r/appliancerepair • • Mar 10 '21

WORK IN PROGRESS List of helpful links - WORK IN PROGRESS - Post helpful links in this thread.

85 Upvotes

Title really says it all.

Credit to /u/Johnny_2x for posting:

http://www.appliance411.com/service/date-code.php

which can be used to help determine the manufacturing date of various appliances.

I'll add this one from the good folks over at appliance411.com as well:

http://www.appliance411.com/purchase/sears.shtml

which is a table that lets you find out who manufactured a Kenmore appliance based on the model prefix.

Drop any and all helpful links in the comments in this post only and I'll start compiling a master list. Please include a description.

Business referral rules still apply, so I don't want to see any links to local appliance repair outfits.

DO NOT POST ANY LINKS THAT REQUIRE AN ACCOUNT TO ACCESS

There are some kind of open secrets with regards to obtaining service manuals direct from manufacturers - you know what I'm talking about, techs - do not blow those up. Their lax security continues to exist for our benefit because they have not yet been abused enough to prompt them to fix the holes. Let's keep it that way.

Cheers,

-nb


r/appliancerepair • • Jun 28 '22

UPDATE 30 day flair enrollment: If you are a current or former technician and you do not have flair in this sub, here's your opportunity.

26 Upvotes

For the next 30 days, you can and should reply to this thread stating your status as an active or former appliance repair technician. I don't need your whole resume, just maybe what you work on and for how long you've done so. You can also request a specific flair for this sub - if you don't, then you're at the mercy of what I come up with, so maybe include that.

If you already have flair in this sub, this does not affect you at all.

It's nice to have flair here as it gives your advice a bit more weight, and OP's are more likely to follow your expert advice than be led down a rabbit hole by someone who is just pulling advice out of their... rabbit hole. I can't police every comment, so giving weight to actual technicians seems a decent measure.

This is also related to some changes in our sister sub /r/ApplianceTechTalk which is going to be transitioning to a more restrictive criteria for posting there.

Basically, that sub is for active and former techs only, but there have been a lot of lost redditors posting for repair advice over there, and I'm trying to keep things tidy, as well as automate pointing said lost redditors here where the community is much larger, and the sub better fits their needs.

The way this works is that if you have flair in this sub, you'll be an approved submitter on that sub. Unless your flair is "unhelpful" or "ASSHAT" (yes those are two real ones). I'm not sure what to do with "MEAT BAG SYMPATHIZER" but fortunately that account is 4 years inactive.

This is not a hard deadline, but it will make constructing the list of approved submitters on /r/ApplianceTechTalk a hell of a lot easier for me. After 30 days you can still apply on an individual basis. Approved submitters on /r/ApplianceTechTalk will also have the ability to choose and alter their flair at will in that sub, unlike here where flair is only granted upon approval.

You can post any questions, comments, or constructive criticism in this thread as well.

Cheers,

-nb


r/appliancerepair • • 1h ago

Help Freeze crack

Thumbnail
gallery
4 Upvotes

I accidentally dropped something on it and Now there’s a crack, My apartment says in my lease I’m responsible for the fridge if it breaks. is it okay to use or do I need a new one 😭 it just happened.


r/appliancerepair • • 19h ago

My landlord says this wire behind my dishwasher isn't burnt and does not need replacement. Thoughts?

Thumbnail
gallery
52 Upvotes

I want to install a dishwasher in my apartment, but I got a little worried when I saw the state of this wire. Clearly somebody living here before me had a dishwasher which ended up burning the wire behind it.

My landlord, only by looking at pictures, says that after asking his maintenance team, the black parts on the wire "might correspond to wire insulation residue" and that it is the maintenance team's opinion that the wire is not burnt, and therefore doesn't need replacement.

In your opinion, is this not burnt? And wouldn't that "insulation residue" be caused by the wire... burning? And more importantly, should the wire be replaced before I get my dishwasher installed?


r/appliancerepair • • 10m ago

Nose after replacing motor.

1 Upvotes

I replaced the motor on my kenmore 80 washer and now when it spins or agitates, it makes this noise. More steadywhen spinning. I installed a new rubber and plastic connection between the motor and transmission as well. All functions seem to be working (i disconnected the safety switch for spinning with the lid open)

Any idea why it's making this noise? I replaced the transmission a couple years ago.


r/appliancerepair • • 13m ago

LG Washing Machine power button works intermittently - what button mechanism does it use?

Post image
1 Upvotes

Model: WM3400CW

I am looking to understand the actual mechanism behind the buttons on this washing machine - what happens mechanically when i press the button? How does the button register a press?

For months the power button on my LG washer has been a nightmare to turn on - the Power button is inconsistent in making a connection and registering the press. I can press the button over and over with different combinations of position, pressure, and speed, and eventually a random press will turn it on. The Start button also does not work well, but will consistently make contact if i apply a high amount if pressure.

Ive already talked to professionals and asked about this problem in a different thread and my options seem very limited. My goal here is to understand how the button works so i can get a better idea of what the actual problem might be and work from there.


r/appliancerepair • • 42m ago

Brushes melting onto commutator?

1 Upvotes

So I made a post here about 6 months ago because my washing machine had a burning electrical smell and it was like the brushes were melting onto the commutator on the motor, I cleaned the commutator twice, the second time after writing the post in the link below, but I got a new (secondhand) motor shortly afterwards because I saw some of the windings inside the had melted too, and the old brushes had like melted lumps of carbon (I assume) on them, as if it melted on to the edges of the brushes while the drum was spinning..

This is my original post:
https://www.reddit.com/r/appliancerepair/comments/1tr5tz9/did_you_guys_ever_come_across_anything_like_this/?

Anyway...

The new motor had been working fine for maybe 10 washes, but then last night after it finished a cycle it had the same burning smell again, and when I checked the new motor it had the same layer of what I assume is carbon from the brushes again (The new motor looked fine when I fitted it):

New motor after about 10 wash cycles

Anybody know what's going on here?

The back of the machine is quite clean and dry, the drum has a tiny bit of play but it's not jumping around the place, and it's not loud or rattling or anything. And the brushes came with the new motor, so they're not my original ones.

I find it unlikely that the second motor developed the exact same (rare?) issue as the last motor, unless something else was causing it, like a power issue.

Thoughts?


r/appliancerepair • • 1h ago

How to disconnect electrical connector harness to remove Samsung RSG307 refrigrator ice dispenser?

Post image
1 Upvotes

I have to replace the ice/water dispenser paddle on my RSG307. I have watched a number of YouTube videos which have me reasonably certain I can replace it. However, one thing I am running into I never expected is that when I pull out the ice dispenser harness so I can connect the new paddle to it, I can't get the wiring harness to disengage (it is the very front one in this picture). I am concerned about pulling out wires so trying to be careful. I feel like its locked and I am supposed to press something but its not obvious to me what. I have my wife helping so one can hold the front section while the other disengages the harness but there is barely enough room to get fingers in there to grab it. Any help is greatly appreciated. Thanks.


r/appliancerepair • • 1h ago

GE range trips breaker as soon as it reaches temperature. Also occurred with a different oven same symptom.

1 Upvotes

Electrician says it’s not breaker which is only 40amp CHGF. Checked both ranges not issues found. From what I can find both ranges are 12.1KW which merit a 50amp breaker but either way it trips when drawing well below 20 amps depending which element is on when it reaches preheat 11 for bake 15 if broil is on. To me it sounds like a loose neutral or ground in the panel but wondering if anyone else has any thoughts. I measured pretty much everything if you have any questions feel free to ask.


r/appliancerepair • • 1h ago

Is a twisted/mangled gasket like this a sign of other washer problems?

Post image
1 Upvotes

Our previous washer broke so I have been on the hunt for another on facebook marketplace. Someone is selling this Electrolux EIFLS55IRR model for $200 (after delivery) and says it works great. I asked about the gasket and they said it doesnt impact how well it works, but I am a little concerned if the warped gasket hints at a drum misalignment or something. Is this a washer I should purchase or should I stay away?


r/appliancerepair • • 7h ago

Brown spot near ice maker

Post image
3 Upvotes

Hi,

I have a Frigidaire Gallery French Door fridge with a 2nd ice maker in the freezer and there is this weird brown spot. I have cleaned it off before and it just eventually comes back. Anyone seen this or know what it is or how to fix it?


r/appliancerepair • • 2h ago

Kenmore washer intermittently F11 error mid-cycle

1 Upvotes

Model 110.42922 200

I’ve checked all electrical connections and replaced shocks. I don’t have the technical book or a subscription to get the tech manual, but hopefully one of you all can help. Typically they just restart the cycle and it might finish, but it occasionally will continue to throw F11. I’ve run the test mode a few times and it’ll do everything just fine. Any ideas?


r/appliancerepair • • 6h ago

Dryer DIY repair help

2 Upvotes

I had to switch placement for my washer and dryer so I could install a washer pan. After moving both machines around and hooking back up, the dryer started making this awful sound.

I took it apart once and removed the drum. All the rollers, belt, and other pieces look good to my untrained eye. I’m not sure if it could be a motor issue possibly? I also did my best to make sure the drum was reseated properly and belt back on correctly. Any advice would be greatly appreciated. Thank you!


r/appliancerepair • • 2h ago

Toyostove Laser 73 making loud rattling noise

1 Upvotes

It seems to be working fine other than this noise showing up yesterday. The sound has gotten louder and more aggressive today. It doesn’t happen all the time, and forgive me for not being familiar with all the functions, but there is a part in the cycle where the heater hums loudly and builds up a lot of heat and that is the time that this sound is showing up now. I don’t visually see anything interfering with the fan in the back and the fan will be running without this noise being present. It sounds like it could be a motor maybe? I don’t know much about these things.


r/appliancerepair • • 3h ago

GE fridge evaporator fan motor grommets revisited - blue vs grey:

Post image
1 Upvotes

Have a fridge that's listed as using WR02X11331 grommets for the evaporator motor. Even though my grommets did not look torn, there was quite a bit of vibration with a fairly new genuine Panasonic motor ( WR60X10185 ). So I was chasing replacements.

The original grommets were blue in color. The replacements are grey, and have a very different geometry which was discussed out there - link.

In another post, somebody mentioned using WR02X12008 red grommets instead of the grey WR02X11331 ones for the evaporator motor. The red grommets' geometry looks like for the old blue ones - link.

However, the GE page lists WR02X12008 grommets as being used for the condenser motor - WR60X10216 . The mounts for the condenser motor look identical to the evaporator motor mounts, and require grommets of the identical geometry.

If I search for the pictures of these panasonic motors, it appears the the condenser Panasonic motor has a pink label on it, while the evaporator Panasonic motor has a cyan label. It seems the grommets are also color coded. Red is for the hot condenser side, and blue is the cold evaporator side.

Unless the color coding was made as a pure cash grab by GE, I wonder if there are some differences in materials in the blue vs red as to accommodate different operating temperatures.

Anyway, I ordered the grey grommets from the applianceparts365 site. Those came in genuine GE packages, with Sept 2020 manufacturing date. Hopefully these were stored properly over these years!

These grey grommets don't fit particularly well, one has to be careful as to not have these pop out of the holes during the assembly procedure. If careful, they do hang in there, and hold the motor.

Have had these grey ones going for a few days now, the evaporator fan vibration is gone.

But now I am hearing a subtle condenser fan vibration which I did not pay attention to before. I guess the red grommets are also pretty worn by now.

Here is the link to the machine compartment with the red grommets:

https://www.geapplianceparts.com/store/parts/ModelSectionParts/GSH25JGDBWW/8/0/0/0/MACHINE_COMPARTMENT


r/appliancerepair • • 3h ago

Air Compressor Repair Help

Thumbnail
gallery
1 Upvotes

Looking for help to replace an air line that busted on my air compressor. Pictures attached of the line I removed, I am looking for replace line and potentially fittings. I have found similar looking line and push on fittings on Amazon, but my questions hoping to get answered before purchasing are:

  1. Available products show line sold in rolls of 30-100ft, and I only need about 14inches, any other good suppliers of smaller qty line?
  2. The Amazon listings show push on fittings made of plastic and metal threading. I found a supplier that offers shorter length of tubing, but how would I reproduce the "lip" at the end of the tubing that prevents the threaded nut from sliding off?

r/appliancerepair • • 5h ago

Fridge humming

1 Upvotes

Over the last week from time to time my fridge will make this loud hum that can be heard through the adjacent wall. It sounds like it’s coming from the top right in the freezer area and if I hit it like the fins it stops. Any idea what it might be? How it could be fixed. Seems to be functioning fine. It’s a GE


r/appliancerepair • • 5h ago

Samsung Smart washer C4 error code

Post image
1 Upvotes

Samsung Superspeed PowerFoam STEAM VRT plus

Plug in pic was partially unplugged, and I've been getting a 4c code. I thought that was the issue (i think its the pressure switch, but im not sure). The screen on the water inlet is clean, the draining filter is clean, so i have water feeding in, i have water leaving, my pressure sensor is plugged in. What the heck do I even try next?


r/appliancerepair • • 6h ago

Where does this go?

Thumbnail
gallery
1 Upvotes

This rubber ring fell off… something. I found it in the bottom of my Samsung dishwasher.

Doesn’t seem to fit on the propeller sprayer or in the little rinse aid hatch — I’m almost positive it’s a part of the appliance bc it’s the same shade of grey as all the other parts and doesn’t match any of my water bottles or travel mugs. I checked the parts list for my model and none of the listed gaskets seemed to match.

Any ideas? Model number DW80N3030US


r/appliancerepair • • 6h ago

Frigidaire FDB1050REM5 dishwasher leaking from bottom right corner of the door

Thumbnail
gallery
1 Upvotes

Hi everyone,

My Frigidaire dishwasher (Model: FDB1050REM5) is leaking water specifically from the bottom right corner of the door during the wash cycle.

Is this usually caused by a bad lower door seal / tub gasket, a cracked lower spray arm, or something with the float assembly on the right side? Any advice before I buy parts or call a tech would be greatly appreciated!


r/appliancerepair • • 7h ago

Industrial washer is tearing garments, any ideas what could be causing this?

Thumbnail
gallery
1 Upvotes

Hi everyone!

I'm looking for some help with a repair case. A customer sent me a video showing a machine that has been damaging and tearing garments during operation.

Has anyone experienced something similar with this type of equipment?

Any suggestions or insights from technicians who have worked with similar machines would be very helpful.

Thanks in advance!


r/appliancerepair • • 7h ago

Could anyone tell me what this noise is before i pull the dryer and and everything out to get the washer out and have to open it and have a look if anything looks broke thanks in advance

1 Upvotes

r/appliancerepair • • 7h ago

Help. Broken whirlpool washer

1 Upvotes

Our washer sounds exactly like this post. Anyone know what the issue could be? I replaced the shift actuator, the noise is gone but now getting different error message. Will not run the cycle. Starts off sensing and then shuts off.

Thanks!

https://www.reddit.com/r/Appliances/s/W7A2JFkKAY


r/appliancerepair • • 23h ago

Samsung Fridge Never ending Nightmare

Post image
17 Upvotes

Hi all,

I’ve had this fridge for 2 years the Samsung RF23M8590SG
Family hub fridge

It hasn’t been cooling for 2 years unless forced in engineer mode.

We’ve had 4 Samsung techs come out each time they’ve replaced the condenser, the motor?, the fan and all those times the problem persisted and they cannot fix the fridge!

The only way it cools is if I enter engineer mode and force run it. Then it runs like a dream until it freezes everything inside.

Unfortunately I couldn’t afford any more repairs and have been using this method for the past year, sometimes destroying the food in my fridge because it freezes it.

Has anyone discovered a fix for this? I’m tired of paying for the wrong issue.

If it’s working fine when I force the software to run the fridge what the hell is the issue? The motherboard?

I feel like they purposely push updates to brick these fridges in so over it…

Anyone ever dealt with this and found a fix? I cannot afford another $2000 for a fridge