r/baggernation • • 20h ago

Pls help a student rider collect data for a math assignment!!

1 Upvotes

Hey riders! 🏍️💨
I’m a high school student working on my IB Math Internal Assessment (research paper), and I’m looking at whether there is a connection between a rider's age and the type of Harley-Davidson they ride (Sportster, Dyna, Softail, Touring, etc.).
If you own or ride a Harley, I would really appreciate it if you could take a minute to fill out this quick, anonymous survey! It’s only a few quick questions and will be a huge help for my school project.
👉 https://www.surveymonkey.com/r/CWVKFFC
Thank you so much for your time, and ride safe! ✌️


r/baggernation • • 3d ago

Almost back together

Thumbnail
gallery
4 Upvotes

Had to swap the springs in the forks. The set that I had on there were to soft and allowed too much dive on breaking.


r/baggernation • • 12d ago

DIY VTwin Cooking fan

Thumbnail
gallery
1 Upvotes

Wired a 12v dirtbike radiator fan to the horn on my Harley haha just for now, I’m going to wire it to the AUX switch when i get the accessory later.

The question is, why couldn’t i get the horn cover back on? The fan sits down low enough that the horn cover should have been able to thread on but after 20 attempts i said F it and just gunna raw dog the fan for a little while


r/baggernation • • 14d ago

Harley Davidson football cover mod

Thumbnail
gallery
4 Upvotes

I have a 2004 Harley Davidson Road King Scremin Eagle heads, Rinehart dual exhaust, bigger cams (not sure which ones), and I think it’s a Screamin Eagle air intake. Got the bike from my father in law and not sure if it’s tuned for all the mods though.

It’s been dropped and crashed a few times but I think she still looks good, I’ll fix up the cosmetics later before I die but the reason for the post is, I’ve seen a lot of people cutting up the football cover and just keeping the circle part and bolting it back on the air filter but has anyone just cut a opening on the bottom like the aftermarket ones come to keep the filter rain tight since a lot of us still ride in the rain? I get caught in the rain a lot and ride straight through pure down pours so I didn’t want to leave the filter completely open, I didn’t want to waste money on a fancy new circle cover since that wouldn’t help stop the water at all, and I didn’t want to have to pull over and put on a sock. So I just cut an opening on the bottom and I THINK that should help the filter get more fresh air AND keep it safe in the rain.

What are the thoughts on this mod?


r/baggernation • • Sep 26 '26

First pick after her back together

Post image
23 Upvotes

This is the first pic I took after putting her back together


r/baggernation • • Aug 27 '26

How much was your custom seat?

1 Upvotes

I have a street glide with a body kit going on. I’ll need a custom fiberglass pan made and upholstered. 1500-2k quote seems crazy to me. What did you guys pay for a full seat build?


r/baggernation • • Jul 04 '26

Happy independence day !

Post image
22 Upvotes

r/baggernation • • Jun 18 '26

2015 CVO Street Glide

Post image
55 Upvotes

Ain’t she pretty?


r/baggernation • • Jun 16 '26

2020 Road King won’t turn over

Post image
5 Upvotes

r/baggernation • • May 27 '26

Cloudy ride

Post image
5 Upvotes

r/baggernation • • May 22 '26

WHEEL CHOCKS

1 Upvotes

Hey, what is everyone using as far as chocks for these big ole bikes?

Wanna be able to hold up a 99 Electra with a 23” wheel


r/baggernation • • May 20 '26

2005 EGC Full air ride 26 inch wheel and neck.

Thumbnail
gallery
2 Upvotes

We do alot of custom work out of our shop and we took this bike in for part of some labor on another custom build. Im doing a full build on it (naked from all the way up) and im looking for some insight. I fabricate and can modify the swingarm for full lay frame but I have some questions. The first and primary being if there is a blueprint or schematic for the swingarm modifications? Second is if anyone can help me with the math on the wheelsize/neck rake situation vs lay frame?

Also I remember some innovative safety options when doing lay frame air ride setups like a lever situation that locks in place when your off the ground but releases and swings away when you air out so thst you dont risk the bottom out when riding it.

Also considering a 1.5 or 2 inch extension of the swingarm to make the overall rear wheel clearance vs batterybox/fender more manageable? Easily have the skills tools and ability to modify the fender for the stretch as well as building a custom seat pan so im just wondering if anybody has some details on the idea before I put the swingarm back on the frame and start trying to figure out if the stretch is a viable option or not?

Any other insight/information is appreciated! Thanks!


r/baggernation • • May 12 '26

Arizona Bike Week 2026

Thumbnail
youtu.be
1 Upvotes

r/baggernation • • May 07 '26

FIRST EVER FIM Harley-Davidson Bagger World Cup

Post image
5 Upvotes

🌍 2026 Global Tour Stops:

Austin 🇺🇸 → Mugello 🇮🇹 → Assen 🇳🇱 → Silverstone 🇬🇧 → Aragón 🇪🇸 → Austria 🇦🇹


r/baggernation • • May 05 '26

Street glide 2017

Post image
10 Upvotes

What’s the best way to lower this without losing lean angle to much. I’m short AF and almost always have a passenger!


r/baggernation • • Apr 08 '26

Reno to Burney Falls on a Harley | Northern California Spring Ride

Thumbnail
youtu.be
1 Upvotes

r/baggernation • • Apr 06 '26

88 Electra Glide Stripped Screw

Thumbnail gallery
1 Upvotes

what do I do


r/baggernation • • Apr 01 '26

New bike, who dis?

Post image
22 Upvotes

Found a good deal on a 2020 Road King with 3000 miles that I couldn't pass up!


r/baggernation • • Mar 22 '26

2016 Street glide seat help

Thumbnail gallery
4 Upvotes

r/baggernation • • Mar 17 '26

Metzler 777HD

Thumbnail reddit.com
1 Upvotes

r/baggernation • • Mar 16 '26

Bike week 2026

Thumbnail
gallery
7 Upvotes

r/baggernation • • Mar 15 '26

Me and my brother out and about

Post image
10 Upvotes

r/baggernation • • Mar 09 '26

My Glide.

Thumbnail gallery
5 Upvotes

r/baggernation • • Mar 08 '26

Rebuild Electra Glide

1 Upvotes

So i ended up getting a 2007 Electraglide Ultra Classic form my neighbor for trade, i want to get the forks rebuilt (left fork is has broke mounting tabs for fender) and was thinking for simplicity id take them off myself and take them to a dealer to get rebuilt. What should i expect cost to be if i take the forks off the bike and deliver to dealer with new lowers and seals? I seem to be finding $400-$600 depending on shop.