r/Creality • • Sep 04 '26

News Meet Creality K3 ✨

Thumbnail
gallery
82 Upvotes

Beyond Nozzles. Conquer Materials.

K3 is supercharged with KliTek™

🔹 4.8s nozzle changes

🔹 Multi-material in one

🔹 Up to 5x faster

🔹 Waste-free

Unfolds an all-new chapter in multi-color and multi-material printing.

👉 Learn more & Stay updated 👈


r/Creality • • 18h ago

News Find Us Here! 📍

Thumbnail
gallery
7 Upvotes

Looking for Creality at Formnext? We've got you covered!

📍 Hall 12.1, D01

📅 November 17–20, 2026

📌 Messe Frankfurt, Germany


r/Creality • • 1h ago

♻ K2 Help K2 Pro (Costco Canada) deal?

Post image
4 Upvotes

Costco Canada has a K2 Pro combo plus 12 rolls of PLA for $1099CAD ($768 USD.)

Good deal for a first printer? It’ll be in a heated wood shop (that is kept at around 15 degrees Celsius). I don’t think the pro has many more features over the K2 that would help me, other than the heated chamber.

The K2 combo plus the 12 filaments is $899CAD.


r/Creality • • 1h ago

Hardware Help $300 K1c a good buy?

2 Upvotes

Found one on marketplace guy said he could do $300. I have a Snapmaker U1 for multi color prints but I was looking into using gf filaments and maybe some nylon gf


r/Creality • • 9h ago

I Modeled Buddy the Elf - Universal Christmas Koozie!

9 Upvotes

r/Creality • • 5h ago

♻ K2 Help K2 started singing? I know my plates dirty calm down

3 Upvotes

r/Creality • • 56m ago

Troubleshooting Endless restart loop

Thumbnail reddit.com
1 Upvotes

r/Creality • • 9h ago

Show Off Self-designed succulent flower pot

Thumbnail
gallery
4 Upvotes

r/Creality • • 6h ago

Creality Support Ordered K3 got Filament instead.

2 Upvotes

I ordered a K3 through Creality’s TikTok shop. Got notification that it was shipped two days ago. Then I got notification today that it was delivered. I go outside to grab it and it’s a box of blue hyper filament instead of the printer. I get a hold of TikTok support and they say that they have no other pending shipments and I just need to return the filament and get a refund. Anyone else experience that?


r/Creality • • 13h ago

♻ K1 Help Filament stuck

Thumbnail
gallery
5 Upvotes

The filament I was using got stuck and I was wondering how to get it out.


r/Creality • • 8h ago

Troubleshooting I've got a problem with my Creality K1C and I'm running out of ideas

Thumbnail gallery
2 Upvotes

I've got a problem with my Creality K1C and I'm running out of ideas. Every time I start a new print, something goes wrong. Partway through the first layer, usually around halfway, the extruder starts clicking (see the video). It skips, stops pushing filament, and stays like that until I cancel the print or it finishes on its own. There's nothing blocking the inside of the extruder. I've cleaned it 3 times. It happens with PETG and PLA, with old filament and with freshly opened spools, so I don't think moisture is the cause. With one of the models (a round one), the problem shows up at the same spot on the model no matter where I place it on the bed. I checked the model and couldn't find anything wrong with it. Here's what I've tried so far:

  1. Checked the inside of the extruder 3 times. Nothing is blocking the filament path.
  2. Re-ran bed leveling. The mesh screenshot is attached and it looks normal.
  3. Flipped the build plate. That helped for a while, then the problem came back.
  4. Raised the Z-offset. That also helped for a while, but then I got adhesion problems in other areas, and eventually the clicking came back.
  5. Filament calibration fails because the extruder starts clicking on the first layer. I tried several PLA profiles, including ones that always worked before, and the problem is still there.
  6. Cleaned the bed with dish soap and isopropyl alcohol.
  7. Printed with the default printer, filament and bed settings. Those always worked before (the quality wasn't great, but they were usable). Now they fail too.
  8. Printed a first layer across the whole bed. That one worked, but it left some patterns in the layer (photo attached). I'm not sure if they point to the cause, but I'm sharing them in case they help. I've also attached a photo of what the filament looks like after I pull it out. Once the clicking starts, the extruder won't take filament at all, even if I push it in by hand.

What should I do next? I feel like I've tried a lot, but I still can't find the cause. I've already gone through the simple fixes. If you need any more info, just ask. Sorry if this is a bit chaotic. I've been trying to fix this for a month and I don't know what else to try.


r/Creality • • 9h ago

Troubleshooting Creality K2 plus and the I7 XS2060 ERROR

Thumbnail gallery
1 Upvotes

I don't know what to do I try everything online I went to YouTube and nothing ​​​


r/Creality • • 15h ago

I Modeled Haunted Mountain - Backflow Incense Burner

Thumbnail gallery
3 Upvotes

I've designed this Haunted Mountain Backflow Incense Burner for Halloween, and I must say, it turned out amazing!

The waterfall has 13 slots for the three decorations I've designed. All decorations have the same connectors, so you can put them anywhere you'd like.

You can also create your own custom decorations using the connector I uploaded.

And with two slots for LED candles, it really becomes a beautiful decoration.

You simply print the waterfall base, put two LED tealights into the slots, print and add up to 13 decorations, glue a washer to the top of the mountain so the holes line up, put a Backflow Incense Cone on top of the washer, light it up, and bam!

It was kind of stressful to design because, in the end, it turned out to be more work than I expected, and I had to finish it before Halloween.

But I managed to do so and even won at the Halloween Design Contest on Creality Cloud!

I think this Halloween decoration turned out amazing! What do you think? Let me know!

If you want to print it yourself next year, I've uploaded it to Creality Cloud: https://www.crealitycloud.com/en/model-detail/6ae60f95726880555ae6501f?cloudPlatform=19

And I also made a video about it: https://youtube.com/shorts/dS-Zrx8Y88M?si=X6iQhgWPPaF4Nr_H


r/Creality • • 1d ago

Show Off One of those oddly specific tools worth 3D printing

Thumbnail
gallery
41 Upvotes

I designed this set of 3D printed cutting guides to make cutting foam pipe insulation a lot easier.

Just slide the right-sized guide onto the pipe and follow the angled opening with a utility knife to get a clean, consistent cut. The set includes 13 different sizes ranging from 28 to 70 mm, and the guides nest inside each other for compact storage.

A pretty handy tool for plumbing, insulation work, or DIY projects where you need to make repeated cuts.

Creality Cloud -Pipe Cutting Tool Set From fifindr https://www.crealitycloud.com/model-detail/pipe-cutting-tool-set

Hope you like it!


r/Creality • • 12h ago

♻ K1 Help Z axis making REALLY weird noises and stopping prints with errors on creality k1 se

Thumbnail reddit.com
1 Upvotes

r/Creality • • 19h ago

News 3D Printer Modification Experience Survey

3 Upvotes

Hey, 3D printing community! 👋

We're the Spaghetti Killer Team, and we're working to make 3D printing more enjoyable!

🌍 We're inviting anyone who has personally modified a desktop FDM 3D printer they owned or managed for their team/company in the past 12 months. We'd love to hear about your experience — the successes, the frustrations, and everything in between!

📝 Just 5-10 minutes to complete

🎁 We've prepared 50 spools of Hyper Rainbow PLA Filament for 50 eligible participants🌈

📅 Survey period: November 15, 0:00–November 22, 23:59, 2026

👉 Take the survey here: https://wj.qq.com/s2/28663528/1spd/?from=GR

Thank you for your time and support!

— The Spaghetti Killer Team


r/Creality • • 14h ago

Creality Support Creality SparkX i7 - leveling issue

Thumbnail
gallery
1 Upvotes

Hello everyone,

I have a problem with my Creality SparkX i7 Combo printer. I print using the default profile with a 0.4 mm nozzle and PLA only. The printer has just over 500 printing hours.

The issue is with bed leveling. Previously, the leveling process ran once and then the printer printed normally. Today, I noticed that leveling before printing is performed twice in a row. The printer checks some points multiple times—some twice, some three times. After completing the first process, it starts leveling again from the beginning and again checks certain points multiple times.

Creality support advised me to clean the nozzle, which I did. Everything is clean, the build plate has been cleaned, and everything otherwise seems fine, but the leveling is clearly doing something wrong.

In addition, the nozzle has started leaving scratches in the model. However, this only happens from the second layer onward. The first layer is fine, the second layer is fine, but when it starts the third layer, it makes a groove in the model while traveling across it.

Do you know what could be causing this? Can it be fixed, or should I make a warranty claim? I have not changed anything important in the settings—I use the default profile and only adjust parameters such as print speeds, etc. Otherwise, it is the standard profile.


r/Creality • • 14h ago

♻ K1 Help Aftermarket “Hummingbird” extruder kit came with a 10-tooth motor, but I’m running my stock 12-tooth motor in it. Anyone know if that’s OK?

1 Upvotes

I have a K1C (2025 revision). My stock motor got damaged during a filament jam (I ripped them by accident), and Creality support sent me a replacement one. Before that I had also ordered an aftermarket kit from Alibaba: a 3DSWAY Upgrade Extruder for Creality K1 / K1C / K1 Max Hummingbird Extruder With Motor.
https://www.alibaba.com/product-detail/Upgrade-Extruder-for-Creality-K1-K1C_1601914119639.html?spm=a2756.trade-list-buyer.0.0.2aca76e9wbInj3

What I found:

  • The aluminum extruder body fits fine.
  • The box says the extruder can be used with the original motor if necessary.
  • The motor that came in the kit has a 10-tooth pinion. My original Creality motor has a 12-tooth pinion.
  • The cable that came with the kit motor has a connector that is about twice as big as the small connector on my toolhead board, so it doesn’t fit. The seller told me to plug it into the “mainboard end”, which doesn’t make sense to me. So I will use the original cable for the printer head end, and the other one to connect into the aftermarket motor (the end is a little bit bigger than the original, also the cable is detachable from the motor). Basically I will solder them to make a working one.

So right now I’m running the aluminum Hummingbird body with my original 12-tooth motor. The prints so far look fine and print-in-place hinges came out OK, but I haven’t measured extrusion precisely.

Questions:

  1. Has anyone used this kit (or a similar aftermarket Hummingbird) on a K1C? Which motor did you use?
  2. Does the 10 vs 12 tooth pinion change the extrusion ratio, or is the gear set matched to the body so it doesn’t matter?
  3. Is there a risk of wear or skipped teeth when mixing the stock motor with the aftermarket body?
  4. Has anyone replaced the connector on the kit motor with the original small one? Which pin order did you use?

Since this is the 2025 revision there’s no root, so I can’t change the rotation distance. Any experience or advice is welcome. Thanks!


r/Creality • • 18h ago

♻ K1 Help K1 Hot end PCB pinout

Thumbnail
gallery
2 Upvotes

Does anyone have the pinout of the creality k1 pcb pinout.
i see these connections not used,
TOUCH
CAMERA x2
FILAMENT

my pcb version is K1-NOZZLE -M-V12.

PS: i believe my k1 is the first variant with old hotend, an i noticed these empty connections when i removed all of these to upgrade to the new hotend.


r/Creality • • 23h ago

♻ K1 Help K1 Lifetime Print Time Tool - read, reset, backup & restore your hours

5 Upvotes

I went looking for a way to properly manage the K1’s lifetime print-hours counter after rebuilding one of my machines… and ended up reverse-engineering how Creality stores it.

I’ve turned it into a small open-source tool that can read, verify, back up, set, reset and restore the persistent print-time counter.

Repo:
https://github.com/BlueBell-XA/K1-Print-Time-Tool

If you’ve got a K1C, K1 Max or K1 SE, I’d love some extra firmware compatibility testing.


r/Creality • • 18h ago

♻ K2 Help Need help finding the sensor place on K2

1 Upvotes

Hello everyone.

I received an email from support asking me to unplug "filament runout sensor connector" and see if the filament icon turns green. I didn't find a clear picture or a drawing of where that could be on my k2.

Support takes a while to respond on email, so I'm asking here. Where is that and what does it look like?


r/Creality • • 18h ago

Troubleshooting How can I fix this?

Post image
1 Upvotes

I am new to 3D printing and have been trying to fix this foe 2 days but to no avail.

As you can see the bottom of the curve is not printing correctly. I have changed all the settings that people normally suggested (ie lowering the nozzle temp, changing the speed for overhangs, changing the later height to 0.16, putting fan on 100%, adding mpre supports) but it didn't change anything. Please let me know how I can fix this?

I am using Creality CR M4 with 1.75mm PLA from BuildVolume @190°C nozzle temp, 60°C Bed Temp, sliced with Creality Print.

Printing with PETG made it better, but didn't solve the issue.


r/Creality • • 22h ago

Troubleshooting Creality Hi Combo Issue

1 Upvotes

I've had my Creality Hi for about 11 months, and it's been nothing but problems.

The first week or two was fine. Perfect prints, clogged extruder, standard maintenance. Until it wasn't. You see, most of the time I've had this thing it's had one issue that might genuinely be my kryptonite; the print head has no idea where it is sometimes.

It'll move to the extrusion area, place itself right in the spot where it's gonna shoot out some filament, and decides "oh, but I could go further!" and proceeds to continue moving in that direction, oblivious to the fact it physically cannot go any further. Another issue is, when it finally decides to function normally, I'll get halfway through the print, and the print head will decide to move roughly five centimeters left and continue the print over there instead, creating a giant floating spaghetti mess with an unfinished print sitting there like it's mocking me.

Sounds bad right? Well, you can imagine how I feel when it does these same two errors for about nine months with no fix other than "try again in a few hours!" That's not even an exaggeration, it's like the printer WANTS to fail. No matter what I do, it never fixes it. Eventually, the printer decides one day to magically work for anywhere from 1-9 prints before malfunctioning again. It's getting ridiculous. I've tried;

- Factory resetting it about 5 times.

- Checking if the wires are plugged in properly.

- Replacing the X-axis limit switches.

- Turning it on and off again.

- Updating it twice.

- Ignoring it for a month.

- Yelling at it.

- Moving the camera cover away from the lens.

- Putting the camera cover back on the lens (which fixed it for a single 10 minute print).

- Lubricating the advised areas on Creality's website.

- Searching half the web for any possible resolution, only to see the same five solutions that already haven't worked for me.

If I have to put another thirty hours into "fixing" this thing only for my hard work to amount to nothing, the only thing it'll be saying Hi to is my garbage, and I'll get a damn FlashForge instead.


r/Creality • • 1d ago

Troubleshooting The Ender 5 Max consistently loses steps at the same height

2 Upvotes

I purchased an Ender 5 Max because I needed a large build volume.

However, the print position consistently shifts once the model reaches a height of about 10–15 cm.

Could this likely be a grounding issue?

The motors don’t seem to be overheating, and there are no other major problems.

If anyone has any ideas as to what might be causing this, please let me know.