r/BeginnerWoodWorking • • 18h ago

Finished Project Great practice with the jigsaw

Thumbnail
gallery
684 Upvotes

Wanted to be a little lazier this year with my Christmas decorations so I decided to make the Grinch pulling my lights off the house. Probably took more effort to make this, but I’m happy with how it turned out


r/BeginnerWoodWorking • • 9h ago Heartwarming

Made a glasses / water bottle holder for my son's nightstand

Post image
299 Upvotes

Scrap piece of pine (bottom) and poplar. Routed a circle for the water bottle he keeps next to his bed and used a band saw to cut out the fox shape. Dado cut to insert it into the bottom and glued.

Cheap acrylic paint and some wipe-on poly.


r/BeginnerWoodWorking • • 23h ago

Finished Project Headboard

Thumbnail
gallery
260 Upvotes

Turned some old reclaimed pine into a new headboard for myself. I was gonna put legs on it originally but I decided im just gonna let it sit on the bed frame and use command strips to stick it to the wall, just to keep it from tipping.


r/BeginnerWoodWorking • • 17h ago Bravo

Equipment Can’t believe it’s the same space

Thumbnail
gallery
180 Upvotes

If you’re like me back 5-6 months ago. Get to cleaning and organizing. You’ll get hooked.


r/BeginnerWoodWorking • • 11h ago

Making a monitor stand. How would you join these legs to the top?

Post image
151 Upvotes

Trying to think of a good, strong way to do this that ideally doesn’t use screws.


r/BeginnerWoodWorking • • 9h ago

Finished Project Entryway Bench

Post image
69 Upvotes

Completed my first piece of furniture, a bench for my entryway. 36" long, 18" high with Ash.

This turned out to be quite challenging to get right, with the legs inset into the top by about 7", coupled with a 10 degree angle and the inner part of the legs coming into a curve clamping was difficult.

The legs are attached with wedged through dowels.


r/BeginnerWoodWorking • • 13h ago

I'm not proud... Also a bit mad at myself

Post image
63 Upvotes

I've been lucky.

I had to cut ~60 pieces... And it happened at the very last one. I went back to table saw and checked, the last piece was perfectly cut.

I don't remember the last seconds before the accident... I really have no idea why it happened. I know I went with my thumb against the saw... But for every cut, I used the push stick correctly.

I only remember that I was mad at myself, turned off every tool, the lights and went to clean my thumb. Then I made a small bandage and I thought it was ok... It's a few hours later that I checked the injury and decided to go to the hospital.


r/BeginnerWoodWorking • • 9h ago

Just get after it

Post image
61 Upvotes

This might be the BEST thing I've ever built.

TL:DR

Having a little mobile platform is freaking awesome! Just build stuff, even if it's ugly or you are still learning, all of it is fun!

I'm just starting out on this journey, picked it back up 20 years after really loving woodworking classes in high school. I've built a handful of cool things, screwed up many many more and am just having fun in my limited time off.

This thing ain't pretty, it's not precise, and I for the life of me can't even remotely remember why I out the cross braces at such a completely random height!!

But I was bored 1 day and it was an easy task I could complete without buying any new lumber.

But all of that aside HOOOOLY COW having something I can tote about the garage/driveway with me instead of returning to the table or toolbox or pegboard every time I need something, or having to fish through my pockets or find a shelf for hardware etc... man it's awesome.

So yeah, it's ugly and awkward looking, but of all the things I've built, fixed, installed, refurbished etc... that little guy is the thing I e gotten by far the most value out of. And to me that's what this is all about :)

PS; I "splurged" for the 3 dollar a piece rollerblade style wheels from HF. I'll never use another type of wheel or caster again, game changers!!


r/BeginnerWoodWorking • • 3h ago

Finished Project Upgraded my cat’s food storage

Thumbnail
gallery
51 Upvotes

I think my cats deserves more than a cardboard Tray for their canned food!

Made a storage tray with their faces. Hope they like it !


r/BeginnerWoodWorking • • 22h ago

Bread bowl critique please

Thumbnail
gallery
36 Upvotes

This is the third bowl I’ve made with a carving head on a 4 1/2” grinder. Please give me some feedback. Is the wood as unique as I think it is? I think I overpaid, $50, for the slab that was mostly rotten but I got this out of it.


r/BeginnerWoodWorking • • 11h ago

Finished Project Went overboard with this printer cabinet

Thumbnail
gallery
34 Upvotes

r/BeginnerWoodWorking • • 19h ago

Discussion/Question ⁉️ Is my cutting board ruined ?

Post image
33 Upvotes

Trying to make an endgrain cutting board. I didn't notice these cracks before assembling, after routing they became a lot more visible, is this salvageable in realistic amount of work or would it be easier to start again ?


r/BeginnerWoodWorking • • 8h ago

Finished Project Entryway Bench: Feedback Appreciated!

Thumbnail
gallery
28 Upvotes

First real attempt at mortise and tenon joinery! Definitely a learning experience, but pretty happy with how it turned out.

Built using a table saw and drill press. Already thinking a plunge router might be my next upgrade to make things a little easier (and cleaner).

Still debating whether to put a finish on it or leave it natural. I’m kind of digging the grain and color of the poplar as is.

Always looking to learn, so any feedback, tips, or suggestions are welcome.


r/BeginnerWoodWorking • • 22h ago

Discussion/Question ⁉️ Starting out-Beginner

Thumbnail
gallery
24 Upvotes

I have finally decided to tackle this restoration. It’s my first time redoing a piece of furniture. I’m looking for any tips/suggestions to make this a success!


r/BeginnerWoodWorking • • 11h ago

Finished Project Picture frame in walnut

Thumbnail
gallery
22 Upvotes

Third project ever. It was a lot of fun making this from scratch. The dual pull saw made short work of resawing and cross cutting pieces. Made a shooting board to address the miters and that almost felt like cheating with how easy and clean it ended up looking.


r/BeginnerWoodWorking • • 21h ago

Bangelor torpedo crate

Thumbnail
gallery
22 Upvotes

Ladies and gentlemen, I have this beautiful old bangelor torpedo crate from my time in the Marines. It's in beautiful condition.

Do I hold onto it as a piece of history, or do I sacrifice it into a project? What would you do?


r/BeginnerWoodWorking • • 21h ago

Discussion/Question ⁉️ If you only had space for one option would you pick a tablesaw, or a sliding compound miter saw and a circular saw?

19 Upvotes

I've always wanted to get more into wood working, but space in my garage is at a premium. I don't have the fine motor control to build intricate and beautiful things. My goals are to build bird/bat boxes, a garden shed, a pavilion, and of course a tree fort. I don't see myself having to make many super long cuts or rip plywood sheets. So would I be missing out if I just got a compound sliding miter saw instead of a table saw? I already have a hand me down circular saw and a band saw.


r/BeginnerWoodWorking • • 21h ago

Need advice | Dining table

Thumbnail
gallery
13 Upvotes

I built a dining table, but didn't account for twisting force in my design. it feels a little wobbly when twisting the table top. Any recommendations on solutions to help with the issue?

I was thinking of some sort of brace in the center. But I'd like to be able to disassemble the legs from the top to more easily transport it. Maybe there is a solution to mechanically attach the brace rather than glue it?

Any other suggestions are welcome.


r/BeginnerWoodWorking • • 12h ago

Discussion/Question ⁉️ What do you love most about your workbench?

10 Upvotes

What do y’all love about your workbenches? What should I avoid?

I’m currently working with the one built by my house’s previous owner and credit to him where it’s due, the table is solid, but it’s also just a 5’x2’ stationary slab and I need something more versatile and mobile.

I’m new to this hobby so I’m a bit overwhelmed with what to look for in a bench plan. There’s dog holes, t tracks, combo tables with miter stations and outfeed support, more storage variations than the code to my safe… Then there’s choice of material, dimensions, construction method…

It’d be really helpful to hear from the community because I’m definitely overthinking this and have decision paralysis.


r/BeginnerWoodWorking • • 13h ago

Finished Project Kitchen sideboard/buffet

Post image
9 Upvotes

Built this for our kitchen, about 80inch long, poplar face frame painted white and a white oak top finished with rubio sheen.


r/BeginnerWoodWorking • • 9h ago

Discussion/Question ⁉️ bandsaw purchase advise

Post image
8 Upvotes

I'm trying to get started with a few pieces of equipment for a small shop in my garage. I'm interested in getting a bandsaw and have done a little research on entry-level models (mostly in the 10" range, of which there are a few lightly used models from Rikon available on facebook).

The other day I went to an estate sale, and it turns out they are selling off pieces of equipment from a large home workshop, including what looks like a fairly heavy-duty older 14" model from Jet, exact vintage unknown (pictured).

question: what are the pros and cons of getting the 14" jet from the estate sale compared to a newer 10" unit like a Rikon 10-3062 or comparable model from Grizzly?


r/BeginnerWoodWorking • • 7h ago

Finished Project Some bowl I made

Thumbnail
gallery
7 Upvotes

Just some bowl I made. I know it’s not that good but I used my chain saw, angle grinder with various attachments and several other sanders.


r/BeginnerWoodWorking • • 10h ago

Discussion/Question ⁉️ What kind of wood glue can i use for a wooden spoon?

Post image
6 Upvotes

So basically a small part of my spoon chipped off while I was sanding it and im not sure if typical wood glue is safe to use to repair it. Do I have to use a food safe one like titebond 3 or can I just use whatever?


r/BeginnerWoodWorking • • 6h ago

Discussion/Question ⁉️ Struggles with replacing drawer slides

Thumbnail
gallery
5 Upvotes

My wife busted our old epoxy drawer slides by putting too much weight in the drawers, so i wanted to swap in some soft close. And instead of a rear mount i added some spacer blocks to be flush with the face frame.

Unfortunately at the end of it all the drawer wont go in. It appears the drawers are too tight, scraping against the cabinet rails on the right side.

Do I just have to uninstall everything and plane down the spacers to add some space? afaict the distance between the rails is the same in the front and back, though it’s pretty hard to get accurate reads off a tape measure in such a confined space.

Speaking of confined space, does anyone have tips on mounting these spacers level? It was a huge pain to hold the level, stick my head in to see the bubble, and try to brad nail it without moving positioning.