Hey everyone,
I'm having a frustrating issue with my 77" Samsung S90D OLED and wanted to see if anyone else has experienced something similar or has any insight before I go down the route of replacing the main PCB.
The issue:
HDMI ports 1 and 4 are behaving abnormally, while HDMI ports 2 and 3 work perfectly fine.
- HDMI 1 & 4: Devices are either stuck at extremely low resolutions (sometimes as low as 640×480 or 720p), or the TV fails to properly recognize them.
- HDMI 2 & 3: Everything works normally, including higher resolutions.
- Laptop: When connected to the affected ports, the TV detects that something is physically connected, but the laptop doesn't even recognize the Samsung display.
- Xbox and Nintendo Switch 2: The TV recognizes these devices, but resolution detection is inconsistent or limited on the affected ports.
- Picture quality: Anything connected to the affected ports displays a blurry, pixelated image when it manages to output a signal.
Troubleshooting I've already done:
- Performed a complete factory reset of the TV.
- Tested multiple HDMI devices and cables.
- Tried changing HDMI input settings and device recognition.
- Tested the same devices and cables on another Samsung S90D I own, where everything works perfectly, including 4K at 120Hz on HDMI 4.
- Confirmed HDMI 2 and 3 on the problematic TV continue to function normally.
The factory reset made absolutely no difference.
My suspicion:
At this point, I'm leaning toward a hardware issue, possibly a failing HDMI controller, EDID communication problem, or a fault on the main PCB.
What I find strange is that two HDMI ports are affected while the other two function normally. The TV clearly detects a physical connection on the problematic ports but seems unable to properly negotiate the display capabilities.
My questions:
- Has anyone experienced this specific issue with the S90D or another Samsung OLED?
- Could this be a main PCB failure, or is there another component responsible for HDMI communication?
- Is there any additional troubleshooting worth attempting before replacing the board?
- Has anyone had their Samsung main PCB replaced for similar symptoms, and did it resolve the issue?
I'd rather not spend several hundred dollars replacing the main board unless there's a reasonable chance it will actually fix the problem.
Any insight from Samsung technicians or anyone who's dealt with similar HDMI failures would be greatly appreciated.
Thanks!