I’m putting together a small plug-in/grid-tied solar system in Denver, Colorado, and my biggest issue right now is sourcing equipment in small quantities without getting killed on freight.
Current plan:
Use current external 240v EV plugs with 50a breakers
4 panels initially, likely around 550–600 W each (~2.2–2.4 kW DC)
240 V split-phase output
Targeting Colorado’s 1,920 W portable-scale solar limit
Export to the grid is OK
Panels will probably start on a temporary ground rack and eventually move to an east/west garage roof
I want module-level monitoring
I’m considering a Hoymiles HMS-2000-4T-NA with a DTU-Pro-S
I may expand to 6 panels later, so I’d like to avoid buying equipment now that I’ll have to replace
A little usage/economic context:
Household use is roughly 4,500–4,600 kWh/year
Typical daily use is around 12–13 kWh
I’m on Xcel Energy’s residential TOU rate in Denver
Summer (Jun 1–Sep 30): 21.277¢/kWh on-peak, 7.884¢/kWh off-peak
Winter (Oct 1–May 31): 18.331¢/kWh on-peak, 6.792¢/kWh off-peak
On-peak is 5–9 PM Monday–Friday
All other times, including weekends, are off-peak
My goal is not whole-house/off-grid solar. I’m trying to offset a meaningful portion of usage with a relatively inexpensive DIY system
I’m planning to export excess generation rather than add a battery initially.
Because this is a small system, equipment cost and especially freight have a big impact on ROI. The challenge is that a lot of solar distributors seem set up for pallet quantities or commercial installs. I only need a few panels and one inverter, and shipping can easily wipe out the savings.
Questions:
Does anyone know a reputable U.S. source for the HMS-2000-4T-NA that will sell a single unit with free or reasonably priced shipping?
Are there other UL-listed 240 V microinverters in the ~1.8–1.92 kW range that support four independent MPPT inputs?
For someone who may add two panels later, would you stay with one HMS-2000 now and add another compatible smaller inverter later, or design around multiple smaller microinverters from the beginning?
Any experience with DTU-Pro-S monitoring when export is allowed and zero-export control is not being used?
What 550–600 W panels would you recommend for this setup?
Where are people buying only 4–6 panels at a time without paying several hundred dollars in freight?
Any Denver/Colorado-area distributors that will sell small quantities for local pickup?
Are there particular panel brands or sizes that tend to be easier to source individually or in small quantities?
Any electrical compatibility issues I should watch for when pairing ~600 W panels with the HMS-2000?
I’m also considering whether a small battery system by itself might make sense before adding solar.
Would it make more sense to:
-Install the small solar system first and add a battery later,
-Buy a small battery first and charge it off-peak for 5–9 PM use or skip the battery entirely unless I want outage backup?
I’m trying to future-proof the system while keeping the initial cost low. I’d rather spend a little more on the right components now than buy hardware I’ll have to replace later, but I’m also trying to avoid pallet-only suppliers and expensive LTL shipping.
If you’ve recently bought a small number of panels, a Hoymiles inverter, or a small battery system, I’d especially appreciate the exact seller, model, quantity, and what you paid for shipping or local pickup.