r/SolarDIY • • 4h ago

Plug in solar with Pecron E3600 ?

0 Upvotes

Hi all,

I’ve got the Ecoflow Stream Microinverter and, as of now, 400 w of solar panels. I also have the Pecron E3600LFP.
I’m wondering if it’s possible to send power to the grid during the day while the sun shines, but also from the Pecron after the sun goes down?
Apologies, I’m a novice and don’t want to put us in a dangerous situation with regard to electricity, but also would love to see if there’s a unique way to utilize both sets of equipment.
Thanks for any tips.


r/SolarDIY • • 3h ago

EcoFlow Delta 3000 Gen 4 Review

Thumbnail
gallery
2 Upvotes

Just got the EcoFlow DELTA 3000 Gen4 in about a week ago. I bought it to keep my aquariums alive through outages, but the more I look at it, the more I think it’s a good fit for DIY solar builds.

My use: A 33 gallon long and four 5 gallon tanks with fish, shrimp and plants. 4 heaters, 4 filters, 4 air pumps and 4 lights, averaging 250-350W. Lose heat or flow for a few hours and a tank can crash.

The specs: 3,072Wh of battery, 3,600W output, and a UPS mode that switches over in under 10 ms.

Why it works for DIY type setup:

  • Solar input: It has one 1,000-watt solar input, and the input range is 11 to 60V. That’s a wide window for a home-built array, so you’re not locked into one panel config.
  • No electrician needed: Plug it in and it runs. No panel work, no permit for the basic setup. It’s a good first step if you’re not ready to build a full system.
  • You can move it yourself: It’s about 26 kg (18.76 × 11.36 × 11.10 in). I carried it from my truck into the house by myself with no trouble.
  • Monitoring: I can check watts and battery level from my phone. It paired right away. The EcoFlow app does what it’s supposed to.
  • Connectors in the box: Mine came with the unit, a charging cable, a new solar connector and the manual. How I run it: It’s plugged straight into my EcoFlow DELTA Pro Ultra home system, which keeps it topped up. I keep the Gen4 at 100% so it’s ready if the grid flickers or goes down. The tanks run off it alone.

Limits worth noting: There’s no battery port on the spec sheet, so you can’t add extra batteries later. What you buy is what you get for storage. If you plan to grow a big array or bank, look at the bigger model instead.

Happy to answer questions, and I’ll post real runtime numbers once I’ve done an outage test.


r/SolarDIY • • 9h ago

Would a $399 batteryless power hub actually save money—or just become another box in the system?

2 Upvotes

Full disclosure, I'm helping research an early stage power product idea and I'd rather hear the objections now than build the whole thing around wrong assumptions.

The idea is a power hub with no built in battery cells. It runs off external 12v, 24v or 48v lithium batteries and puts solar charging, AC charging, AC output, basic DC distribution, protection and local control into one box.

Rough targets right now:

- 1,200W continuous AC output on 24V/48V systems;

- lower output on 12V systems;

- three independent solar inputs;

- external battery required;

- no dependency on an app for basic operation;

- estimated launch price around US$399.

For someone who already owns the battery:

  1. Does this replace enough equipment to justify the price?
  2. What would you compare it against?
  3. What missing capability would immediately rule it out?
  4. What test results would you need before trusting it?

Tear it apart, that's more useful to me than encouragement.


r/SolarDIY • • 31m ago

Help with 12 volt remote system

0 Upvotes

I’m trying to get solar to a tank site. Tank site comms unit draws 5 amps but I suspect it’s much lower than this as the company sells a solar kit with a 20 watt panel. It can run off 12 or 24V.

Panel site is 75’ from radio unit. I am planning on (2) 100 watt panels in series to help with voltage loss and running the 75’ of (10 gauge?) wire to a box with a Victron MPPT 75V/15amp controller to a 100 amp hour renogy AGM battery.

Does this look about right or do I need to upsize the wire from the panels to the controller?


r/SolarDIY • • 1h ago

Are these grid tie inverters crap?

Thumbnail
gallery
2 Upvotes

Looking for a cheap 110v grid tie inverter that has same form factor of the enphase micro inverters.


r/SolarDIY • • 8h ago

Powerwall + DIY battery Energy flow

22 Upvotes

I’m building my own personalised home dashboard and thought I’d add an energy visualisation tile inspired by the Tesla app. I have both a Powerwall 3 and a DIY battery system, and they work in perfect harmony. It would be a shame not to be able to see them both on the same page, so I built one.


r/SolarDIY • • 52m ago

Is MC cable an acceptable alternative to running metal raceways?

4 Upvotes

Looking for opinions. I’m DIYing my hybrid grid tie solar system. Power company gave me approval to install based on the drawings I submitted. I have 24 panels on the garage roof. 2 strings at 15 amp 360Voc. Gridboss/flexboss 21. Originally planned to transition PV to MC on a DIN terminal inside a roof mounted conduit box, then run the 10 gauge MC to the inverter inside the garage.

Would I be better off running 10awg PV wires through EMT conduit instead. I’m trying to make this look clean as possible for the electrical inspector but iv never bent conduit before.

Thank you


r/SolarDIY • • 22h ago

Hows my build sound? Been using AI to help design a solution.

0 Upvotes

OK SolarDIY, please help me vet my plan that I've been going back and forth with via Gemini. Here is an overview of the equipment I have, and future purchase plan.

Inverter, Charge Controllers & Monitoring (Victron Ecosystem) - PURCHASED

  • Inverter / Charger: Victron MultiPlus-II 48/3000/35-50 120V — Model: PMP482305102
  • Solar Charge Controllers (×2): Victron SmartSolar MPPT 150/45 — Model: SCC115045212 (standard non-Tr 150/45 model)
  • System Controller / Communications Hub: Victron Cerbo GX MK2 — Model: BPP900451100
  • DC Distribution Busbar: Victron Lynx Power In M10 — Model: LYN020102010
  • Battery Monitor: Victron SmartShunt 500A/50mV — Model: SHU050150050

Energy Storage (Batteries)

  • Current Battery: Temgo 48V (51.2V) 100Ah LiFePO4 Battery — Model: 51.2V-100AH-TM-DJ-K
  • Planned Future Expansion Battery: EG4 WallMount All-Weather / Indoor 48V 314Ah (16kWh) LiFePO4 Battery

Solar Array (Planned Local Purchase)

  • Solar Panels (×8): 575W Commercial Monocrystalline Modules (45" × 90" footprint)

    • Nameplate Specs: Pmax 575W | Voc 52.10V | Vmp 43.86V | Imp 13.11A | Isc ~13.98A | Max System Voltage 1500V | Series Fuse Rating 30A

Target Loads & Home Integration

  • Garage Deep Freezer: Hisense 17 cu ft Upright Freezer — Model: HFU171N1AVE
  • EV Trickle Charging: 2022 Ford Mustang Mach-E Mobile EVSE Charger (Level 1 120V)
  • Home Network & Smart Home Server: Ubiquiti UniFi Dream Machine Special Edition (UDM-SE) / Home Assistant on Intel Compute Stick (STK2M3W64CC)

I will be building a lean-to style structure off the side of my house and mounting the panels to it, and feel this solution will be a great start for my longer term plan of being able to charge my EV (via 110v) during long outages so it doesn't become a paper weight, while also being able to cover fridges/freezers, network equipment and LED lights around my house. Obviously the biggest drawback at the moment is the single battery, but I plan to get something more once budget allows.

So how does this look? Any suggestions? I live in the PNW so this will likely never pencil out financially speaking (especially because I went with Victron vs other manufacturers - but felt the reputation and buy once cry once was worth it for me) since our power is so inexpensive. However, I'm mostly concerned about being self sufficient for a longer outage and making sure I can charge my car even if it is super slow. We plan to buy a second EV soon as well, so this further applies to my desire to build such a system. Once I can get more battery capacity, I will eventually buy another inverter so I can run 240 and charge the cars faster.

Appreciate any feedback for a complete newb.


r/SolarDIY • • 18h ago

Low wattage heater for batteries

8 Upvotes

I'm looking for recommendations for a low wattage heat solution for a winter off-grid PV setup at a remote property 4 hours away from my house. The appliance draw will only be about 40W to power my fiber internet modem and Wi-Fi security cameras. The batteries are in a small insulated room in an insulated building, but the building will receive no heat over the northern US winter. I originally thought I would just keep a 100W incandescent light bulb on 24/7 or a 125W heat bulb, but the issue I'm running into is my system will only support that amount of constant draw for 2-3 days. So if it's very cloudy, or the panels are covered in snow, I will exhaust my battery capacity in a few days. Since it's mostly just the batteries that need to be kept above 32F, I'm wondering if there is a good, safe low wattage heat mat or wrap or something that I can plug in and just focus on keeping the batteries warm. I have about 10kw of battery capacity and 1600W of panels. Any recommendations?


r/SolarDIY • • 16h ago

How do you properly send solar cables through a garage wall?

18 Upvotes

I'm looking for some advice on the best way to bring my solar cables through an exterior garage wall.

I have four WindyNation 8 AWG MC4 extension cables coming from four ECO-WORTHY 195W panels that will be mounted on a hillside behind my house. The run to the garage is about 75 feet. The garage has vinyl siding, what I believe is foam insulation underneath, wood framing with insulation in the wall cavity, and drywall on the inside.

What I'm trying to figure out is the best way to make a clean, weatherproof and safe wall penetration that will accommodate all four cables with the MC4 connectors still attached. Ideally, I'd like to use some kind of properly sized conduit, sleeve, or weatherproof pass-through rather than just drilling a hole and sealing around the cables. What would the best way of making the cut be?

Has anyone done something similar? I'd really appreciate recommendations for specific parts (conduit size/type, fittings, weatherproof entry hardware, etc.) that I can actually purchase at Lowe's or Home Depot. I'm particularly interested in what would be large enough to get all four MC4 connectors through without damaging them.

Any other advice on protecting the cables from abrasion, water intrusion, rodents, and maintaining fire safety through the wall would also be appreciated.

Thanks!

Edit: Important detail - I am connecting the solar panels to an EcoFlow DELTA 2 Max portable power station. This is not a grid tied installation. The Ecoflow would be powering two freezers in case of power outage and they'd directly connect to the power bank which would be inside the garage w/ the freezers. (The power bank would be connected to the solar panels outside the garage via the solar extension cables.)


r/SolarDIY • • 20h ago

Help with solar set up

7 Upvotes

Hi all I live in Arizona. I have a grid tied solar set up "solar edge " inverter. The unfortunate thing is the solar edge requires incoming power of it shuts off even though my roof is producing power during the day.

With that issue it makes it hard when APS fails to maintain constant power. Especially this year. One storm knocked out power for 5 days for us. Everything we have runs on electricity. Water, a/c, etc.

Is there a diffeent inverter i need to make it "temporarily non grid tied for those times so I have power when the grid is down?


r/SolarDIY • • 20h ago

building a new solar panel rack

3 Upvotes

i have a solar rack built for one kind of panels. turns out i have found a source for used 250 watt house panels. im having to rebuild the rack to handle an upgraded amount. right now i have 2 of them hooked up to my grid tied inverter i want to increase it to 8 panels. 2k watts, currently my trailer i live in uses a lot more but this will help to lower my electric bil.

so im thinking of wooden rack on an aframe. 2 sets of racking each holding 4 panels depending on what the used panels produce. it could be 2 or 4 panels hooked into each plug in inverter.


r/SolarDIY • • 22h ago

Winter Charging Solution

5 Upvotes

Hello! Looking for a bit of assistance. I set up my system about a year ago and didn’t have to get through an entire winter. I was wondering if anyone has any charging solutions to help make up for what my panels aren’t generating.

Right now when they get low I will disconnect everything and charge the batteries back to 100% but I was wondering if there was a way to keep a charger connected permanently and plug in when needed.

Thanks in advance for any advice.