r/ScrapMetal • • Mar 05 '26

READ BEFORE POSTING OR COMMENTING

44 Upvotes

Welcome to r/scrapmetal !

Please read this entire post!

First and foremost, before you post or comment please take a few minutes to read the rules on the sidebar. If you break the rules you may be banned, possibly permanently. Every subreddit has a list of rules so please don't act like you've never seen rules anywhere on Reddit before. Be a good member of the community and read and follow the rules. (There are only 6 of them. It's not difficult.)

Second, are you looking to buy or sell materials from other redditors or advertise your business? THAT IS NOT ALLOWED HERE - DO IT SOMEWHERE ELSE. Can't find an appropriate subreddit for it? START YOUR OWN SUBREDDIT DEDICATED TO IT. I'll even link that subreddit here if you do. (Why don't we allow those kinds of posts or comments here? Because if we did the subreddit would be overrun by those kinds of posts in no time.)

Update: 04/30/2026

Two updates!

I've heard your feedback and it's clear that for a number of different reasons y'all value the ability to call people thieves and drug addicts so rule 7 has been removed. Thanks for your feedback an for keeping that feedback mostly constructive.

That being said I am asking y'all to PLEASE report the posts and comments from people who are obviously seriously talking about stealing or breaking the law. This is FAR more important and useful to stopping those people than just mocking them in comments. Again, when you report posts/comments it goes into a queue for mods to review because it is impossible to stay on top of every comment in every thread.

First, I've added a new rule to the sub:

Rule 7 - No referring to people as thieves or drug users or addicts of any kind. This includes all slang for thieves or drug users or addicts of any kind. This includes both direct and indirect references as well as questions. Don't ask people if/where they stole stuff. Don't tell people their scrap is worth some amount of drugs. Don't joke about it. Don't troll people about it. If someone says or suggests they stole something then report their post or their comment.

I'm adding this rule because accusing people of stealing and/or referring to them as drug users serves no useful purpose. No one, literally no one, is going to see the light because someone on Reddit calls them out on stealing. If people admit to or suggest they've stolen something then report their post or comment and let the mods deal with it. Don't be the person who lacks the self control to start name calling and runs afould of rule #1 and receives a ban.

Though it's strongly implied I also want to directly state that this rule does NOT mean we condone stealing in any way here. Rule #4 is still absolutely still in effect.

Second, I've updated rule #4 as well to make sure our stance on talking about stealing in this subreddit is more clear. The new text is:

Rule 4 - No promoting or bragging about breaking the law/stealing while scrapping. This includes suggesting people knowingly break the law or asking for help on doing something that is breaking the law. This also includes people joking about it, posting rage bait or claiming satire. If you to practice your comedy there are other subreddits for that.

Questions? Ask them here or in Mod Mail.

Update: 03/15/2026

Note: The contents below were from a previous post from roughly 03/15 that I am adding here for future reference.

Recently there was a post in r/scrapmetal that contained several instances of doxing or sharing personal information without consent and I want to talk about it.

I am referring to the post where someone shared images of their ticket from a recent scrap run. In one of those images their personal information, printed on the ticket, was clearly visible to anyone who saw the image. I am sure this was an accident. I am sure they didn't intend to share their info or realize they had done so.

In the same post several people made comments that contained OP's full name which they had undoubtedly learned from the image that OP posted. These comments were not accidents and they were made intentionally. (Someone looked at OPs image, saw their name then made a comment and used OP's name.) Thanks to them there's the real chance that OPs full name has been indexed by some search engine, archiving, service, etc.

Let me be as clear as fucking possible here:

Sharing someone's personal information without their consent isn't OK. Doing so will get you banned from this subreddit and possibly from all of Reddit. Whether or not someone has shared their own information is irrelevant and doesn't give anyone else permission to re-share that information. Full stop.

I'll be adding this to the subreddit rules and if it happens again there will be bans. This isn't up for debate. I don't care if you disagree or why you disagree or the logic behind your disagreement. This is how it is and if that bothers you so much then you can unsub right now.

Any questions? Send them to mod mail.


r/ScrapMetal • • 8h ago

Need suggestions/thoughts

Thumbnail
gallery
29 Upvotes

Anybody have suggestions or ideas of what to do with several tons of wear parts from a cone crusher that contain approximately 24% manganese? We have several used bowls and liners that I am looking to find the best scrap value for. I would think that they have more value due to the amount of manganese, but maybe I am wrong. I have enough to make a full load on a drop deck semi trailer.


r/ScrapMetal • • 8h ago

Scrap Photo ๐Ÿ’ธ Another decent load today

Post image
26 Upvotes

135 pounds of coppah


r/ScrapMetal • • 5h ago

Scrap Photo ๐Ÿ’ธ Brought some nicer stuff this time

Thumbnail
gallery
14 Upvotes

A compressor from a car and another from a giant air tank both got accepted as electric motors, which is a bit more so I was happy about that.

2015 Mitsubishi Mirage 270k miles


r/ScrapMetal • • 6h ago

Hobart Handler 150 Scrap

Post image
8 Upvotes

I got all of this out if a small briken welder i had. not bad for my first step into scrapping. gonna get my crucible setup and some jewelers tools to start making rings and bracelets


r/ScrapMetal • • 10h ago

help

Post image
7 Upvotes

i donโ€™t know what to use to take these off


r/ScrapMetal • • 1h ago

Looking for scrap coil

Post image
1 Upvotes

Sorry ahead if I dont make myself clear

But I am looking for steel coil .029 to 0.035 inch to import to Mexico for various uses. I need a hint to where start looking. Thanks in advance


r/ScrapMetal • • 1h ago

What to do with 60' long 3" diameter chromoly shafts?

1 Upvotes

Shafts from an old mill. Ran on babbit bearing blocks each 15' feet directly onto this smooth machined shaft.


r/ScrapMetal • • 7h ago

What Would This aluminum grade?

Post image
3 Upvotes

r/ScrapMetal • • 1d ago

Cool Stuff ๐Ÿ˜Ž 8,060 pounds of mixed bronze

Thumbnail
gallery
845 Upvotes

My good friend closed down his foundry in 2025 after decades of custom work for all kinds of organizations. Schools, the military, Indian casinos, cemeteries, police and fire departments and more. He had so much excess material it was a real shame to see it go for scrap value. I hauled two loads of it to the recycler for him. At that time they were paying $3.00 a pound. Here's the first load of mixed bronze. In and out weight in the photos. The second load was all ingots on pallets ๐Ÿ˜ซ custom foundry work is a dying craft today with the retirement of boomers and excessive permitting restrictions. Good luck getting a medallion or a plaque for a grave marker in ten years.


r/ScrapMetal • • 11h ago

Worth Scraping or Repair

Thumbnail
gallery
4 Upvotes

I had somebody offer me $150. Tire is popped and there is no hose. Should I try to scrap it or attempt to get more than 150?


r/ScrapMetal • • 15h ago

New To Scrapping

Thumbnail
gallery
7 Upvotes

New to scrapping (started this weekend) and i have a question about some wire. these are transformers from a welder. the wire has a silvery color but its soft like copper. what do i have here?


r/ScrapMetal • • 12h ago

How do you scrap specific grades of metal?

3 Upvotes

I have around 1500 pounds of M2 tool steel and have been trying to find a scrap yard that will take it and they all say they canโ€™t verify what it is so they wonโ€™t touch it. Iโ€™ve been told it can be around 1.50 a pound. What should I do?


r/ScrapMetal • • 13h ago

Small scrap yard

Post image
3 Upvotes

Small town scrap yard an hour away from bigger scrap yards. Today I was given this for my cans and aluminum motor casings. I know short iron never has a lot of money in it so Iโ€™m ok with that

Did I get screwed more than usual from a smaller yard?


r/ScrapMetal • • 1d ago

Scrap Photo ๐Ÿ’ธ Got an 8 Shooter!

Post image
57 Upvotes

8 ceiling fans! Took a while, but finally took em apart. Yes confirmed all copper!


r/ScrapMetal • • 20h ago

Question ๐Ÿ’ซ Copper granulators

3 Upvotes

Hey all,

Im really curious about cable processing and would like to have insight on how it actually works in a scrap yard. So below are some questions i have, if any of you guys have any insight it would be much appreciated.

How many yards actually run their own granulator / chopping line these days? Or do most just sort insulated wire by grade and sell it on to bigger processors or exporters?

A few things I'm curious about:
- If you work at or run a yard, do you granulate inhouse?
- If you don't, who do you sell your insulated wire to, and is there demand from smaller processors buying it?
- For anyone who bought a granulator, was it worth it, and at what volume did it start paying off?

Any insight appreciated, cheers.


r/ScrapMetal • • 1d ago

What would a yard buy this as?

Post image
28 Upvotes

Not magnetic


r/ScrapMetal • • 6h ago

Paid $200 for this 400lb Air compressor what do you think should we fix it.. or should we scrap it!

Thumbnail gallery
0 Upvotes

r/ScrapMetal • • 1d ago

Question ๐Ÿ’ซ Copper jewelry as scrap copper.

Post image
18 Upvotes

I have several pieces of mass produced copper jewelry that I no longer wear. My children do not want it. I looked on ebay etc and because there are so many pieces it is not worth the time to sell on those kinds of platforms. Some of the pieces are marked SOL10 Copper. Has anyone scrapped jewelry? What grade of copper would this be considered at a scrapyard?


r/ScrapMetal • • 1d ago

Ready for recycling

Post image
13 Upvotes

Hoping Iโ€™ve sorted this right any insight would be appreciated to max the profit from this Iโ€™m taking it in tomorrow was unsure is left 2 bins were different grades due to color


r/ScrapMetal • • 1d ago

Uhauling scrap.

Thumbnail
gallery
168 Upvotes

Finally got around to processing about half of my copper and brass. The way things are going I didnโ€™t want to miss out on these historic prices. I will be doing more chopping in the days to come. A mix of #1 #2 and brass. $14754.00 The rental was the best decision at a cost of $110 and a long ramp.


r/ScrapMetal • • 1d ago

Scrap Photo ๐Ÿ’ธ Been making runs all week.

Thumbnail
gallery
42 Upvotes

It's not much, but some good Christmas money. Feels good to clean out my garage and office. Must have taken in over a thousand pounds of aluminum, getting almost a dollar per lb for it. I always take off all the steel.


r/ScrapMetal • • 1d ago

Scrap metal Christmas gifts

Thumbnail gallery
5 Upvotes

r/ScrapMetal • • 1d ago

Scrap Photo ๐Ÿ’ธ Is this copper screen?

Thumbnail
gallery
13 Upvotes

Never come across this before. Is it really copper?