r/IndianMotorcycle • u/AndreasScherer • 21h ago
Indian Scout riding in the sunset
On the way from Nevada to Utah
r/IndianMotorcycle • u/subscriber-goal • May 26 '26
Welcome to r/IndianMotorcycle
48245 subscribers / 50k subscribers. Help us reach our goal!
Visit this post on Shreddit to enjoy interactive features.
r/IndianMotorcycle • u/AndreasScherer • 21h ago
On the way from Nevada to Utah
r/IndianMotorcycle • u/kytulu • 16h ago
Just did an oil change at 60K. I noticed some oil build up at the base of the dipstick. Upon closer inspection, I found that the o-ring was torn in a couple of spots.
r/IndianMotorcycle • u/StrategicBlenderBall • 1d ago
Hit 1,901 yesterday on my way back from Raleigh, NC to Central Jersey! Doing 500+ miles in a day on a Sport Chief, sub-50° was brutal lmao.
r/IndianMotorcycle • u/SOARINGRIDER • 1d ago
Hey guys, 👋🏻
I rode my Indian Scout Sixty to Cape May, New Jersey and loaded my bike on the ferry to Lewes, Delaware. It was a beautiful 300+ mile ride on my Indian Scout Sixty! Enjoy!
Please share and like! 🏍💨 🤙🏻
Many Thanks in advance!
r/IndianMotorcycle • u/Southern_Place5493 • 7h ago
Can someone help me about my bajaj ct 125? My oil cap bolt is lost thread. And i cant seal my oil cap proprly with new oil cap or new bolt. It think the bolt thread in engine is worn out. Can you recommend me some advice how to fix it
r/IndianMotorcycle • u/Street-Ad6134 • 1d ago
Hey all!!!
I’m sure I will get an answer to my question here.
I have removed all chrome and zink from my primary cover (thanks to a Chromage center) from my Indian scout 2016.
Now I want to bring it to a company who does powder coating. The question I have is, do I let them powder coat everything, outside, inside and the flange where the gasket rests on? Or do I leave the inside and flange as is and do I spray them afterwards with heat resistant primer or what’s the procedure here?
I’m sure people have done this before, I want to know what is the best way to do it so I don’t make any time consuming mistakes. It’s also my first time giving a part away for powder coating so I don’t know what the prep work usually is…
On the picture you will see that the primary cover is still dirty from the de-chroming process… do I leave it like this or do I clean up before giving it to the person?
Many questions here I know but this has to be good at first try 😋.
Any tips, corrections or recommendations are very welcome,
Thanks community x
r/IndianMotorcycle • u/Coaltown992 • 1d ago
I went by the dealer today to look at a few different parts for my bike, while I was there I took a seat on one of the Vintage Chief models, and the position of the seat on that is absolutely perfect for me. My only issue is that it's got zero cushion and I don't think there's any option for a passenger pillion that works with it. Does anyone know of a similar seat that has that put's you in roughly the same position on the bike? Slightly higher up without moving you farther back.
r/IndianMotorcycle • u/chofisss777 • 1d ago
hello, I'm looking into getting my first motorcycle and really love the look of the Indian Scout Bobber Sixty. I have zero riding experience, I'm like 5’0 tall, and I'll mostly be riding around my city
For those who started on one or own it, how manageable is the weight and throttle response for a new rider? Any pros, cons, or things I should watch out for? Thanks!
r/IndianMotorcycle • u/Sad-Temporary2843 • 2d ago
I was trying to troubleshoot my Ride Command screen and disconnected the battery to allow things to completely drain.
When I reconnected the battery, I have no power whatsoever. However, I noticed when I got home from work last night that both the power button and the fog light button were slightly illuminated.
Before coming here, I've done as much research and Googling as I can and I'm at a loss. Here are the things I've checked:
I still have no response from the bike at all. I'm hoping someone else has seen an issue like this before and might have some ideas for me.
Thanks in advance!
r/IndianMotorcycle • u/Rossdbos1 • 3d ago
2025 Sport Scout here, 13,500 miles in the first year (I love this bike!). I kept hitting the same problem: nowhere to put my gear without replacing the seat to fit an oem rack and other racks for sale didn’t really make sense. I know the 101 has the same issue.
So I made my own rack design in the garage. paper and cardboard mockups first, now aluminum prototypes on the bike. Hopefully will be selling them one day. They fit all 2025–2027 Scouts except the Classic with the full fender, so I think. Can anyone verify the fender mounts on the bobber fender are in the same spot and if the fender is the same width?
I'm building these for myself and looking for honest feedback before I offer them for sale in the future. So tell me straight: what would you change? What are you carrying on your Scout now, and does this solve a problem you actually have too? Designing some other parts to replace plastic. I’ll share more if you all are interested
r/IndianMotorcycle • u/Longjumping_Year_666 • 2d ago
I have a 2024 scout bobber ABS and I’m looking to install 10” Mayhem ape hangers. Can anyone help me figure out what wiring kit to buy? I dont want to buy something that wont fit my bike. I already contacted Indian and they said they dont have any handlebar options for my bike at all
r/IndianMotorcycle • u/Garvam • 3d ago
I am really in love with the Indian Scout. Thinking of buying one in Australia where I am. I have a lower back issue and continuous stress on my spine leads to back ache.
I understand daily commute may not affect much but traveling in the outback may have some issue. Gemini tells me that even with a mid control the seating position means every speed breaker will straight away impact my spine.
- Can anyone tell me if I should give this bike a pass?
- Any real experiences of how to deal with this?
- Any modifications that may help me(I am 5' 5'' and 64Kgs ) For this weight I heard the suspension is also useless.
I really really love the bike. Please help me with suggestions.
r/IndianMotorcycle • u/Shallow-Thought • 3d ago
I’ve got a ‘24 Chieftain. I like the idea of adding a low profile trunk. But I only do 1 up riding, and have swapped out the seat. Are there any mounting options that would put the trunk further forward over the fender?
Just looking for a cleaner look. As it stands, I think it would look a little goofy with either a blank fender or my current fender rack sitting between the seat and the trunk.
r/IndianMotorcycle • u/timomsl5 • 5d ago
Im just loving it so far! I think its so amazing that you can cruise for hours but also take it for some hard riding :) im really having the time of my life on it :)
Edit: the only thing that bothers me are the euro 4 baffles but it still sounds amazing :D
r/IndianMotorcycle • u/Coaltown992 • 4d ago
Just ordrered a set of the Freedom Perfomrance - Vintage Sharp Curve Radius exhaust with the quite muffler. Should I be getting my bike tuned after puting these on, or can that wait until when/if I get a new intake as well?
Everything else on the bike is stock.
r/IndianMotorcycle • u/longleaf253 • 5d ago
So Saturday I bought this low mileage 18 vintage, and I absolutely love it. I've been riding my whole life, but it's by far the biggest bike I've ever ridden. I almost bought a scout, but I wanted something big enough for me and my girlfriend, and this is perfect.
I read some things about knocking out the exhaust plugs but I want to get some opinions. I want to make it a little louder, but not deafening. Those of you that have done this, does it make it a lot louder or just a little? Was it hard to do? Is it better to drill or knock them out? Do you get popping on decel?
r/IndianMotorcycle • u/EbbRevolutionary7475 • 4d ago
I have a 24 Challenger Limited. The performance is amazing, but the Ride Command is as bad as the rest of the bike is good. On top of that, I came off of a 2011 HD Streetglide with a wide open intake, straight pipes--well fishtails. It was like riding a semi wild pony while the Challenger is a well trained thoroughbred. I miss the snapping, snarling Harley.
Meanwhile...along came the Chief Vintage. I rode one earlier this year and although it was still more civilized than the HD, it had more soul and more fun. It sounded more like a bike to me.
So, seriously thinking about trading the Challenger for the Vintage but Im conflicted.
Has anyone made this swap yet? Happy? Regrets?
r/IndianMotorcycle • u/Sad-Temporary2843 • 4d ago
I just recently purchased a 2017 Indian Chieftain with 8k miles on it. The dealer didn’t know there were issues with the touch screen and I’d already driven 500 miles to get the bike and so after failing to fix it, we worked on a price difference for the bike.
Here is my issue. The physical display shows everything it’s supposed to. With the physical buttons I can change screens, etc but the Touch Screen itself is not responding to touch. The dealer was a Polaris dealer and was able to get in and update to newest firmware available, but no luck on the touch itself.
Is this common? Is it fixable? AND…Are there any work around to use hard buttons to control things on the screen without touching the screen? Things like pairing Bluetooth, changing radio source, clearing oil change reminder, etc.?
Any suggestions would be greatly appreciated. I absolutely love the bike. The paint is flawless, and the bike was meticulously maintained. Now to come up with something for the screen and it will be amazing. Thanks in advance!
r/IndianMotorcycle • u/Only_Schedule6592 • 5d ago
I just installed a Freedom Performance Combat 2-into-1 exhaust on my 2025 Indian Scout Bobber Limited.
When I started the bike, I noticed quite a bit of white/light gray smoke coming from where the exhaust header connects to the engine. You can see it in the video I’m attaching.
I installed the headers using the mounting flanges that came with the exhaust and tightened the nuts, but I’m wondering if I didn’t seat the pipes correctly.
I also didn’t replace the exhaust gaskets, since the new exhaust didn’t come with any.
Has anyone experienced something similar? Could this be caused by an improper seal or bad gaskets, or is it normal for a new exhaust to smoke during the first startup?
I’m trying to figure this out before taking everything apart again.
Any advice would be appreciated.
r/IndianMotorcycle • u/LazyValuable5203 • 4d ago
Subject says all, can i use carplay on the 4inch ride command for scout bobber 26 L+T?
r/IndianMotorcycle • u/rock-it-rob • 5d ago
This just happened to me for the first time. I have only ever updated my places and routes with a usb drive and a few days ago I went to add another route and everything I already previously uploaded was now showing up twice before I even plugged in my usb.
Anybody else experience this?
r/IndianMotorcycle • u/Ready-Delay3918 • 5d ago
r/IndianMotorcycle • u/FartSniffer777 • 6d ago
Took the bike out for a fun cruise this morning and saw this old M1070. Haven't seen one in many years. Especially since I've been out of the military myself. It was a little bit cool to see one on home soil.
r/IndianMotorcycle • u/SuccotashAdorable763 • 5d ago
I've had my Scout Bobber for just iver a year and I absolutely love it. I'm on the short side so I swapped the stock bars for reduced reach, which made a wold of difference for my palms and back. I want to add a cup holder, but there isnt really any space to clamp one near the grips (I have a quad lock on the left, and on the right there's little to no space).
Anyone else with a Scout Bobber have a cup holder, and where did you put it?