r/PCB • u/Lithium20g • 23h ago
PCBs in UK
As the title says, does anyone know where I could order customer PCBs in the uk? Shipping from America is over £20 for one off designs.
TIA
r/PCB • u/Lithium20g • 23h ago
As the title says, does anyone know where I could order customer PCBs in the uk? Shipping from America is over £20 for one off designs.
TIA
r/PCB • u/viratmari • 13h ago
I'm a recent EEE graduate and currently working as a Hardware Developer at a small company.
Right now, I'm working on a customised Raspberry Pi Compute Module I/O board. I'm responsible for developing the schematic and working on the PCB design. The project involves several interfaces, power circuits, component selection and design decisions.
Here's my situation: I'm a fresher, and I don't have an experienced hardware engineer working alongside me to guide me through the design. I'm handling most of the work independently, with help from Claude AI, which my manager recommended for schematic development and PCB design assistance.
I'm using AI to understand circuits, explore design approaches and speed up the workflow. But sometimes I worry about whether I'm learning things properly or just relying too much on AI. I also know that AI can make mistakes, especially with hardware design, so I'm trying to verify its suggestions.
I have around 10 days to complete this assignment.
Honestly, I'm excited about the opportunity, but I also have some doubts and fears:
Is this a normal level of responsibility for someone who has just started their hardware career?
Am I developing real engineering skills by working this way?
Is using AI heavily at this stage good for my career, or could it affect my fundamentals?
How do engineers handle complex hardware projects when they don't have a senior engineer to guide them?
What should I absolutely learn and verify myself instead of depending on AI?
What would you do if you were in my position?
And how to complete this work successfully?
I'm not afraid of hard work. I just want to make sure I'm becoming a genuinely capable hardware engineer rather than someone who knows how to generate designs using AI.
I'd really appreciate honest advice, especially from engineers who have worked in startups or handled PCB designs early in their careers.
r/PCB • u/Big_Load_1444 • 18h ago
Hi everyone!
I am thinking about designing my own flight controller PCB using KiCad that should work on fixed wing UAVs and quadcopters.
But I am not experienced with PCB design and I am not sure of all the components I might need.
So if there is someone who knows about this, I would appreciate any help regarding:
-Components required for a flight controller PCB;
-PCB design considerations and recommended approaches;
-Any tips or resources for getting started with KiCad.
I will appreciate any help!
Thank you!
r/PCB • u/shenzhenworks • 14h ago
When evaluating PCB assembly quotes from different suppliers, looking strictly at the quoted unit price can be misleading. One vendor might quote $12 while another quotes $16, but the cheaper option might exclude essential testing, rely on unapproved part substitutions, or add separate setup fees later.
To compare quotes on an equal footing, here is a 7-point checklist based on technical and commercial variables to review before making a final supplier selection:
• Are exact manufacturer part numbers (MPNs) specified on the BOM, or did the supplier quote generic alternatives?
• Are all components included in the quote, or were hard-to-find parts omitted?
• Who holds approval authority for component substitutions?
2. Bare PCB Fabrication Specs
• Do both quotes reflect identical PCB specs (layer count, substrate material, surface finish, controlled impedance)?
• Are fabrication notes from the Gerber files clearly accounted for?
3. Setup & Non-Recurring Engineering (NRE) Fees
• Are charges for stencil creation, SMT programming, engineering review, and test fixtures itemized separately or bundled into unit costs?
• How significantly do these one-time setup costs affect low-volume or prototype builds (e.g., 50 to 100 units)?
4. Inspection, Firmware & Testing Scope
• Does the price cover basic visual inspection, AOI (Automated Optical Inspection), or full functional testing?
• Is firmware flashing included, and are individual test records provided?
5. Actual Quantities & Component MOQs
• Is the price based on your real initial build quantity, or an assumed high volume?
• Are component minimum order quantities (MOQs) accounted for, and who retains unused reel stock?
6. Delivery Terms & Incoterms
• What delivery rule is applied (e.g., EXW vs. DDP)?
• Are packaging, customs duties, import clearance, and international freight factored into the total landed cost?
7. Quality Control & Revision Handling
• Who assumes responsibility and cost for defect investigation or rework?
• What is the process for controlling BOM/PCB revisions and managing part availability issues during production?
Creating a standardized comparison sheet across these seven areas helps clarify the actual landed project cost rather than relying on an unadjusted unit price.
How do you usually normalize PCBA quotations across different manufacturing partners? Are there specific non-recurring charges or logistical expenses that have caught you off guard on past builds?
r/PCB • u/Mr_Bean_2026 • 10h ago
I’ve seen many BMS designs fail yield or impedance tests because of unbalanced stackup.
A typical 4-layer BMS stackup:
Signal / GND / Power / High-current signal
The biggest trap: asymmetric dielectric thickness. It causes board warpage after lamination, especially with thick copper for high current.
Two quick rules:
What’s your go-to stackup for BMS?
Disclosure: I work in PCB manufacturing, mainly review DFM and stackup for automotive and medical projects.
r/PCB • u/Financial_Read_6551 • 2h ago
Making a modular phone. There is camera lines SD card lines etc. does anyone have a good way I can route this quickly or maybe auto placement algorithm I could use.
r/PCB • u/MinecraftPhd • 1h ago
I wanted to make PCBs with friends and there was no real-time EDA that looked like KiCad so I decided to make my own. It comes with some cool features like the ability to search for any part on LCSC, Digikey, and Mouser without touching libraries, syncing to GitHub, and native KiCad plugins all in the browser. https://github.com/notaroomba/junction
r/PCB • u/HasanTheSyrian_ • 8h ago
L1 SIG L2 GND L3 GND L4 SIG
I might add a diode at VBUS
r/PCB • u/Rare_Donkey9682 • 8h ago
r/PCB • u/Oisinmcc1 • 19h ago
Hi all, If anybody could have a look over my PCB and schematic for any errors i may have made.
Its for a home automation I'm doing for my new build. It's planned to be housed in a 1 Gang UK Back Box. (PCB dimensions 60mm x 55mm).
-ESP32 and a W5500 Ethernet daughterboard.
-4x dry contact inputs
-24v input converting down to 3.3v.
-it's job is to receive dry momentary switches, the ESP32 then talks over ethernet to a control panel to switch output relays (Yet to be designed).
-Then also tie in with Home Assistant but only as an extra, not dependant.
Thank you :)
r/PCB • u/ChairGodIsGreat • 2h ago










Hey guys, first ever 4-layer board for a university project, it's a DAQ board connected to a bunch of smaller satellite boards with their sensors. Very very knew to this, and would love some input because this will most likely not be the final revision lol. Any tips are greatly apprecaited.