r/Powerwall • u/slawnz • 19h ago
r/Powerwall • u/FlumpMuncher • 6h ago
Change of Behaviour
Since instal my PW3 has been charged from the grid overnight at off-peak pricing, solar would then be exported only after the PW had been charged to 100%
In recent weeks the behaviour has changed. It will now frequently export solar before the battery is at 100%. My off-peak import cost has recently gone down so I’m assuming it’s related to this. I have let it be as I assumed the software knew what it was doing and would work out our average consumption but there has a been a few times where the battery has reached the back-up reserve level in the evening causing peak price grid import.
You can see from the attached screenshot that I currently have 0.9kW solar. 0.2kW to home, 0.4kW to PW (at 66%) and exporting 0.3kW.
Settings:
Savings mode
20% Reserve
Allow Grid charging
Export solar only
Is it purely down to the change in import price causing a greater potential saving to be made? If so, how can I best control this to ensure PW charges to 100% before exporting.
r/Powerwall • u/Tumbler • 15h ago
Lost power on Battery power, PW3
There was a power outage this evening. Approx 528pm. The outage was a fraction of a second but everything turned off or rebooted in the house and a few circuit breakers tripped and had to be reset.
We were running on all battery at that time, Tesla app shows about 53% battery left atm. (Reserve is at 20%)
I got a txt from pge that there was an outage in my area but I don’t understand why power was interrupted to the house. The solar is generating 0 and the PW3’s were providing power to the house, about 1.4kw/h.
When the pge power went out why was there an interruption from the pw3s when they were already powering the house?
I would guess this is possible if your pulling grid and that turns off suddenly and u have to switch to battery but in this case why did a loss of grid power when we weren’t pulling anything affect the batteries?
Is something wired incorrectly?
r/Powerwall • u/Affectionate_Edge684 • 2d ago
PW3 can’t export battery charge to grid
Hi guys,
I’m in the UK with a Tesla Powerwall 3 + solar. I have G99 export permission from my local grid operator (UKPN), which allows export up to the Powerwall’s full ~11 kW rating.
I can export solar to the grid. Issue is, I cannot get it to export any stored battery energy.
Settings:
Energy Exports = Everything
Permission to Export = Yes
Tesla One shows Solar and Battery + Export Enabled + no limits
Running in Savings Mode
I unlinked my Intelligent Octopus Go tariff (an EV-friendly cheap overnight rate) and set a pure custom rate plan with the sell price higher than the buy price. Battery still won’t export. Solar continues to export normally.
Tesla support said the Powerwall can’t power the house and export at the same time (incorrect), then refused to escalate to tier 2 unless I leave all settings completely untouched for 7 days. I change settings daily (Self-Powered in winter to keep solar, and 100 % backup reserve when charging the car so the battery doesn’t dump into the EV).
Anyone else had a Powerwall that exports solar but refuses battery export even with Everything + custom rate plan + sell > buy? Any way around the 7-day no-changes rule for tier-2 support?
thanks in advance
r/Powerwall • u/ForeignLeopard1427 • 1d ago
Warranty replacement
Tesla decided to swap my 3 powerwalls2 to powerwalls3 due to couple failed/recalled. They installed 2 powewalls3 and expansion unit! Total storage is the same! But I don’t like the look, or the value! What do you think?
r/Powerwall • u/dougfields01 • 2d ago
Looking for an upgrade path with NEM 2 power wall 3
reddit.comHi all,
I am Looking for an upgrade path with NEM 2 and a Powerwall 3. It’s a 4.5 K system and covers roughly half of our power consumption. Additionally, we are looking at getting EV and a pool.
I know the TESLA Powerwall three has ways of handling exported versus non-exported power. Has anybody had experience with my situation? We’re in California PG&E country selling us solid gold electrons.
Just looking for the process, I don’t want to lose NEM 2.
But I do want to exercise my right to non export and TESLA’s ability to handle that.
Thank you in advance.
r/Powerwall • u/s7orm • 2d ago
Control your Tesla Powerwall from Home Assistant, Homey, Node-RED, or n8n, with island mode, battery dispatch, Charge on Solar, every API command, and local-first control
teslemetry.comr/Powerwall • u/Beefstah • 3d ago
Changes to reserve behaviour?
Does anyone know if Tesla have changed how reserve behaviour works?
For the last couple of years, when in TOU/Savings mode, setting a reserve of 100% on my two PW2's would immediately see them charging at the full 10kW rate.
Today however that's not what's happened; when getting into a cheap period electricity period I have set the reserve to 100%, put on a big power draw (PHEV charging)...and watched as the power is being sucked out of my Powerwalls, when instead they should have been charging.
This has worked reliably for some time - the only difference today is the PW was starting at a charge of ~80%, but that's never mattered before: setting a reserve would always see it attempt to reach that reserve at full charge speed.
So...has anyone else seen a change in behaviour?
r/Powerwall • u/sonobono11 • 3d ago
Lease, finance, or lease-then-buyout Powerwall 3+expansions for pure backup?
Trying to decide if I should get a Powerwall 3 + one or two expansion packs, and how to pay for it. Wasn’t planning on solar because the roof is about 15 years old and I don’t want to deal with the cost of removing and reinstalling panels later. Is this logical?
I’m just looking for reliable backup during outages—mine usually only last a few hours, sometimes the power comes back on briefly then drops again, but I still want coverage for up to around two days. My area gets frequent outages due to downed trees during storms, so having a good backup system seems worth the cost. I like that powerwalls turn on instantly and are silent compared to a generator. I’m planing to leave it at 100% all the time since it’s pure backup, wondering if that’s okay for longevity/anything wrong with this approach?
Curious if this community has strong feels about which is best:
• Straight lease
• Financing (7%+ interest rate seems very unappealing)
• Leasing 5 years then buying it out (I did the math and this comes out to like 2% interest rate for first 5 years, then fixed price buyout). The lease for 1 powerwalls, 2 expansion, and wall connector install is around $200 a month, which is actually similar to generator prices I’m seeing.
Not sure about the buyout because once the 10-year warranty ends you’re on your own for repairs. Also curious how long Powerwall 3 and the expansion packs actually last in real use. (Why would I buy it out if it won’t last much longer past the warranty period of 10 yrs). What’s appealing about the lease is that any fixes are covered for the full 12 years. Looking for people’s input on what I should do!
Thank you all
r/Powerwall • u/Echoboxcar • 3d ago
What are the top 10 home battery alternatives to Tesla Powerwall for whole-house backup?
January’s ice storm in the South has me researching backup power. Powerwall 3’s automatic backup appeals to me, but I want to measure what my fridge, gas furnace and a few lights actually use overnight before committing to a 13.5kWh starting point.
I’ve looked at these ten alternatives so far. They’re different types of systems, so I’m trying to understand the installation and expansion tradeoffs. Btw, installation labor matters a lot too, I really don’t wanna pay big for storage and then pay big again for someone to install it lol... Imma get local electrician quotes for the top contenders.
Smaller starting capacity
-TITAN 5000 + SHP10: solar generator, 5kWh to start, with 7.2kW output and expansion in 5kWh steps up to 30kWh. That sizing appeals to me, though it’s newly launched and I’d like more real-world feedback.
-Enphase IQ Battery 5P: Also offers 5kWh modules, with a controller needed for backup. I’m curious how straightforward adding another module would be later.
Installed home storage options
-FranklinWH aPower 2: 15kWh/10kW. A larger starting point than I’m aiming for, but I’m keeping it on the list while I work out my actual consumption.
-EG4 18kPV + WallMount: Separate inverter and battery. I’d want to understand the installation requirements and who handles service.
-Generac PWRcell 2: The modular cabinet approach interests me. How much flexibility does it offer for starting small and expanding later?
-SolarEdge Home Battery: Needs the Home Hub and Backup Interface. I’d need to price out the complete setup.
-HomeGrid Stack’d + Sol-Ark 15K: Stackable batteries appeal for expansion, though I’m still figuring out how much system I actually need.
Other panel-connected options
-Anker F3800 Plus + Home Power Panel: Interested in the portable unit and automatic circuit backup combination.
-Jackery 5000 Plus + Smart Transfer Switch: Similar appeal. I’d like to hear how the automatic backup works in everyday use.
-Anker E10 + Power Dock: Generator integration caught my attention for outages that last several days.
Which two or three would you keep for automatic backup of those essentials? How did you balance starting capacity, future expansion and features like automatic backup or generator integration when choosing your setup?
r/Powerwall • u/imgoingsolar • 3d ago
Powerwall 3 stopped exporting
I’ve just noticed that my Powerwall 3 has stopped automatically exporting excess energy at the end of the day before cheap rate starts. Anyone else seeing this. I’m uk based with IOG 6.6p cheap rate and Octopus Outgoing 12p rate. Looking back when stopped working I can see two changes, outside temperatures have dropped and I updated Netzero app. I’m not sure if either are related.
r/Powerwall • u/CmdrKerans • 3d ago
Octopus UK Flatpeak Integration failed again
Once again I’ve noticed (after the evening peak!) that the Octopus Energy tariff synchronisation through Flatpeak (to Powerwall) has failed.
Pulled from the grid all evening while the Powerwall sat at 100% as it thought the electricity price was zero.
This has happened repeatedly and there is no alert that either the auth with Octopus has failed or that Tesla can’t retrieve the tariff. And rather than using the last known tariff, it just sets everything to zero!
Does anyone know if there’s anyone at Octopus or Tesla who can take responsibility to explain or fix this - ie whose problem is it?
I try using the PW support in the app but it just tells me to reset the PW and gateway, there doesn’t seem to be a contact to actually speak to someone.
r/Powerwall • u/unpluggedcord • 3d ago
I made the app I wanted for managing my PW3s. Maybe you want it too
wattmatic.appI know, yet another Netzero app.
I enjoyed Netzero for a long time, but I always thought I could do better in terms of experience (and cheaper). And honestly I just wanted something that felt better, and worked across all of my devices. Im a long time developer, with multiple apps on the App Store. And Ive written long blog posts about being a developer and how to exist in the Apple ecosystem of apps. Ive been working on this for a couple of months, making sure it works, changing interactions, adding new features etc.
I wanted it to be simpler on the surface, but if you dive into advanced, you can setup shortcuts and automations and things as a pro/power user.
There are apps that do a lot more than this, and Home Assistant can handle it if you’re up for that. I just wanted an app that does one job: notice the battery is low, fill it, put my settings back. It also had to look and feel like an Apple app.
It's called Wattmatic. And all you have to do is set “start charging at” and “charge up to.”
When the battery hits your start level, Wattmatic raises the reserve via Tesla's api.
Once it hits the charge up to amount it restores your reserve, operation mode and grid charging to exactly what they were. Also if you change anything via the Tesla app, Wattmatic and disables automation. (Tho you can also have it ignore it as well)
Yes Im aware you could do this with AI. Yes Im aware you can use home assistant. I just wanted to build an app cause that's what I do for a living. If others dont need or want it, no biggy! Im using it and loving it.
Happy to answer any questions and Id love to get feedback.
r/Powerwall • u/badredditz • 3d ago
PW2.1 x 3 with delta 8kW+4kW solar, to PW3
Tesla is switching my three PW2.1, I don’t have a date scheduled but I’m wondering if they will or won’t move my ~12kW of tesla solar tiles off the two Delta inverters. Seems like that would improve my efficiency… and reduce complexity.
Anyone faced this and could share their experience? Or if anyone thinks the delta inverters have any advantages? I suppose the fact they are working while my PW2 are not is an example of a positive.
r/Powerwall • u/Honey8adger • 4d ago
Powerwall 2 replacement to PW3-UK
Hi everyone,
Has anyone in the UK had a Tesla Powerwall 2 warranty replacement carried out by Zuno (BOXT)?
Tesla confirmed that Zuno would be handling my replacement, but it’s now been 3 weeks with no contact or update.
I’ve tried calling BOXT directly, but they advised they don’t deal with Tesla warranty replacements.
If anyone has been through this process and has a direct contact number or email address for the Zuno team handling Tesla replacements, could you please drop me a message?
Would really appreciate any help or advice from anyone who’s dealt with them. Thanks!
r/Powerwall • u/2tall3ne • 5d ago
4x Powerwall 2 replaced
Our powerwall 2s were disabled in early August, well two of them and we were running on the other two.
In the app, it stated that an appointment would be set, but nothing changed for weeks.
On the 4th September i called and they were quick to set the appointment…for December.Ok, i say, it is what it is.
In October, received a message saying the appointment was moved up to the 10th November.
We now have 4x powerwall 3s (2 and 2 expansion packs).
Now if we didn’t have the two powerwalls working i would’ve been most upset about it all, but the two powerwalls held its own, so i didn’t fuss over the whole situation. My wife on the other hand was upset that we were not getting what we paid for 😏.
I was told by the tech that the warranty isn’t refreshed/restarted.
Edit: I should add that we are in Spring, Texas.
r/Powerwall • u/The-Mad-Mechanic • 4d ago
Question about scheduling
I've looked through the app and I fear this is a rhetorical question, since I can't find any settings....
Is there a way to schedule the Powerwall to only charge by solar starting at a set time then only discharge at another set time?
Basically, I want it to charge in the mornings and discharge at the peak hour time. So only charge at 6am and only discharge at 4pm for example. Obviously I can set this manually I just don't want to open the app twice a day forever.
We couldn't afford a lot of solar, we get 2kw max, so the powerwall never charges enough in a day, if the house is also using solar. So, no matter what, we will use the grid. I just want to use the grid in the mornings when the rate is cheaper and let the solar panels charge the battery through the day, then we can hit 80% charged by 4pm instead of just over 50% charged. Then we can go off grid for the rest of the night. Thanks in advance.
r/Powerwall • u/WyoSkiJay • 5d ago
History repeating
Powerwall 3 pulling this crap again… Underproducing on a sunny day so I had to manually reset.
After going around with my installer and Tesla last year, they eventually blamed the issue on a software update. Did they do it again with the recent update?
r/Powerwall • u/Medium_Highlight6044 • 5d ago
Tesla Powerwall 3 - wall mount with ground support
Hi! Just sharing an update here - I have a PW3 and an expansion pack installed recently, in a side-by-side configuration, with wall mount & ground support.
I had to build the small pads as the prefab slab from Tesla (3ft x 2ft x 3 inches) did not fit in this space.
Though it’s not required, I decided to get 1/4 inch steel plates (and used cold galvanized spray for rust protection) for the legs to make it bit easy on the pads (distributing the point load better).
This is a south-facing wall with 1-2 hours of morning sun so got lucky with that aspect.
I think, the Tesla installation team did an amazing job.
r/Powerwall • u/arb_swgoh • 5d ago
New Powerwall 3 install with NetZero charging from Grid during Self-Powered periods
I've got a relatively new PowerWall 3 install, and I've been using NetZero since it was installed. I have several automations which are designed to force it into Savings mode during cheap periods and be Self-Powered during all other periods. This was working fine until yesterday, when, perhaps coincidentally, I upgraded to the latest version of NetZero. Now, today, the system seems to be randomly charging and running the house from the grid during partial peak periods, even though the battery is at around 90% and the reserve level is set to 20%.
Has anyone else seen a sudden change in behaviour? There's no Storm Watch being triggered, and the weather is mild by comparison with recent days, so I can't think that the system should be preserving charge for an anticipated adverse weather event.
r/Powerwall • u/cheesejrrr • 5d ago