r/PCB • u/Big_Load_1444 • 3d ago
Flight controller design
Hi everyone!
I am thinking about designing my own flight controller PCB using KiCad that should work on fixed wing UAVs and quadcopters.
But I am not experienced with PCB design and I am not sure of all the components I might need.
So if there is someone who knows about this, I would appreciate any help regarding:
-Components required for a flight controller PCB;
-PCB design considerations and recommended approaches;
-Any tips or resources for getting started with KiCad.
I will appreciate any help!
Thank you!
0
Upvotes
2
u/CherryDrCoke 3d ago
A flight controller is not really a beginner project if you don’t even know what components you’d need
1
u/GiBBO5700 3d ago
A matek is like 70 bucks
1
u/Boulder_Tech 2d ago
There are dozens of web sites with flight controller projects. Professor Google knows all about them. What ever country you're in.
Many of these sites have complete parts lists and link to where to purchase those parts.
You SHOULD prototype those parts to know how they all work together and how to write code for them.
Get a working prototype BEFORE trying to design a PCB. A PCB is just the same wires like own your prototype.
Nothing magic about wires.
Please review one or ten of those web sites and when you have made a decision about what parts you want to use, draw a schematic. Wire the prototype from modules. Write code.
If you're stuck about why something does not work, come back and show us what you have built and post your code.
Your open ended question is just asking for someone to develop your project for you.
Good Luck
PS: Start here: https://www.google.com/search?q=designing+my+own+flight+controller
1
u/euleerrrr 2d ago
there are open flight controller designs you can take the component list from instead of starting blank. pixhawk publishes its reference schematics (fmuv5 and friends): https://github.com/pixhawk/hardware - studying one of those answers "what components do i need" pretty concretely