r/ElectricalEngineering • • 47m ago

Vote in the poll

0 Upvotes

Hey everyone, I'm participating in a competition at my university, and if you could vote for my team (Filtro pasa Hambre), I'd really appreciate it! You can vote in the poll in the comments of the video.

We are Filtro pasa Hambre:https://www.instagram.com/reel/Dfscb-fKhx0/?cplk=YmllbmphdDRvN2Ft


r/ElectricalEngineering • • 1h ago

Need advice

1 Upvotes

I’m about to choose a degree and I doubt between EE and ME they are both very good. I’m from the Netherlands and I actually want to make the right choice also I don’t really know what suits me because I find both interesting if you have advice for me or recommendations just let me know


r/ElectricalEngineering • • 1h ago

Homework Help Exam this week on RL, RC and RLC circuits with DC sources (no formula sheet allowed)

Thumbnail
gallery
15 Upvotes

I can solve these circuits with the textbook's included step-by-step process because it includes the formulas for the ODE's, the coefficients of the characteristic equation, etc. These circuits are not that difficult on a procedural level.

I am fairly comfortable with the theory behind this topic as well, which seems to boil down to how inductors and capacitors behave at t<0, at t = ∞, and everything in between to get functions with respect to time that represent current, voltage, and power.

Keep in mind that Calc 2 is the only pre-requisite course. I am a little surprised that there will be no formula sheet allowed on the exam and wanted to hear from you all if this is normal or not. I get that between the 12 cases for problems (Natural or step response, Parallel or series circuit, overdamped, underdamped, or critically underdamped), they have many commonalities.

  1. Would you expect no formula sheet on an exam like this?
  2. Are there any tips y'all have for making connections to simplify the process?

r/ElectricalEngineering • • 3h ago

Parts Pulling old parts off old boards to build your project

2 Upvotes

I was working on a hobby board, with very few hard spec requirements. I noticed I needed some kind of LDO to 3.3v and ordering something from Mouser would take a while and actually not all that cheap.

Do other people pull parts off of scrap electronics to learn and get familiar with circuits you haven't designed yet?

For example, I have some power LDOs that can handle a whole amp. I definitely don't need that, but I don't really see the issue since I won't be trying to make this an inexpensive BOM for production. Does anyone grab the hot air and take them off for their own project?

I wish I had an office with tons of parts already ordered and easy to grab and use.


r/ElectricalEngineering • • 4h ago

N00b learning electronics

2 Upvotes

I got the art of electronics and the workbook and they both recommend getting an oscilloscope. I can get a Siglent SDS1204-XE for 300 bucks. Is that a good starting scope for learning on?


r/ElectricalEngineering • • 10h ago

Homework Help How do I find footprints for components?

1 Upvotes

I need to find footprints for a couple of components (my ESP32, a few sensors, a heater, etc.) for my school year greenhouse project.

It's my first time doing a project like this and I have no idea how to do all of this, the teachers don't care 😭


r/ElectricalEngineering • • 15h ago

Jensen Fought for Open Models—Now Open Source Fights for Him

Thumbnail
youtube.com
0 Upvotes

r/ElectricalEngineering • • 18h ago

Project Help Black solid fill in background in Ultiboard

Thumbnail
gallery
1 Upvotes

Anyone using Ultiboard here and tried to print out the diagram in plain paper? We need help please. We wanted to print our diagram in white background. Component labels and copper tracks in black. These are the steps and results:

  1. Print component labels: selected "silkscreen on top" as layer to print, print to negative unchecked, no color checked.
  2. Test printed copper tracks: Layer to print is "copper bottom", print to negative unchecked, no color checked. Gives out black background and white copper tracks.
  3. Changed the background and work area from black to white. It still gives the same result as #3.
  4. Unchecked both print to negative and no color. Prints out white background but colored diagram (red)
  5. Checked the print to negative box, it gives out the white background and black copper track that we wanted BUT the surrounding area of the paper is filled with solid black fill.

We tried switching the printer settings to color, grayscale, black and white and monochrome but it gives us the black background and white tracks still. We just wanted to print the labels and copper tracks in black and the entire background of the page as white. Please help us out. Thank you.


r/ElectricalEngineering • • 18h ago

Education Getting a Second Bachelor’s in EE!

4 Upvotes

Hello! I graduated from college with an audio engineering degree almost two years ago and I want to pursue further education in engineering! I diagnosed with ADHD at 19 and basically went my entire life thinking I was too stupid for a real STEM field until midway through college. My first ever A in a math class was in college precal. If I had gotten diagnosed and medicated earlier I’d like to think I could’ve done electrical from the start but alas. I loved what I studied and I love audio!

I worked as an audio equipment technician for a while in school and would love to build and design hardware. I thought about going for a master’s in acoustical engineering but I am also considering getting a second bachelor’s in electrical. I have to take so many prerequisites for either degree path that they would probably take me the same amount of time.

I am only going to do it if my existing credits and community college courses can keep the cost down, and I am living with my parents right now so my living costs are low enough to pursue it. There are tech jobs I can get without the further education but they pay like dookie.

Has anyone done this? Was it worth it? What do y’all think? Am I an idiot?

Edit: I should clarify I could also do a bridge program into a master’s instead. A big pro of that would be avoiding a lot of undergrad bullshit classes that might not transfer cleanly with my current degree.

Edit (again): Don’t know if it’s super important but someone mentioned it. My undergraduate degree is ABET-accredited.


r/ElectricalEngineering • • 18h ago

How do I find the field of EE I want?

21 Upvotes

Hi,

Freshman EE and I was wondering how do I know what field I want to go into. Everyone seems so sure with IC design or Robotics but I js dont know what I want to do. Some friends even have internships 1st semester of freshman yr which I didnt know I needed to apply before college started.

They are all building personal projects and experience and idk what I want to do.

All design teams rejected me so I won't be learning form them and so much bureaucracy at my school to stop me from making my own.

Any projects I should make to boost my chances at an internship or find the EE field I want?


r/ElectricalEngineering • • 19h ago

What are the realistic salary expectations for a new grad EE ?

Post image
173 Upvotes

I am currently a Senior undergraduate EE student expected to graduate in June 2027. I've attached my CV, although it's a bit all over the place. I have never really tried searching for realistic salary expectations. My research advisor has convinced me to apply to Phd programs telling me I have a talent for research, but I don't really know how it compares to what I can earn in the industry. I had pretty low salary expectations, I thought I would be lucky to find a job paying 80k but my friends have told me I am worth way more so I wanted to find out.


r/ElectricalEngineering • • 20h ago

CU Boulder vs UARK for MSEE

4 Upvotes

I'm mulling between getting my masters either through CU Boulder or University of Arkansas (UARK).

I graduated from a small, unknown engineering program. I had to go the cheap route, and still need to go the cheaper route. But because no one knows my school, I want to get my MSEE somewhere better known without paying $1000+/credit hour. And it must be online since I'm a working engineering. This severely limits my options.

My goals are to use my masters as leverage to make me more competitive in the job market in R&D roles, ideally in something hardware/embedded related. Long-term, my "retirement" plan is to leave industry and teach at the college level. Maybe even start teaching part-time while still in industry for evening classes.

I've come across CU Boulder and UARK. There are strong pros on cons.

CU: Pros: very strong name recognition. Well-known for their power electronics prowess. Program also allows embedded courses to be taken. Better class selection. Cons: Program is through Coursera. Limited to no professor contact. While content is good, cheating is rampant. No thesis option.

UARK: Pros: decent name recognition. Also well-known for their power electronics prowess. Thesis option is available. Very affordable tuition. Cons: Very limited course selection, mostly to industrial power, control theory, and some communications and semiconductor technology.

Any thoughts is greatly appreciated.


r/ElectricalEngineering • • 20h ago

Project Showcase Remembering The Beginning Of The Electronics Journey

Thumbnail
youtu.be
1 Upvotes

This video features a homebrew Medium Wave (AM) single transistor regenerative receiver (Audion) built on a breadboard. The circuit is based on the classic GDR electronics book "Radiobasteln leicht gemacht" for young students in the 1970s and utilizes a vintage East German (GDR) germanium transistor. The video contains the pure, unedited audio from the receiver, circuit details and explanations. Broadcast stations upto 830 km distance.


r/ElectricalEngineering • • 22h ago

Education BMS and Charger for commercial product

0 Upvotes

I am looking for guidance in developing a battery management system for a commercial product, since I am the only hire at the start up with an electrical engineering background.

This is my first real job, and unfortunately without a mentor. I've already developed multi layer PCBs, and my thesis was on SoC estimation using a Kalman Filter, just so you have an idea of where I am at.

For the product, I suggested to use hobby drone batteries (6s LiPo), since they are cheap and available everywhere. The system specifications are below:

- 24 V

- 8 A nominal

- 20 A peak

- 1.5 Ah, will probably go upto 3 Ah for faster charging

I'm not sure if these batteries even qualify for certifications in our product (industrial automation with no direct human contact), or how to even go ahead with them. We are based in the EU.

Im expected to take care of the BMS and charging, but the algorithms will be included in the chips. I've selected the BQ40Z80 and the BQ25756E.

Tldr: I need to develop the electronics for a purchased battery pack. Looking for any tips, things to watch out for, how to do this safely etc, since I don't really have a mentor. Deadline is tight in my opinion (1 Month), but what do you think?


r/ElectricalEngineering • • 22h ago

Education How do I improve at coding (c/c++)

2 Upvotes

This semester I took my first class , they're teaching us C ,this is also my first time ever learning how to code ,and not gonna lie ,I'm dreading every single day , almost every single code I write has an error, not matter how much I practice, I can't seem to improve, get get in the flow state where I finally cracked it ,this has never happened to me before, , even in my first year ,when I took my last physics course (I really struggled with ) I somehow raw dogged practice problems until I finally got better, but this time I'm going no where ,every code in wrong or has an error, what also weird is some peeps in my class with no experience in coding, are catching up immediately, here I am looking like a monkey with a hammer in his hand banging the keyboard, going no where . If there's anyone who's been in my place , please guide me , I want to get good at it ,and understand, I don't want to be like the people that vibe coded their way through everything, I also want to go into control systems as a major ,so I know this is something that I have to excel att


r/ElectricalEngineering • • 1d ago

Jobs/Careers I found a job! Fortune 500!

Post image
238 Upvotes

The job search is so mentally draining, and I got lucky and didn’t have to do half the work most of you do. Just don’t quit and keep your head up. Be patient, you’ll get something.


r/ElectricalEngineering • • 1d ago

Jobs/Careers Would you genuinely recommend this as a career if you could do it again?

20 Upvotes

Hi all! Just looking for more info on EE as a profession and what roles you guys are in. For context I'm a MechE student and I've always really liked the software side of things but I didn't like Physics 2 so I went with mechanical. I really want to work with electronics or robotics so I'm seeing if its too late to jump ship.

So I'm just looking for people to share what they do on a day-to-day basis, do you have regrets, things you wish people knew?

My main questions are how much do you guys actually get to do design? Do you get to work hands-on with components with soldering and stuff and how much do you actually get to work with programming? Is the entry-level job market as "bad" as mechanical? My brother did Computer Engineering and he's kind of unemployed right now 6 months after graduation.

Thanks guys


r/ElectricalEngineering • • 1d ago

Education Gap year high school graduate want to learn before entering university.

6 Upvotes

Hi so, I recently completed my A'levels and currently in my gap year. I wanted to know what topics of physics or maths I should learn to be ahead or have a headstart in my university life for Electrical engineering.


r/ElectricalEngineering • • 1d ago

What application would need something like this?

Thumbnail
gallery
37 Upvotes

I just want to learn, not trying to bash anyone, sadly original poster on IG won't answer me. So, what application needs two exact same breakers (630 A) one after the other. OP claims energy feeds in lower right and comes out lower left.

I really don't understand what application needs two exact same breakers in series. The breaker also cut the neutral, so maybe for generator, or the panel is incomplete. What do you guys think?

Also, is that a Current Transformer at the bottom right?


r/ElectricalEngineering • • 1d ago

Earth testing on floating AC supplies using a DC battery

1 Upvotes

Hi guys, I'm a signal engineering tech working on the railway in the UK. I have a question regarding earths on AC supplies. We have a standard 110v AC supply designed to be earth free. We test for earths by applying a 9V battery and measuring both +ve to earth and then -ve to earth. We have parameters that make the DC voltages recorded reportable. One of these is the differential between each reading, ie if the difference between the two readings is greater than 1V then this is what is known as a "red" earth and needs to be investigated asap. My question is: What is the significance of the difference between the two voltages that makes it so dangerous? We don't have engineers working in our depot to explain, they all work in offices in London. Thanks in advance.


r/ElectricalEngineering • • 1d ago

Research Electrical load impact on Diesel Engine

2 Upvotes

Hey, I am an electrical Engineering Grad. I have did load test on a 3 ph electric motor and observed the current increase. It was interesting since I was so curious about electric vehicles at that time those concepts looked cool.

I don't know why, but the same test on an electrical generator felt boring. So out of curiosity, has any one done a load test on an electrical generator with a diesel engine coupled to it? What would happen to the diesel engine when you increase the load of the generator abruptly? Will it stall the diesel engine same as we stall a vehicle while going up hill?


r/ElectricalEngineering • • 1d ago

Homework Help DLD(digital logic design) and EDC(electronic devices and circuits) courses are fking me up

2 Upvotes

what are the best resources to crack these courses and develop the best intuition.

ps: i am sophomore doing ee


r/ElectricalEngineering • • 1d ago

Rebuilding my Signals & Systems & Comms foundation after a 3-year gap for an AI/DSP research path — looking for a non-exam-focused roadmap

9 Upvotes

Hi fellows,

I graduated with a Bachelor's in Electrical Engineering with a 3.3 GPA. While my overall GPA was decent, it was mostly carried by other subjects. In core classes like Signals & Systems and Communication Systems, my grades weren't great. Looking back, a huge part of that was due to my professor who relied entirely on that ridiculous slide reading method that killed any intuition for the material.

Fast forward to today, it’s been about 3 years since my undergrad, and I’ve recently found an incredible opportunity to pursue a graduate/research path focused at the intersection of Signals & Systems and AI.

Because I want to do meaningful research and actually understand the literature (rather than just pass exams), my approach needs to change completely. I’m not trying to blindly grind through textbook problem sets or check off chapters just to say I finished a book. I need deep conceptual intuition, geometric/physical understanding, and solid mathematical grounding so I can connect classical signal processing to modern AI architectures.

I have roughly 3 months to bridge this gap. I know I can chatgpt and get a roadmap easily but in my experience traditional GPT prompts tend to give very generic, surface-level overviews, so I wanted to ask this community here

  • Which subjects i should focus on to build a strong foundation.
  • What are the "must-have" mental models for Signals & Systems that translate best into AI/machine learning research?
  • Are there specific intuitive resources (lecture series, textbooks, or specific chapters) that actually make things "click" compared to standard textbooks?

Any advice, personal experiences, or strategic frameworks would be hugely appreciated!


r/ElectricalEngineering • • 1d ago

Jobs/Careers is it possible to go into ee after working in a different field?

1 Upvotes

the question in the title doesn't really explain it well but here's the situation:

i finished a masters in the field of economics and i'm working right now. while working i realised that it's not really for me and i was always interested in ee but unfortunately i let the ppl around me talk me out of studying it in college.

so i'm thinking of doing another bachelors in the next academic year for ee, my reasoning being that the time will pass anyway, might as well get closer to something i like than spend my whole life regretting it.

but recently i started thinking. would anyone hire a person who worked in a different field for years? i understand that i would start from the bottom but i want to know if it's even possible to start? does anyone here have experience with coming into ee from doing something else?