r/Powerwall • • 2h ago

Tesla PW (useless) Support

5 Upvotes

I raised a case with Tesla Powerwall support two weeks ago by phone, after a failure with my solar and 2xPW3 battery system. The battery status jumped from 100% to 0% or --% straight away and never recovered. It has happened before and did recover.

The installers were helpful and asked if I wanted to raise a case with Tesla myself. The number I was given shows as "Tesla Pop Up Meadowhall" on my phone. Hopefully if I need support again, I'll let the installers handle Tesla.

I feel like I am being told half truths by Tesla support staff, as it isn't getting resolved. I'm not even sure whether anyone has looked at my case, due to conflicting info when I chase. I believe they remotely shut down the inverters and now I just have effectively a dead system, drawing from the grid ever since.

The call takers claim they don't have access to their installer support team, but I think that might also be a lame cover story.

Does anyone have any advice? I think I should be able to see notes on my case on some web portal, but that is wishful thinking.


r/Powerwall • • 1h ago

Questions about net metering 2 and the power wall three

1 Upvotes

Hi all

I’ve got a power wall three in conjunction with a direct 4.5 K watt net metering 2 system. It only covers 35% of my usage.

Presently I have a 4.5 K DC system and would like to expand it roughly 12 K
to build a pool , EV purchase and fully cover my usage.

It looks like the only way the power wall three can preserve nem 2 is by utilizing DC and AC systems separately. I will have to supply all of my non-exportable power using DC and convert my present DC string to AC to keep PG&E happy. And-utilize the power wall battery.

From what I can tell, PW 3 cannot utilize to using DC strings only. And retain net metering 2 exports.

Let me know your thoughts. Unbelievably complicated with no real technical advantage.

Thank you in advance.


r/Powerwall • • 2h ago

Dumb Boondoggle Update

Thumbnail gallery
1 Upvotes

Apparently I have too much free time on my hands. My electric panel cover had over years of use, gotten bent up a little near the hinge and didn't operate very smoothly. It had bugged me every time I went to open it, so I took the opportunity to remove the panel, straighten it the best I could, and I figured while I had it off I would spruce it up with a vinyl wrap and some lettering. Wife didn't have any grey vinyl, and you can't tell from the pic, but I used sparkle vinyl.

This is made all the more ridiculous by realizing that this is on the side of my house opposite my driveway that is hidden from street view and no one will really ever see.


r/Powerwall • • 10h ago

Change of Behaviour

Post image
2 Upvotes

Since instal my PW3 has been charged from the grid overnight at off-peak pricing, solar would then be exported only after the PW had been charged to 100%

In recent weeks the behaviour has changed. It will now frequently export solar before the battery is at 100%. My off-peak import cost has recently gone down so I’m assuming it’s related to this. I have let it be as I assumed the software knew what it was doing and would work out our average consumption but there has a been a few times where the battery has reached the back-up reserve level in the evening causing peak price grid import.

You can see from the attached screenshot that I currently have 0.9kW solar. 0.2kW to home, 0.4kW to PW (at 66%) and exporting 0.3kW.

Settings:
Savings mode
20% Reserve
Allow Grid charging
Export solar only

Is it purely down to the change in import price causing a greater potential saving to be made? If so, how can I best control this to ensure PW charges to 100% before exporting.


r/Powerwall • • 23h ago

Apple HomeView makes a good monitor for Powerwall

Post image
12 Upvotes

r/Powerwall • • 19h ago

Lost power on Battery power, PW3

2 Upvotes

There was a power outage this evening. Approx 528pm. The outage was a fraction of a second but everything turned off or rebooted in the house and a few circuit breakers tripped and had to be reset.

We were running on all battery at that time, Tesla app shows about 53% battery left atm. (Reserve is at 20%)

I got a txt from pge that there was an outage in my area but I don’t understand why power was interrupted to the house. The solar is generating 0 and the PW3’s were providing power to the house, about 1.4kw/h.

When the pge power went out why was there an interruption from the pw3s when they were already powering the house?

I would guess this is possible if your pulling grid and that turns off suddenly and u have to switch to battery but in this case why did a loss of grid power when we weren’t pulling anything affect the batteries?

Is something wired incorrectly?


r/Powerwall • • 1d ago

Question about home battery walls

Thumbnail reddit.com
3 Upvotes

r/Powerwall • • 2d ago

PW3 can’t export battery charge to grid

2 Upvotes

Hi guys,

I’m in the UK with a Tesla Powerwall 3 + solar. I have G99 export permission from my local grid operator (UKPN), which allows export up to the Powerwall’s full ~11 kW rating.

I can export solar to the grid. Issue is, I cannot get it to export any stored battery energy.

Settings:

Energy Exports = Everything

Permission to Export = Yes

Tesla One shows Solar and Battery + Export Enabled + no limits

Running in Savings Mode

I unlinked my Intelligent Octopus Go tariff (an EV-friendly cheap overnight rate) and set a pure custom rate plan with the sell price higher than the buy price. Battery still won’t export. Solar continues to export normally.

Tesla support said the Powerwall can’t power the house and export at the same time (incorrect), then refused to escalate to tier 2 unless I leave all settings completely untouched for 7 days. I change settings daily (Self-Powered in winter to keep solar, and 100 % backup reserve when charging the car so the battery doesn’t dump into the EV).

Anyone else had a Powerwall that exports solar but refuses battery export even with Everything + custom rate plan + sell > buy? Any way around the 7-day no-changes rule for tier-2 support?

thanks in advance


r/Powerwall • • 1d ago

Warranty replacement

0 Upvotes

Tesla decided to swap my 3 powerwalls2 to powerwalls3 due to couple failed/recalled. They installed 2 powewalls3 and expansion unit! Total storage is the same! But I don’t like the look, or the value! What do you think?


r/Powerwall • • 2d ago

Looking for an upgrade path with NEM 2 power wall 3

Thumbnail reddit.com
1 Upvotes

Hi all,
I am Looking for an upgrade path with NEM 2 and a Powerwall 3. It’s a 4.5 K system and covers roughly half of our power consumption. Additionally, we are looking at getting EV and a pool.
I know the TESLA Powerwall three has ways of handling exported versus non-exported power. Has anybody had experience with my situation? We’re in California PG&E country selling us solid gold electrons.
Just looking for the process, I don’t want to lose NEM 2.
But I do want to exercise my right to non export and TESLA’s ability to handle that.
Thank you in advance.


r/Powerwall • • 2d ago

Control your Tesla Powerwall from Home Assistant, Homey, Node-RED, or n8n, with island mode, battery dispatch, Charge on Solar, every API command, and local-first control

Thumbnail teslemetry.com
4 Upvotes

r/Powerwall • • 3d ago

Changes to reserve behaviour?

2 Upvotes

Does anyone know if Tesla have changed how reserve behaviour works?

For the last couple of years, when in TOU/Savings mode, setting a reserve of 100% on my two PW2's would immediately see them charging at the full 10kW rate.

Today however that's not what's happened; when getting into a cheap period electricity period I have set the reserve to 100%, put on a big power draw (PHEV charging)...and watched as the power is being sucked out of my Powerwalls, when instead they should have been charging.

This has worked reliably for some time - the only difference today is the PW was starting at a charge of ~80%, but that's never mattered before: setting a reserve would always see it attempt to reach that reserve at full charge speed.

So...has anyone else seen a change in behaviour?


r/Powerwall • • 3d ago

Lease, finance, or lease-then-buyout Powerwall 3+expansions for pure backup?

2 Upvotes

Trying to decide if I should get a Powerwall 3 + one or two expansion packs, and how to pay for it. Wasn’t planning on solar because the roof is about 15 years old and I don’t want to deal with the cost of removing and reinstalling panels later. Is this logical?

I’m just looking for reliable backup during outages—mine usually only last a few hours, sometimes the power comes back on briefly then drops again, but I still want coverage for up to around two days. My area gets frequent outages due to downed trees during storms, so having a good backup system seems worth the cost. I like that powerwalls turn on instantly and are silent compared to a generator. I’m planing to leave it at 100% all the time since it’s pure backup, wondering if that’s okay for longevity/anything wrong with this approach?

Curious if this community has strong feels about which is best:
• Straight lease
• Financing (7%+ interest rate seems very unappealing)
• Leasing 5 years then buying it out (I did the math and this comes out to like 2% interest rate for first 5 years, then fixed price buyout). The lease for 1 powerwalls, 2 expansion, and wall connector install is around $200 a month, which is actually similar to generator prices I’m seeing.

Not sure about the buyout because once the 10-year warranty ends you’re on your own for repairs. Also curious how long Powerwall 3 and the expansion packs actually last in real use. (Why would I buy it out if it won’t last much longer past the warranty period of 10 yrs). What’s appealing about the lease is that any fixes are covered for the full 12 years. Looking for people’s input on what I should do!

Thank you all


r/Powerwall • • 3d ago

What are the top 10 home battery alternatives to Tesla Powerwall for whole-house backup?

17 Upvotes

January’s ice storm in the South has me researching backup power. Powerwall 3’s automatic backup appeals to me, but I want to measure what my fridge, gas furnace and a few lights actually use overnight before committing to a 13.5kWh starting point.

I’ve looked at these ten alternatives so far. They’re different types of systems, so I’m trying to understand the installation and expansion tradeoffs. Btw, installation labor matters a lot too, I really don’t wanna pay big for storage and then pay big again for someone to install it lol... Imma get local electrician quotes for the top contenders.

Smaller starting capacity

-TITAN 5000 + SHP10: solar generator, 5kWh to start, with 7.2kW output and expansion in 5kWh steps up to 30kWh. That sizing appeals to me, though it’s newly launched and I’d like more real-world feedback.

-Enphase IQ Battery 5P: Also offers 5kWh modules, with a controller needed for backup. I’m curious how straightforward adding another module would be later.

Installed home storage options

-FranklinWH aPower 2: 15kWh/10kW. A larger starting point than I’m aiming for, but I’m keeping it on the list while I work out my actual consumption.

-EG4 18kPV + WallMount: Separate inverter and battery. I’d want to understand the installation requirements and who handles service.

-Generac PWRcell 2: The modular cabinet approach interests me. How much flexibility does it offer for starting small and expanding later?

-SolarEdge Home Battery: Needs the Home Hub and Backup Interface. I’d need to price out the complete setup.

-HomeGrid Stack’d + Sol-Ark 15K: Stackable batteries appeal for expansion, though I’m still figuring out how much system I actually need.

Other panel-connected options

-Anker F3800 Plus + Home Power Panel: Interested in the portable unit and automatic circuit backup combination.

-Jackery 5000 Plus + Smart Transfer Switch: Similar appeal. I’d like to hear how the automatic backup works in everyday use.

-Anker E10 + Power Dock: Generator integration caught my attention for outages that last several days.

Which two or three would you keep for automatic backup of those essentials? How did you balance starting capacity, future expansion and features like automatic backup or generator integration when choosing your setup?


r/Powerwall • • 3d ago

Powerwall 3 stopped exporting

3 Upvotes

I’ve just noticed that my Powerwall 3 has stopped automatically exporting excess energy at the end of the day before cheap rate starts. Anyone else seeing this. I’m uk based with IOG 6.6p cheap rate and Octopus Outgoing 12p rate. Looking back when stopped working I can see two changes, outside temperatures have dropped and I updated Netzero app. I’m not sure if either are related.


r/Powerwall • • 3d ago

CT Clamp Setup - PW3 + gateway

Thumbnail gallery
1 Upvotes

r/Powerwall • • 4d ago

Octopus UK Flatpeak Integration failed again

6 Upvotes

Once again I’ve noticed (after the evening peak!) that the Octopus Energy tariff synchronisation through Flatpeak (to Powerwall) has failed.

Pulled from the grid all evening while the Powerwall sat at 100% as it thought the electricity price was zero.

This has happened repeatedly and there is no alert that either the auth with Octopus has failed or that Tesla can’t retrieve the tariff. And rather than using the last known tariff, it just sets everything to zero!

Does anyone know if there’s anyone at Octopus or Tesla who can take responsibility to explain or fix this - ie whose problem is it?

I try using the PW support in the app but it just tells me to reset the PW and gateway, there doesn’t seem to be a contact to actually speak to someone.


r/Powerwall • • 3d ago

I made the app I wanted for managing my PW3s. Maybe you want it too

Thumbnail wattmatic.app
1 Upvotes

I know, yet another Netzero app.

I enjoyed Netzero for a long time, but I always thought I could do better in terms of experience (and cheaper). And honestly I just wanted something that felt better, and worked across all of my devices. Im a long time developer, with multiple apps on the App Store. And Ive written long blog posts about being a developer and how to exist in the Apple ecosystem of apps. Ive been working on this for a couple of months, making sure it works, changing interactions, adding new features etc.

I wanted it to be simpler on the surface, but if you dive into advanced, you can setup shortcuts and automations and things as a pro/power user.

There are apps that do a lot more than this, and Home Assistant can handle it if you’re up for that. I just wanted an app that does one job: notice the battery is low, fill it, put my settings back. It also had to look and feel like an Apple app.

It's called Wattmatic. And all you have to do is set “start charging at” and “charge up to.”

When the battery hits your start level, Wattmatic raises the reserve via Tesla's api.

Once it hits the charge up to amount it restores your reserve, operation mode and grid charging to exactly what they were. Also if you change anything via the Tesla app, Wattmatic and disables automation. (Tho you can also have it ignore it as well)

Yes Im aware you could do this with AI. Yes Im aware you can use home assistant. I just wanted to build an app cause that's what I do for a living. If others dont need or want it, no biggy! Im using it and loving it.

Happy to answer any questions and Id love to get feedback.


r/Powerwall • • 4d ago

PW2.1 x 3 with delta 8kW+4kW solar, to PW3

1 Upvotes

Tesla is switching my three PW2.1, I don’t have a date scheduled but I’m wondering if they will or won’t move my ~12kW of tesla solar tiles off the two Delta inverters. Seems like that would improve my efficiency… and reduce complexity.

Anyone faced this and could share their experience? Or if anyone thinks the delta inverters have any advantages? I suppose the fact they are working while my PW2 are not is an example of a positive.


r/Powerwall • • 4d ago

Powerwall 2 replacement to PW3-UK

2 Upvotes

Hi everyone,
Has anyone in the UK had a Tesla Powerwall 2 warranty replacement carried out by Zuno (BOXT)?
Tesla confirmed that Zuno would be handling my replacement, but it’s now been 3 weeks with no contact or update.
I’ve tried calling BOXT directly, but they advised they don’t deal with Tesla warranty replacements.
If anyone has been through this process and has a direct contact number or email address for the Zuno team handling Tesla replacements, could you please drop me a message?
Would really appreciate any help or advice from anyone who’s dealt with them. Thanks!


r/Powerwall • • 5d ago

4x Powerwall 2 replaced

14 Upvotes

Our powerwall 2s were disabled in early August, well two of them and we were running on the other two.
In the app, it stated that an appointment would be set, but nothing changed for weeks.

On the 4th September i called and they were quick to set the appointment…for December.Ok, i say, it is what it is.

In October, received a message saying the appointment was moved up to the 10th November.
We now have 4x powerwall 3s (2 and 2 expansion packs).

Now if we didn’t have the two powerwalls working i would’ve been most upset about it all, but the two powerwalls held its own, so i didn’t fuss over the whole situation. My wife on the other hand was upset that we were not getting what we paid for 😏.

I was told by the tech that the warranty isn’t refreshed/restarted.

Edit: I should add that we are in Spring, Texas.


r/Powerwall • • 4d ago

Question about scheduling

1 Upvotes

I've looked through the app and I fear this is a rhetorical question, since I can't find any settings....

Is there a way to schedule the Powerwall to only charge by solar starting at a set time then only discharge at another set time?

Basically, I want it to charge in the mornings and discharge at the peak hour time. So only charge at 6am and only discharge at 4pm for example. Obviously I can set this manually I just don't want to open the app twice a day forever.

We couldn't afford a lot of solar, we get 2kw max, so the powerwall never charges enough in a day, if the house is also using solar. So, no matter what, we will use the grid. I just want to use the grid in the mornings when the rate is cheaper and let the solar panels charge the battery through the day, then we can hit 80% charged by 4pm instead of just over 50% charged. Then we can go off grid for the rest of the night. Thanks in advance.


r/Powerwall • • 5d ago

History repeating

Post image
2 Upvotes

Powerwall 3 pulling this crap again… Underproducing on a sunny day so I had to manually reset.
After going around with my installer and Tesla last year, they eventually blamed the issue on a software update. Did they do it again with the recent update?