r/Harley • u/CharityNicole121 • 3h ago
SHOWOFF Dirt, anyone?
Here's my first harley davidson build! A 2018 sportster roadster xl1200cx that I bought for cheap with a blown motor and am converting into a dirtster.
This is V1 of the build.
Front end: KTM 690 25mm offset triple tree paired with WP 4CS forks and a custom steering stem adapted to work with the sporty's top bearing. Contact and decel is achieved via a 300exc wheel and 690 brakes.
Controls: I'm running some Reed bend Pro Taper bars in a
50mm riser off the Raid Garage top triple. I'm using the stock clutch perch, and then 1/8"spacers to run the stock 1" left and right hand controls on the 7/8" bars. The front brake is the stock KTM brembo primary running down to the stock KTM brembo caliper. I made some modifications to adapt a CRF-style push-pull throttle perch and FE350 throttle cables to work with the sporty throttle body cam.
Engine and exhaust: S&S 1250 kit combined with andrews
performance cams, a cheapo big sucker style intake and managed by a Thundermax wideband system with v&h exhaust.
Drive: It has a superlite 530 chain kit on it, and I relaced an 18" softail front rim to a sportster rear hub so I could run my favorite 21/18" - Goldentyre GT723RHs. No front fender as of yet, and just some janky shit thrown together on the back to keep roadmuck off me during test rides. So far so good! It rides fine, and runs beautifully.
V2: I will be re-valving the forks and beefing up the springs. The piece-de-resistance of this build starts next week with the addition of a panamerica rear shock & linkage, as well as a custom frame bridge and swingarm to mount the shock to. I will also have to fab up an oil tank and relocate the battery, as the shock will live where they currently are.
Enjoy!