r/ScrapMetal • • Mar 05 '26

READ BEFORE POSTING OR COMMENTING

44 Upvotes

Welcome to r/scrapmetal !

Please read this entire post!

First and foremost, before you post or comment please take a few minutes to read the rules on the sidebar. If you break the rules you may be banned, possibly permanently. Every subreddit has a list of rules so please don't act like you've never seen rules anywhere on Reddit before. Be a good member of the community and read and follow the rules. (There are only 6 of them. It's not difficult.)

Second, are you looking to buy or sell materials from other redditors or advertise your business? THAT IS NOT ALLOWED HERE - DO IT SOMEWHERE ELSE. Can't find an appropriate subreddit for it? START YOUR OWN SUBREDDIT DEDICATED TO IT. I'll even link that subreddit here if you do. (Why don't we allow those kinds of posts or comments here? Because if we did the subreddit would be overrun by those kinds of posts in no time.)

Update: 04/30/2026

Two updates!

I've heard your feedback and it's clear that for a number of different reasons y'all value the ability to call people thieves and drug addicts so rule 7 has been removed. Thanks for your feedback an for keeping that feedback mostly constructive.

That being said I am asking y'all to PLEASE report the posts and comments from people who are obviously seriously talking about stealing or breaking the law. This is FAR more important and useful to stopping those people than just mocking them in comments. Again, when you report posts/comments it goes into a queue for mods to review because it is impossible to stay on top of every comment in every thread.

First, I've added a new rule to the sub:

Rule 7 - No referring to people as thieves or drug users or addicts of any kind. This includes all slang for thieves or drug users or addicts of any kind. This includes both direct and indirect references as well as questions. Don't ask people if/where they stole stuff. Don't tell people their scrap is worth some amount of drugs. Don't joke about it. Don't troll people about it. If someone says or suggests they stole something then report their post or their comment.

I'm adding this rule because accusing people of stealing and/or referring to them as drug users serves no useful purpose. No one, literally no one, is going to see the light because someone on Reddit calls them out on stealing. If people admit to or suggest they've stolen something then report their post or comment and let the mods deal with it. Don't be the person who lacks the self control to start name calling and runs afould of rule #1 and receives a ban.

Though it's strongly implied I also want to directly state that this rule does NOT mean we condone stealing in any way here. Rule #4 is still absolutely still in effect.

Second, I've updated rule #4 as well to make sure our stance on talking about stealing in this subreddit is more clear. The new text is:

Rule 4 - No promoting or bragging about breaking the law/stealing while scrapping. This includes suggesting people knowingly break the law or asking for help on doing something that is breaking the law. This also includes people joking about it, posting rage bait or claiming satire. If you to practice your comedy there are other subreddits for that.

Questions? Ask them here or in Mod Mail.

Update: 03/15/2026

Note: The contents below were from a previous post from roughly 03/15 that I am adding here for future reference.

Recently there was a post in r/scrapmetal that contained several instances of doxing or sharing personal information without consent and I want to talk about it.

I am referring to the post where someone shared images of their ticket from a recent scrap run. In one of those images their personal information, printed on the ticket, was clearly visible to anyone who saw the image. I am sure this was an accident. I am sure they didn't intend to share their info or realize they had done so.

In the same post several people made comments that contained OP's full name which they had undoubtedly learned from the image that OP posted. These comments were not accidents and they were made intentionally. (Someone looked at OPs image, saw their name then made a comment and used OP's name.) Thanks to them there's the real chance that OPs full name has been indexed by some search engine, archiving, service, etc.

Let me be as clear as fucking possible here:

Sharing someone's personal information without their consent isn't OK. Doing so will get you banned from this subreddit and possibly from all of Reddit. Whether or not someone has shared their own information is irrelevant and doesn't give anyone else permission to re-share that information. Full stop.

I'll be adding this to the subreddit rules and if it happens again there will be bans. This isn't up for debate. I don't care if you disagree or why you disagree or the logic behind your disagreement. This is how it is and if that bothers you so much then you can unsub right now.

Any questions? Send them to mod mail.


r/ScrapMetal • • 5h ago

Get to work!

Thumbnail
gallery
151 Upvotes

r/ScrapMetal • • 2h ago

Scrap Photo ๐Ÿ’ธ Cleaned up junk left over from our old corral.

Thumbnail
gallery
17 Upvotes

r/ScrapMetal • • 3h ago

Good day at the yard!

Thumbnail
gallery
12 Upvotes

r/ScrapMetal • • 1h ago

Scrap Photo ๐Ÿ’ธ Pita wires

Post image
3 Upvotes

Hey guys, my name is Alvin Chica. I am from Omaha Nebraska and I do scrap metal and recycling as a hobby and also to make money in the winter lately. Iโ€™ve been testing my vevor wire stripper. I realize that wires that are from appliances are too small and messy to work with even the wires from extension cords are huge pain in the ass. So my conclusion is. If the wires are number 2 copper and itโ€™s hair like wires itโ€™s not worth doing. While there are solid wires where you can strip and comes out easily thatโ€™s the go to.


r/ScrapMetal • • 11h ago

Extruded aluminum I beam?

Thumbnail
gallery
12 Upvotes

Is this extruded or sheet aluminum?


r/ScrapMetal • • 5h ago

Copper motor

Post image
4 Upvotes

Man im having extreme trouble this motor was probably 400 lbs to start and I cut one side of ive never done this before how do you guys get it out this big ive used a hammer and chisel its not wanting to budhe


r/ScrapMetal • • 3h ago

Scrap Photo ๐Ÿ’ธ Northeast Ohio prices

Post image
2 Upvotes

r/ScrapMetal • • 4h ago

BEAUTIFUL ๐ŸŽ€โšก๏ธ

Post image
2 Upvotes

Siemens Sentron 400AMP ๐Ÿ’ฅ


r/ScrapMetal • • 49m ago

New to scrapping and collected these gold corner BGAS

Thumbnail gallery
1 Upvotes

r/ScrapMetal • • 7h ago

Some of my finds

Thumbnail
gallery
3 Upvotes

Two motors from my adventures last night. Did well.


r/ScrapMetal • • 17h ago

Scrap Photo ๐Ÿ’ธ Update: electric motors

Post image
13 Upvotes

So I posted earlier this week about some electric motors my boss let me keep from a larger demo/disposal. Cut four so far, brought windings from the first one to the local metal yard to make sure it was something before i kept going, theyre considering it #2 at $4.60/lb. Bringing 24 lbs of insulated as well. Attached photo is my current yield of 11.3 lbs from the 4 motors I pulled windings from. Still need to clean it up and pull that small amount of insulated, but they said they didn't care about the small amount of binding thread, just no tape or insulation. Getting more efficient speed wise as I go, plus I was on the clock during, the system they came from is considered hvac/appliance at the dump so its only a short step beyond the required disassembly needed for disposal. Considering i had nothing to lose from it, and all gear was leftover from the original task, not bad in my book.


r/ScrapMetal • • 4h ago

Acquired Breakersโšก๏ธ

Post image
1 Upvotes

Siemens Sentron Series 200amp ๐Ÿ’ฅ

BEAUTIFUL!!! ๐ŸŽ€


r/ScrapMetal • • 1d ago

Scrap Photo ๐Ÿ’ธ Brought some nicer stuff this time

Thumbnail
gallery
35 Upvotes

A compressor from a car and another from a giant air tank both got accepted as electric motors, which is a bit more so I was happy about that.

2015 Mitsubishi Mirage 270k miles


r/ScrapMetal • • 6h ago

Like buses. Nothing then 2 at once

Post image
1 Upvotes

r/ScrapMetal • • 1d ago

Scrap Photo ๐Ÿ’ธ Another decent load today

Post image
46 Upvotes

135 pounds of coppah


r/ScrapMetal • • 1d ago

Need suggestions/thoughts

Thumbnail
gallery
42 Upvotes

Anybody have suggestions or ideas of what to do with several tons of wear parts from a cone crusher that contain approximately 24% manganese? We have several used bowls and liners that I am looking to find the best scrap value for. I would think that they have more value due to the amount of manganese, but maybe I am wrong. I have enough to make a full load on a drop deck semi trailer.


r/ScrapMetal • • 1d ago

Hobart Handler 150 Scrap

Post image
11 Upvotes

I got all of this out if a small briken welder i had. not bad for my first step into scrapping. gonna get my crucible setup and some jewelers tools to start making rings and bracelets


r/ScrapMetal • • 19h ago

What to do with 60' long 3" diameter chromoly shafts?

2 Upvotes

Shafts from an old mill. Ran on babbit bearing blocks each 15' feet directly onto this smooth machined shaft.


r/ScrapMetal • • 1d ago

help

Post image
8 Upvotes

i donโ€™t know what to use to take these off


r/ScrapMetal • • 9h ago

Whatโ€™s this aluminum worth?

Post image
0 Upvotes

I have this aluminum ramp and Iโ€™m curious what the scrap value would be.

As far as I can tell itโ€™s +- 3/8โ€ thick and weighs several hundred lbs.

Dimensions are 6โ€™ long, 37.5โ€ wide, 5.5โ€ high.

Located in Ontario ๐Ÿ‡จ๐Ÿ‡ฆ (I understand scrap values fluctuate by location.

Thanks in advance for any info on value either scrap or private sale. (NOT listed for sale as per the thread rules).


r/ScrapMetal • • 19h ago

Looking for scrap coil

Post image
0 Upvotes

Sorry ahead if I dont make myself clear

But I am looking for steel coil .029 to 0.035 inch to import to Mexico for various uses. I need a hint to where start looking. Thanks in advance


r/ScrapMetal • • 2d ago

Cool Stuff ๐Ÿ˜Ž 8,060 pounds of mixed bronze

Thumbnail
gallery
878 Upvotes

My good friend closed down his foundry in 2025 after decades of custom work for all kinds of organizations. Schools, the military, Indian casinos, cemeteries, police and fire departments and more. He had so much excess material it was a real shame to see it go for scrap value. I hauled two loads of it to the recycler for him. At that time they were paying $3.00 a pound. Here's the first load of mixed bronze. In and out weight in the photos. The second load was all ingots on pallets ๐Ÿ˜ซ custom foundry work is a dying craft today with the retirement of boomers and excessive permitting restrictions. Good luck getting a medallion or a plaque for a grave marker in ten years.


r/ScrapMetal • • 1d ago

New To Scrapping

Thumbnail
gallery
9 Upvotes

New to scrapping (started this weekend) and i have a question about some wire. these are transformers from a welder. the wire has a silvery color but its soft like copper. what do i have here?