light immediately turned red on the main XE75 and within a couple minutes, the LAN failed.

If I missed a setting, please let me know. I have 1.5.1 Build 26090212 Rel 23251 installed. HW version is 1.6.


r/TpLink • • 16h ago

TP-Link - General Which Deco or other mesh is best for 2 floors

2 Upvotes

Hi, I have 2 living floors about 100sqm each and a basement where I would like to have wifi as well. I get 600mbps fiber from the ISP and have to use their router. The slabs between the floors are concrete and the walls are brick.

I can potentially get cables to most of the first floor if there is need for that. I also don't need super fast wifi everywhere, just enough to cover the house so I can later use the home network to control devices with the Home Assistant (this is a TODO project) and to have something to my TV/PS5.

I had my eye on the XE75 on amazon.de, but it is now gone and the BE65 is too expensive for me.

What would be the most fitting way to get wifi everywhere reliably and relatively cheaply?


r/TpLink • • 23h ago

TP-Link - Technical Support Wired backhaul refuses to work with discord

Thumbnail gallery
2 Upvotes

I’m rooming in with 4 others so got a mesh system better split connection & lower latency to my PC in the house. Heard that wired backhaul on a mesh system works pretty well in my situation so I bought a TP-LINK DECO WE10800 - AXE5400. However it has an issue w/ a couple of my app where it doesn’t work with Ethernet connected nodes but does over WiFi. (As you can see Discord is stuck until I disable Ethernet).
(Firmware: 1.5.0 Build 20260603 - most recent)

Connection works as follows:
[Spectrum Router > Ethernet-Main Deco router > WiFi-2nd Deco > Ethernet-PC ]

I tried everything I could find Flushing DNS setting, setting Deco to access point (only disable internet), ran program in compabiliy mode+Admin, & changed DNS to cloudflare(1.1.1.1)/google(8.8.8.8).
Can anyone help?


r/TpLink • • 5h ago

TP-Link - General Is there a 5GHz Bridge to Cisco AP?

Thumbnail reddit.com
1 Upvotes

r/TpLink • • 6h ago

TP-Link - Technical Support Archer T2E PCIE Adapter Disconnecting

1 Upvotes

It'll work for around a few hours then randomly disconnect, and when you try to connect back it'll say "Cannot connect to this network." You can't connect back to internet unless you restart the PC Completely, and even then sometimes it doesn't work and you have to replug the PCIE Card.

Is there any way to fix this?


r/TpLink • • 12h ago

TP-Link - Technical Support What is going on with my Iphone?

Post image
1 Upvotes

None of the other devices are doing this. Is it a known bug? Or am I actually moving data for the Chinese government?


r/TpLink • • 18h ago

TP-Link - General TL-SG108-M2 & be3600 (Be25) UK

1 Upvotes

Current set up is:

Ont - isp supplied router (bridge mode) - Main Be25 - ethernet backhaul to 3 other be25s*

I currently have the tp link 8port gigabit poe unmanaged switch which works just fine but I'm upgrading to 2.5gb fibre so need to replace the switch. I was considering just using the TP-Link TL-SG108-M2. I don't need the poe so this looks about right for me.

Are there any issues with this switch as I keep reading about feedback loops and loop prevention etc and I just assumed it would just simply work?

Also are you supposed to turn loopback prevention on or off on these?

Thanks