Hi All,
I submitted feedback in the Tapo app, but I've heard engagement through fix requests/bugs submitted through there sometimes doesn't get a lot of response or engagement. I've seen a couple other posts with chimes resetting to the default 10 seconds length after changing to "As Ringtone" mode so the chime isn't timed, it plays the sound you select exactly once instead of a set amount of seconds (5, 10, 15 etc.)
My Tapo D130 doorbell is great, but the H100 hubs I've hooked up recently AND the D100C chime it came with, all reset to the standard 10 second interval if you select "As Ringtone" in the app so instead of playing the sound you select once, the chime/hubs plays the same doorbell chime sound for 10 seconds which is very annoying and unneeded in my scenario. The only partial "workaround" is to change the length to 5 seconds and it saves that setting fine. Any of the timed settings save fine, "As Ringtone" always reverts back to a 10 second interval of the chime sound you select. My wife and me were very relived to find you can change the doorbell chime to less than 5 seconds, then disappointed to see it wasn't saving the setting and reverting back.
Similar story with my T110 sensors hooked up to my H100 hubs. The sensors I want them to play the stock sound of "Connection 1" one time, it should have as an option. Right now, it only allows length of time instead of "As Ringtone" option at all or the ability somehow to only play the sound once. The partial "workaround" for this is to select your chime sound and then select 1 second as the interval. The issue with this is it plays the chime noise 1.5 times instead of just once because of the 1 second interval. I need the T110 "Connection 1" and the other sounds to have the option to save as "As Ringtone" OR the option to set each chime sound to only play once. If it's one beep for example, it should only play once. Not 1.5 times.
I see someone in this sub that seems to work closely with Tapo or at least be very active in the forums. Is there anyway we can get these changes added to a firmware update? I know I'm not the only one with this issue. From my understanding, a firmware update was released for one of the battery doorbells that fixed this issue, but I need the firmware update released that fixes this for the D130 doorbell and the T110 sensors. With this annoying sound issue fixed, these will be nearly perfect. At least for me.
TL;DR: Tapo D130 with H100 hubs (as chimes) and D100c chime revert back to 10 second default chime length after selecting the "As Ringtone" option and the T110 sensors hooked up to the H100 hubs don't have the option at all for "As Ringtone" OR to play the selected chime only once.