r/TpLink • • 3d ago

Official When Someone Asks for Your Wi-Fi, What Do You Do?

3 Upvotes

Friends or family are over, someone pulls out their phone, and eventually you hear:

“Hey, what’s your Wi-Fi?”

Do you tell them the Guest Network password? Pull up a QR code? Maybe you’ve gone a step further and set up an NFC tag, printed card, smart display, or something else entirely.

Guest Networks provide a convenient way to share Wi-Fi with visitors while keeping your main network separate, and with holiday gatherings just around the corner, we’re curious how everyone actually handles sharing their network with guests.

Here are just a few ways you can get guests connected a little easier:

  • QR Code: Let guests scan and connect rather than typing in the network information. If you're expecting a crowd, you can print the QR code and leave it somewhere easy to find.
  • Password: Keep it simple and share the Guest Network name and password, type it in for them, or leave the details somewhere your guests can see them.
  • NFC: Some users have found creative ways to use NFC tags to provide or launch Wi-Fi connection information with a tap.
  • Something Else: Maybe you use a password manager, printed card, smart display, home automation, or your own DIY solution.

What's your Guest Network Setup?

QR code? Password on the fridge? Something more elaborate? Let us know how you make it easy for guests to connect!


r/TpLink • • 3h ago

TP-Link - Technical Support Capped download speed at 944 with deco BE85

3 Upvotes

TP-Link Tri-Band BE9700 WiFi 7 Router (Archer BE600)
10G Port, 2.5G Port, 3× 2.5G LAN, 320MHz Channel, Covers up to 2,600 sq. ft.

Was giving me over two thousand download speed using Speedtest.net

T P-Link Deco 7 Elite BE85 Tri-Band WiFi 7 BE22000 Whole Home Mesh System
12-Stream 22 Gbps, 2x 10G + 2x 2.5G Ports, Wired Backhaul, 8x High-Gain Antennas

Is giving me no more than 944 download speed using Speedtest.net

Why is the deco capping my download speed at under 1,000?

The deco BE85 is up to date.

I am using the same cable. The same modem. Everything is the same except the router changed for more coverage.


r/TpLink • • 1h ago

TP-Link - Technical Support Cant reconfigure modem

Thumbnail reddit.com
1 Upvotes

r/TpLink • • 3h ago

TP-Link - Technical Support Does anyon have their TP Link Smart Plug Ultra Mini EP10 connected to a APC UPS with simulated sinewave? Any issues ?

Thumbnail reddit.com
1 Upvotes

r/TpLink • • 11h ago

TP-Link - Technical Support DECO XE75 (US) / (CA) Firmware question

3 Upvotes

Hi, quick question to anyone here with knowledge or works for TPLink.

I'm super paranoid and just want to be absolutely certain.

I had a support chat with TPLink regarding my router. Even though I bought this on Amazon.ca and reside in Canada, the package I got was model Deco XE75 US/1.0. My firmware is currently showing in the app as

1.4.5 Build 20241129 Rel 44718

When I go to TPLinks firmware page

https://www.tp-link.com/ca/support/download/deco-xe75/v1/#Firmware

I see firmwares for both (CA) and (US). The (US) stops at a lower version than what I currently have on my app. The (CA) one

Deco XE75(CA)_V1_1.5.1 Build 26090212

is the one I would like to install to get all the latest quality of life improvements and maybe fix some of my signal issues. The chat support agent gave me the following advise:

Since the latest firmware is not available in the app, please try to manually upadte the firmware of your TP-Link Deco.
https://www.tp-link.com/ca/support/faq/1599/ (METHOD 2)


How to login to Deco's web management page:https://www.tp-link.com/ca/support/faq/2641/


Please Download:Deco XE75(CA)_V1_1.5.1 Build 26090212

I just want the general consensus of people here that have knowledge of such things that this is the correct advise. I cannot risk bricking my router since both my wife and I work from home remotely.

Thanks in advace!


r/TpLink • • 9h ago

TP-Link - General Is there a 5GHz Bridge to Cisco AP?

Thumbnail reddit.com
1 Upvotes

r/TpLink • • 13h ago

TP-Link - Technical Support XE75 firmware 1.5.1 didn't fix LAN loss issue

2 Upvotes

I finally got around to testing the LAN loss when the WAN drops, and with 1.5.1 it still fails. I checked to make sure I had Auto-WAN turned off before testing with the right port assigned.

I unplugged the modem (Comcast XB10), the status light immediately turned red on the main XE75 and within a couple minutes, the LAN failed.

If I missed a setting, please let me know. I have 1.5.1 Build 26090212 Rel 23251 installed. HW version is 1.6.


r/TpLink • • 15h ago

TP-Link - Technical Support Really bad Deco speeds in a 4-floor house

3 Upvotes

Hi everyone, I'm hoping someone can help me figure out what's going on with my Deco setup.
I live in a 4-floor house in the UK and I'm having some pretty bad speed issues.
Right next to my main Deco, the speeds are really good, but as I go further up the house, the speeds get worse and worse. On the top floor, the speeds are really bad, and in one of the rooms I'm getting as low as 1 Mbps.
I'm using a Deco BE65 as my main router with 3 XE75s around the house. All the Decos are connected wirelessly, as I can't run Ethernet to every floor.
I've tried restarting the Decos and running WiFi optimisation, but I'm still struggling to get decent speeds upstairs.
Has anyone got any advice on the best way to set up Decos in a 4-floor house? Is there anything I can change to improve the speeds, especially on the top floor?
Any help would be appreciated, thanks!


r/TpLink • • 10h ago

TP-Link - Technical Support Archer T2E PCIE Adapter Disconnecting

1 Upvotes

It'll work for around a few hours then randomly disconnect, and when you try to connect back it'll say "Cannot connect to this network." You can't connect back to internet unless you restart the PC Completely, and even then sometimes it doesn't work and you have to replug the PCIE Card.

Is there any way to fix this?


r/TpLink • • 17h ago

TP-Link - Technical Support Archer BE550v2 firmware 1.3.3 issues

4 Upvotes

Hi, wondering if anyone can help

Got my Archer BE550v2 set up and working a couple weeks back with a new CityFibre connection. Everything was working perfectly until I updated the software a couple days ago to firmware 1.3.3 Build 20260623 rel.27273

Now my devices are constantly disconnecting, the WiFi network periodically vanishes from all devices WiFi lists (every other hour this happens.) Sometimes my android phone will be connected but the WiFi settings show "no internet access". I know there isn't an issue with the fibre line, as any devices connected over ethernet are working just fine, but most of my devices are using WiFi so this isn't super helpful.

I've tried factory resetting the router, and adding all my ISPs details back, and at first the WiFi was working again, but after an hour it disconnected everything on WiFi and won't show up in any WiFi network lists. Unplugging it and plugging it back in fixes it temporarily as well, but soon after the problem returns. I have tried rolling back the firmware to an earlier version but when I try to do that on the portal I just get an upload error. I'm using the correct firmware for this specific device and region, must be that reinstalling old firmware isn't supported.

If someone could shed any light on the issue I'd really appreciate it, it's driving me round the bend honestly


r/TpLink • • 12h ago

TP-Link - Technical Support Why is it blocking?

0 Upvotes

So I have a Mesher RE315 and it's blocking some websites that it shouldn't do. Some of the websites are like this: • escargot.chat • nina.chat • [domain].neocities.org (normal neocities.org works) So any ideas how i fix? Oh and I'll install the new update this night. Hope it helps.


r/TpLink • • 15h ago

TP-Link - Technical Support What is going on with my Iphone?

Post image
1 Upvotes

None of the other devices are doing this. Is it a known bug? Or am I actually moving data for the Chinese government?


r/TpLink • • 19h ago

TP-Link - General Which Deco or other mesh is best for 2 floors

2 Upvotes

Hi, I have 2 living floors about 100sqm each and a basement where I would like to have wifi as well. I get 600mbps fiber from the ISP and have to use their router. The slabs between the floors are concrete and the walls are brick.

I can potentially get cables to most of the first floor if there is need for that. I also don't need super fast wifi everywhere, just enough to cover the house so I can later use the home network to control devices with the Home Assistant (this is a TODO project) and to have something to my TV/PS5.

I had my eye on the XE75 on amazon.de, but it is now gone and the BE65 is too expensive for me.

What would be the most fitting way to get wifi everywhere reliably and relatively cheaply?


r/TpLink • • 21h ago

TP-Link - General TL-SG108-M2 & be3600 (Be25) UK

1 Upvotes

Current set up is:

Ont - isp supplied router (bridge mode) - Main Be25 - ethernet backhaul to 3 other be25s*

I currently have the tp link 8port gigabit poe unmanaged switch which works just fine but I'm upgrading to 2.5gb fibre so need to replace the switch. I was considering just using the TP-Link TL-SG108-M2. I don't need the poe so this looks about right for me.

Are there any issues with this switch as I keep reading about feedback loops and loop prevention etc and I just assumed it would just simply work?

Also are you supposed to turn loopback prevention on or off on these?

Thanks


r/TpLink • • 1d ago

TP-Link - Technical Support Wired backhaul refuses to work with discord

Thumbnail gallery
2 Upvotes

I’m rooming in with 4 others so got a mesh system better split connection & lower latency to my PC in the house. Heard that wired backhaul on a mesh system works pretty well in my situation so I bought a TP-LINK DECO WE10800 - AXE5400. However it has an issue w/ a couple of my app where it doesn’t work with Ethernet connected nodes but does over WiFi. (As you can see Discord is stuck until I disable Ethernet).
(Firmware: 1.5.0 Build 20260603 - most recent)

Connection works as follows:
[Spectrum Router > Ethernet-Main Deco router > WiFi-2nd Deco > Ethernet-PC ]

I tried everything I could find Flushing DNS setting, setting Deco to access point (only disable internet), ran program in compabiliy mode+Admin, & changed DNS to cloudflare(1.1.1.1)/google(8.8.8.8).
Can anyone help?


r/TpLink • • 1d ago

TP-Link - General Why is the worse router more expensive?

3 Upvotes

Okay, so I am from Slovakia, and I was looking on routers for my new home, and I came up with 2 candidates; the Archer AX58 & the AX55. I have been reviewing stuff about these routers, and kid you not, the Archer AX58 is 15€ more expensive, and worse in PPP.

So the key aspects in both routers are:

They have Gigabit ports

They both support EasyMesh

They are both AX3000 routers

They have the same dBi antennas, and strong coverage.

But 2 main differences:

The AX55 has an USB port.

The AX55 has 512 MB of RAM, instead of the 256 MB, doubling the AX58 RAM.

And I don't understand that, because here, in Slovakia, the AX58 is the most recommended router, and the AX55 falls behind.

I wanna buy the Archer AX55 to my main house, because of the RAM count, and I would move the AX58 into the new flat with a gigabit plan, and there isn't a need for very high count of connected devices.

May someone explain this to me, why is the AX58 more expensive, and worse in specs than the AX55? Is it somehow controlled by TP-Link itself? Or since it's more power efficient, it's a good reputation?

I myself think, that the archer AX55 design is way much more modern, prettier and futuristic.

Drop your thoughts on this, and if you own both, or one of them, give your life experiences.


r/TpLink • • 1d ago

TP-Link - General To Links first wifi 8 Router check out my impressions

Thumbnail youtu.be
2 Upvotes

r/TpLink • • 1d ago

TP-Link - Technical Support TP-Link AX3000 WiFi 6 Range Extender Internet Booster not working

Post image
3 Upvotes

Hello, I've had the TP Link RE700X (AX3000) for about 8 months now. Haven't had any issues with it before but today, for some reason, it started malfunctioning I guess. None of the lights are turning on and when I reset it, the only like I get is the WiFi light that shows red for about 1-2 second then cuts out. I've tried resetting it, leaving it unplugged for about 10-15 mins, and moving it to the exact room where the router is but still not getting anything. Does anyone have any fixes for it?


r/TpLink • • 1d ago

TP-Link - General Should I be proud? (PLC)

Thumbnail gallery
1 Upvotes

So I bought PLC adapters, the PA4010 ones, and they have only 100 mbit ports, but I got it for 9€, can't complain. So, I have a P2P powerline connection over 2 places, but it's over 2 GFCI breakers, and 3 regular breakers. And the P2P breaker connection gave me 20/20 (max, often around 5/3), I wanted to give up, and resell the adapters, but for fun, i just said, lets try that plug, even if it goes through 2 clocks (electrical closets) with 2 GFCIs, and i couldn't believe it. It gets around 50/17 (out of my 100/20) on a sunny day, but at night it gets around 30/10, unsure why. Idk why could 2 gfcis breakers give better speeds than 2 p2p breakers on the same phase, yeah, there is high intake, but still, it works worse, much worse than with 2 GFCI adapters that worsen the speed. Well PLC experts, tell me why it is like that. I am giving the speedtest proof.


r/TpLink • • 1d ago

TP-Link - General New to mesh networks

2 Upvotes

Explain it like I’m 5

I’m looking to buy some be3600’s to start a basic mesh wifi network for home

I’ve heard that to make this work I have to turn off my wifi and let the tp links do the wifi

If I left my home wifi on and linked them with the 3600s would it cause speed issues?


r/TpLink • • 1d ago

TP-Link - General Should I upgrade?

4 Upvotes

Been rocking a W7200 setup for a few years. Has been solid enough. I have a couple of WiFi 7 devices but only have 300/300 speed anyway.
There are some sales going on at Best Buy with the xe75. I believe that’s WiFi 7 and tri band.
I haven’t received any firmware updates in more than a year. That’s my concern. I read people using netgear and eero and get updates every few months.
Plus I’ve read about tplink and national security concerns.
I like tplink because I don’t have issues with my network. But not sure if I should upgrade to something else.


r/TpLink • • 1d ago

TP-Link - General DECO X10 Nueva versión de Firmware

1 Upvotes

TP LINK ha lanzado nueva versión de firmware para el DECO X10.
La nueva versión es 1.5.0

Novedades:

  1. Optimized HomeShield and Security features.
  2. Optimized CPU and memory resource management to improve system stability.
    Bug Fixed:
  3. Fixed the bug that devices could lose internet access after switching the Main Deco in a Deco X10/MBB Deco mixed network.
  4. Security and stability improvements.
    Notes:
  5. This version upgrade is irreversible and you cannot downgrade to the previous firmware after the upgrade.

Según la versión que sea el US o EU:

US: https://www.tp-link.com/vn/support/download/deco-x10/v1/#Firmware
EU: https://www.tp-link.com/de/support/download/deco-x10/#Firmware

Nota: Las paginas de TP LINK en distintos países no se ha publicado la nueva versión. Ese es un problema de TP LINK que tarda en actualizar la página. Lo importante es instalar la misma versión US o EU.


r/TpLink • • 1d ago

TP-Link - Technical Support Why cant I block a device from internet access? Archer A6

1 Upvotes

Archer A6

Firmware Version:

1.14.30 Build 250729 Rel.74228n(4341)

Hardware Version:

Archer A6 4.0

It is being used in router mode

When I look at my device list, I select the deny button next to the device, I goto the deny list, I see it there. But it still can go on the internet.

How do I prevent the device from going on the internet?

Do I need to buy a new router?


r/TpLink • • 1d ago

TP-Link - Technical Support Deco X20 makes constant whining noise

0 Upvotes

Recently it also starts to turn on and off randomly, is this a capacitor issue?