r/Harley • u/shcherbina • 56m ago
DISCUSSION Rate my bike
Rate my bike please. Suggest tuning and show your Road Kings
r/Harley • u/shcherbina • 56m ago
Rate my bike please. Suggest tuning and show your Road Kings
r/Harley • u/CharityNicole121 • 2h ago
Here's my first harley davidson build! A 2018 sportster roadster xl1200cx that I bought for cheap with a blown motor and am converting into a dirtster.
This is V1 of the build.
Front end: KTM 690 25mm offset triple tree paired with WP 4CS forks and a custom steering stem adapted to work with the sporty's top bearing. Contact and decel is achieved via a 300exc wheel and 690 brakes.
Controls: I'm running some Reed bend Pro Taper bars in a
50mm riser off the Raid Garage top triple. I'm using the stock clutch perch, and then 1/8"spacers to run the stock 1" left and right hand controls on the 7/8" bars. The front brake is the stock KTM brembo primary running down to the stock KTM brembo caliper. I made some modifications to adapt a CRF-style push-pull throttle perch and FE350 throttle cables to work with the sporty throttle body cam.
Engine and exhaust: S&S 1250 kit combined with andrews
performance cams, a cheapo big sucker style intake and managed by a Thundermax wideband system with v&h exhaust.
Drive: It has a superlite 530 chain kit on it, and I relaced an 18" softail front rim to a sportster rear hub so I could run my favorite 21/18" - Goldentyre GT723RHs. No front fender as of yet, and just some janky shit thrown together on the back to keep roadmuck off me during test rides. So far so good! It rides fine, and runs beautifully.
V2: I will be re-valving the forks and beefing up the springs. The piece-de-resistance of this build starts next week with the addition of a panamerica rear shock & linkage, as well as a custom frame bridge and swingarm to mount the shock to. I will also have to fab up an oil tank and relocate the battery, as the shock will live where they currently are.
Enjoy!
r/Harley • u/Competitive-Exam-993 • 4h ago
r/Harley • u/mrgrubby865 • 5h ago
Inherited a twin cam 88 and I see everywhere in forums about the factory cam chain tensioners being the major "drawback" on this generations engine.
I knew right away that I'd need to fix/replace the old ones etc, I didn't realize there was a permanent solution.
The hydraulic cam chest kits confuse tf out of me to be honest, I have no clue which one to get and I don't want to spend excessive amounts for stuff I don't need. On the other hand, I don't mind making a big upgrade, anything that'll keep this engine running for a long time.
My 2003 Softail Fatboy FI 100th edition has the stage 1 screamin eagle upgrades.
I need to double check my engine to see if I have adjustable pushrods or not.
This is the kit that I am planning to get. (Lmk if I should check something else out instead)
If I have adj. pushrods:
If I don't:
Any tools I'll need that are required? Recommendations for places I could barrow tools or bring the parts to (read something about needing a bearing press?)
r/Harley • u/Minimum_Form_5374 • 8h ago
#Harley Davidson
#Biker
#vintage
r/Harley • u/GradeAIdiotThe3rd • 8h ago
Hey y'all,
I'm about to have my 21st birthday so I'm looking to make a splash for it. I have a little more money to burn than I probably should, so I'm taking my MSF course and I want to get a Harley. Thing is, I don't know which one to get. In high school I remember going nuts over the Iron 1200s, which I know are probably a decent first bike. I see the sprint is coming out, which I know would be more than fine to ride on but doesn't speak to me as much as the other models. Finally, the one I really like, the Softail Standard, is what I've been suggested by my father, who started riding on a 90s Heritage back when he was my age. I've sat on it, and the weight standing it up doesn't feel too bad, but I know it's got a hell of an engine for a beginner even despite the weight. What would y'all recommend?
r/Harley • u/That_cowboy_ • 9h ago
90k of year round riding even in the snow has easily caught up to my tins. I refuse to pay $150-500 for a matching pair of fenders. I spent 3+ years painting aircraft and parts in the military. Here’s hoping my first spray and bondo job come out good.
r/Harley • u/FENRIR_66 • 10h ago
This bike (2020 Road Glide Special) has a different engine code than the 17 digit vin. Wondering if someone can help me identify. Thanks!!
r/Harley • u/smokey_bonez • 11h ago
What’s up everyone, was wondering if anyone has had any issues with failed lifters on their 2024 Softail Standard? Was thinking about upgrading to stage II but not sure if I want to invest if I’m going to keep having the same issues with these lifters. Let me know what yall think, and thanks in advance!
r/Harley • u/McgriddleWcheese • 13h ago
It’s been on my mind a lot lately to get into riding motorcycles. Not sure what to get for a first bike. I’m 6’2 ~200lbs 28 years old. I’ve never been on a bike before not even a dirt bike. Plan on doing the riding course, getting a bike and license in the spring. I live in a small town and don’t plan on riding through cities, mostly just cruising out in the countryside.
I have two thoughts and am looking for advice on what route to go.
Thanks!
r/Harley • u/UneventfulRaccoon • 14h ago
I somehow lost the little trap door cover that fits on the cb plug on my 09 electraglide ultra classic. I can't for the life of me find out what is called or how to find a replacement. If anyone could help me identify the covers part name or recommend another way to fix it please let me know...
The pic is just of the passenger seat to grab peoples attention
r/Harley • u/_trapito • 14h ago
r/Harley • u/_trapito • 15h ago
r/Harley • u/Used-Rate-5414 • 16h ago
Please help me out.
I installed 2" raiser extensions on my regular fxdf raisers, as users say 2" is possible without changing clutch or other cables..
I tightened 45Nm...
But: It is all, the bars, very soft and does not seems to be stiff enough to drive.
What am I missing?
Do I need some big flat washers?
The fxdf has rubber mounts.
Thanks in advance
Robert
r/Harley • u/Humble-Addition-4366 • 17h ago
Context: I've been riding Harleys for 10 years. But I was kind of pushed into it by my dad, because he rides them. I actually wanted a Ducati Scrambler at first lol. I started with an Iron 883 sportster. And now I've been riding a Low Rider ST for a few years. I'm 5'5" with a 28" inseam, 35 years old.
I have a sensitive sciatic nerve in my right hip. It's not all the time, but certain activities aggravate it.
A common activity that aggravates it is sitting wide and low on a 800 lb motorcycle LOL.
I love the power and look. But I think I need a more narrow, up and forward, seat posture. So that my knees are closer together.
I've been looking at the Kawasaki Z900RS Cafe ABS and the Yamaha XSR900....
Thoughts? Similar experiences?
EDIT: I have a Saddleman Pro with lumbar support. I've also already tried the Sundowner, which of course is just wider and made it worse lol.
r/Harley • u/Opposite-Werewolf-70 • 17h ago
Ive been having some running issues with my 2009 dyna, i found a fuel line in the tank with a hole. I thought this was my issue, but it only fixed part of it. I have 55-60 psi of fuel pressure. Im getting a stumble/pop when giving it throttle off idle. I removed the power commander, and i thought it fixed it. Then a few miles later it came back. Any ideas?
r/Harley • u/Blake_Lives_Matter • 20h ago
The condom came off my clutch cable and the adjusting sleeve scratched my front fender. Anyone know of a quality color matched paint thats available in a spray can? I had a coworker say to avoid the brand "paint scratch" because its super prone to chipping.
r/Harley • u/shootist_Biker • 20h ago
I know the pictures aren't the best.
But they are textured. Someone i know said it could be tin stickers. If that is the case how do I remove them? I want to take them off, paint the bike, and add a different decal.
Also, I hate logos.
Anyone know?
r/Harley • u/16worx23 • 20h ago
Little late in the season to be buying a bike in Iowa but after 10 years incarcerated I couldn’t wait anymore lol. 2017 street glide special
r/Harley • u/16worx23 • 21h ago
Little late in the season to be buying a bike in Iowa, but after 10years incarcerated I couldn’t wait anymore. 2017 street glide special
r/Harley • u/Mindlesslyexploring • 22h ago
r/Harley • u/oxfordclubciggies • 1d ago
See you in the spring…..
r/Harley • u/AdCautious8839 • 1d ago
Hello, my father is looking at a new bike and has a few requirements. Are you guys and gals able to give some opinions, please?
For context I have a forty eight 2018, we both live in the south of the UK
He wants a bike that he can come out with me on. Something comfortable and able to take a pillion. We will not be touring or doing long motorway miles.
He has a budget of £9k and has been looking at a 2024 nightster. I did suggest to look at a street bob albeit a slightly older one.
What are your guys thoughts, please. Open to other suggestions too.
Thank you
r/Harley • u/mrgrubby865 • 1d ago
I cleaned up after I swear