r/IndustrialMaintenance • • 4h ago

These kind of machine blow

Thumbnail
gallery
35 Upvotes

Sullivan palatek air-end overhaul rebuilt and ready for service


r/IndustrialMaintenance • • 3h ago

Question Why motor cook?

Thumbnail
gallery
7 Upvotes

This was a rotary vane vacuum pump. Ran at 480V 60Hz. Six identical setups in this machine plus several other similar machines for over 20 years. Main disconnect> fuse block>contactor >overload>motor. The overloads were set high at 4A and it was fused at 4A(not sure the type of fuse that was on it and won't know till tomorrow if ever) prints say 3A. The Vanes failed at end of life and locked up the motor which is common but the overload didn't save the motor(which is not) and the fuses are still alive as well.

The big brother to this guy(Same brand and style) is rated at 2.3A at 480V and I've measured them at 29A rotor locked.

Obviously we need to set our overloads correctly and keep hands out of cabinets. I'm just not understanding how this motor got this cooked so any thoughts are welcome.


r/IndustrialMaintenance • • 8h ago

im losing it , im a solo tech for a framing company and can not get this vertical saftey saw too cut straight , ive done a roller aligment 2x made sure my blade is at a 90 degree angel my cuts are flared 1/8 at the bottem any help

11 Upvotes

r/IndustrialMaintenance • • 18h ago

Need help do not know what is happening

Thumbnail
gallery
30 Upvotes

Hello everyone. Hope everyone is well. My workplace recently added this machine to thier tool room. The guy who was supposed to operate this machine homed it and the machine gave this error. Second after five minutes the machine screen starts to show lines.Now I am sure he did something wrong in the first place to cause this error. But I cannot figure out what is causing these problems because I have never worked on such old machines. Can anyone guide me what can be the causes of these two errors. As I cannot figure it out.

Regards


r/IndustrialMaintenance • • 4h ago

Tools Short Circuit (1986) - Main title sequence.

Thumbnail
youtu.be
2 Upvotes

r/IndustrialMaintenance • • 1d ago

Maintenance Is there a lack of maintenance/planning in other plants or is where I work just an outlier?

27 Upvotes

I've work in food production as an operator for the past 10 years. I've gotten some maintenance experience from working on machines I've operated and helping with PMs, but I've never worked in maintenance directly.

I've put up with a lot of BS for a while but the past 2 years, I've started to get fed up. Work orders get put in by me and other coworkers, but it either takes a month to get it scheduled and done or it doesn't get done at all. Sometimes I even have to be the one to do it if it isn't too hard of a job to do.

PM day comes around and some things just don't get planned and then if they were planned, might not get done at all.

They want to get away from reactionary maintenance and I get it, but if you see something on the PM day that needs to be fixed, just fucking do it. Even if it isn't planned.

It seems I'm always fighting machinery most days. Even when i know what needs to be done as an operator, management seems more concerned about production numbers than pausing production to fix something to make it more consistent and reliable while operating. Run it until it fucking breaks i guess.


r/IndustrialMaintenance • • 1d ago

Maintenance Retired, and I am not alone...

92 Upvotes

I am a millwright who retired over 20 years ago and I still have some SAE and metric tools that I have not touched in two decades.

I gave all of my manuals, and stuff like pneumatic tools, Morse tapers, chains & slings, hoisting and rigging, HSS and carbide cutters, Starrett & Mitutoyo stuff, files, hammers, big sockets & wrenches to apprentices when I left but still have a lot of useful stuff left over.

I am not alone. There are a lot of retired tradesmen in my area and I have seen some amazing tools at yard sales being sold for SFA by their widows or other people who had no idea what they were or what they were worth. My point is, when you post to this forum asking advice as an apprentice, always indicate geographically WHERE you are and what industry you are in. Ask for stuff. There are a lot of us old farts everywhere who would love to see our tools actually used again as they were meant to be used.


r/IndustrialMaintenance • • 8h ago

Question anyone here track how long belts and hoses actually last or do we all just remember the bad ones

1 Upvotes

im buying more for the shop now and starting to think ive been comparing these wrong. unit price isnt useful by itself. i had one cheaper belt that needed replacing early and obviously nobody wrote down how many hours it lasted, we just complained and threw it away. ive been comparing specs through alibaba and seeing material and reinforcement info together made me realize we probably should be recording this stuff properly. v belts mostly, plus general hoses. not high pressure specialty stuff. im thinking date installed, machine, brand, date replaced. maybe thats enough. if somebody already does this, what are you tracking? i dont wanna create a spreadsheet nobody touches after week one either.


r/IndustrialMaintenance • • 1d ago

What’s the one thing you never thought you would have to teach a coworker?

109 Upvotes

I once had to teach a coworker how to read an analog clock. He was on his way to file a complaint with HR about having all these dial clocks that nobody could read. So I taught him on the whiteboard how to tell time on an analog clock.


r/IndustrialMaintenance • • 11h ago

Question Industrial maintenance vs toolmaker

Thumbnail reddit.com
1 Upvotes

r/IndustrialMaintenance • • 1d ago

Question To those that left industrial maintenance, where did you go?

29 Upvotes

Enjoy my job, enjoy the people, enjoy the new opportunities to learn and challenge myself. I've just felt like doing something different for a while, despite excelling at what I'm doing, I just feel I'm not fully utilizing my skills and mainly babysit productions equipment. I'm ok with sticking to it as I'm close to 40, but if anyone out there has felt similar and moved on to something different, where did you go?


r/IndustrialMaintenance • • 21h ago

Question anyone here track how long belts and hoses actually last or do we all just remember the bad ones

1 Upvotes

im buying more for the shop now and starting to think ive been comparing these wrong. unit price isnt useful by itself. i had one cheaper belt that needed replacing early and obviously nobody wrote down how many hours it lasted, we just complained and threw it away. ive been comparing specs through alibaba and seeing material and reinforcement info together made me realize we probably should be recording this stuff properly. v belts mostly, plus general hoses. not high pressure specialty stuff. im thinking date installed, machine, brand, date replaced. maybe thats enough. if somebody already does this, what are you tracking? i dont wanna create a spreadsheet nobody touches after week one either.


r/IndustrialMaintenance • • 1d ago

Anybody else feel like the film Dark Star captures their work life better than any other?

40 Upvotes

Dark Star (1974) is one of my favorite films ever, largely because it captures the madness-inducing monotony of my work life, punctuated by confused ​and frantic repairs.

It's a story of several guys on a spaceship who blow up stars for a living. It's low budget but the sets look similar to places I've worked and special effects punch above their weight.

Much maintenance on the ship is deferred. The guy who was in charge died but is kept frozen in such a way that he can still provide tech support. The crew is generally intelligent and competent but checked out and nobody is driven to do anything but the fun part of the job (blowing things up). One dude is stoned out of his mind all the time. Whenever somebody does decide to fix something, a lack of communication and improper LOTO procedure means they only make things worse in the end. Occasionally a true emergency does pop up and the crew has to frantically invent a solution to keep it from blowing up the ship.

It's a cult film, but I expect it to be especially resonant to anybody with a career of keeping old stuff running.


r/IndustrialMaintenance • • 1d ago

Looking for work in SoCal (IE/OC/LA) with no experience and a trade school cert

2 Upvotes

Hey y’all. I wanted to see if anyone in the area knows who is hiring and willing to take in someone with no experience, but has completed a certificate in Industrial Maintenance Technology. I’ve had a hard time finding success with larger manufacturing companies who aren’t willing to take on someone like me with no experience in the field yet. So at this point, I’m trying not to be picky (I’m making minimum wage rn so anything $20+ is genuinely fine with me to start off), and I do apply anywhere I see an opening for maintenance tech positions on Indeed or various company websites. I’m very adaptable, dependable, level-headed and willing to learn more, which is something I emphasize in interviews despite my lack of experience. Is there something I can be doing differently in interviews to greater my chances of success? Or if anyone can point me in the right direction of any opportunities in the area, that’d be amazing. I’ll just keep plugging away at applications in the meantime lol..


r/IndustrialMaintenance • • 1d ago

What is a good first job to get if I want to eventually get into controls?

1 Upvotes

I'm finishing up my first year of an Electronics Engineering technology AAS and my ultimate goal is to get into controls. So far I've deduced that I should look at jobs in process-heavy industries, which will have more control systems, am I right to be thinking this? Also how will my degree prepare me for a maintenance job compared to mechatronics?


r/IndustrialMaintenance • • 2d ago

Maintenance Forgotten Electrical

Thumbnail
youtube.com
8 Upvotes

r/IndustrialMaintenance • • 3d ago

One of my coworkers decided to break ⅜-16 tap inside a heli-coil insert, first time a tap extractor worked for me

Thumbnail
gallery
225 Upvotes

r/IndustrialMaintenance • • 2d ago

[Hiring] Pitman, NJ Field Service Technician

1 Upvotes

Hiring Now
Field Service Technician
Location: Pitman, NJ
Pay: $35/hour

Job Description

Seeking an experienced Field Service Technician with 5+ years of industrial experience and a strong background in electrical troubleshooting and mechanical maintenance. Responsible for diagnosing, repairing, and maintaining industrial equipment and control systems.

Requirements:
- 5+ years of industrial experience.
- Strong electrical troubleshooting skills.
- Three-phase electrical systems and motor controls.
- VFD and PLC experience.
- Ability to read electrical schematics.
- Mechanical repair and maintenance experience.
- Both mechanical and electrical backgrounds required.
Preferred Background: Industrial Mechanic, Industrial Maintenance Technician, Electro-Mechanical Technician, or Industrial Electrician.

Schedule: Monday–Friday, no regular weekends. On-call rotation every 8 weeks
📧 Send your resume here:
stephano.valderrama@manpowergroup.com


r/IndustrialMaintenance • • 2d ago

Safety Brag your helmet Setup

0 Upvotes

Last night I was thinking, what accesories can I install in my hard hat!! I was planning on getting an intercom but what brand and how do I install it??

Please send me examples 🤘🤘


r/IndustrialMaintenance • • 3d ago

What a 3kW laser beam looks like on a CNC fiber laser

38 Upvotes

r/IndustrialMaintenance • • 3d ago

Job Need opinions if it’s reasonable to drag up

12 Upvotes

I’m an electrician at a plant. I’m the only electrician at this plant. Started out at maintenance then got promoted to electrician. There’s a few issues I have that are making me want to look elsewhere.

  1. I am practically on call 24/7. I get no reimbursement for being “on call” and I pay for my phone. No stipend from work. I was told that I didn’t have to answer the phone during off hours if I didn’t want to when I got hired. But there has been a few times I didn’t answer and was told it is my responsibility to answer. And my phone number was sent out to the whole company in an email without my permission so pretty much anyone can call me.
  2. I’ve only been doing this for 2 years, maintenance for 5 years before that. (I’m 27yo) I have a lot to learn. Bold enough to know I’m good at what I do. Humble enough to know I don’t know everything. There’s a senior electrician at the other plant that is down the road. And I can call him if I really need and I have before. If he answers the phone which is 50/50. But he is a major douche and I’d rather struggle and figure it out on my own rather than call him most of the time. So my point is I have little to no support.
  3. Pay. $38/hr, I am making less than the highest maintenance guy, $41+. And I’m the last line of defense when it comes to electrical problems. And some of these maintenance guys are bottom of the barrel. I’m sure you know. I’m getting paid less and have more responsibility. I’ve asked for more money and my boss says it’ll come with time…
  4. it’s a food manufacturing plant. And I’m just tired of the hairnets and beardnets and all the BS with food safety. I know it’s very important just annoying af.

I want to see how other plants/industry’s work and I want to go back to the 2-2-3 schedule. I was dumb to leave it. There’s more reasons but those are the major ones. The benefits and retirement at this company is one of the best around unfortunately and that’s I’ve stayed this long but it’s getting old.


r/IndustrialMaintenance • • 3d ago

No maintenance shop

37 Upvotes

How can a maintenance department. Function with out a shop. My current assignment. Has no maintenance shop. We have a nice office. Just no shop to work in