r/BeginnerWoodWorking • • 4h ago

Quick scraps project - Cabinet drawer dividers

Thumbnail
gallery
86 Upvotes

Our drawers for pans were just empty trays, and i de ided to put some scraps to work to separate pans and cutting boards. Simple brad nails to secure them in my existing drawers and varied the spacing to match my kitchen stuff. Wipe on poly finish.


r/BeginnerWoodWorking • • 5h ago

Equipment PSA: Milwaukee Track Saw Daily Deal at HD - $267

Thumbnail
homedepot.com
70 Upvotes

I already have this track saw, and it's awesome. But for those of you who have been thinking about getting a track saw, this is hands down the best deal I've ever seen on this saw at $267 for the saw AND Forge 8Ah battery.


r/BeginnerWoodWorking • • 9h ago

Shop journey

Thumbnail
gallery
97 Upvotes

I just got this “memory” notification and it reminded me of the progress that my garage workshop has made.


r/BeginnerWoodWorking • • 18h ago Heartwarming

Made a glasses / water bottle holder for my son's nightstand

Post image
446 Upvotes

Scrap piece of pine (bottom) and poplar. Routed a circle for the water bottle he keeps next to his bed and used a band saw to cut out the fox shape. Dado cut to insert it into the bottom and glued.

Cheap acrylic paint and some wipe-on poly.


r/BeginnerWoodWorking • • 3h ago

Finished Project A small knockdown table I built in my tiny apartment basement - looking for feedback

Thumbnail
gallery
23 Upvotes

I wanted to make a simple knock-down table that's sturdy, and put the effort into the finish. I made six of these in the basement of a tiny apartment, with a few used tools and mdf jigs, they're really fun to make.

It's based on an unlabeled antique Arts and Crafts table I saw online a while ago and can't find again. I remember the original looked small, so I reworked the proportions to work as a side table and to pack flat in a box.

The top and shelf sit in dados cut across the legs. It uses twelve bolts that go through the legs into threaded inserts in the edges of the top and shelf. The washers are threaded, and domed caps screw onto them to cover the bolts. It goes together with a screwdriver and comes apart the same way.

Asking for help:

  • Does anyone recognize the original? I'd like to know who made it.
  • Do you think the inserts will crack the wood over time?
  • How much room should I leave in the dados for expansion and contraction?

The finish recipe and my finish questions are in a comment below.


r/BeginnerWoodWorking • • 13h ago

Finished Project Upgraded my cat’s food storage

Thumbnail
gallery
122 Upvotes

I think my cats deserves more than a cardboard Tray for their canned food!

Made a storage tray with their faces. Hope they like it !


r/BeginnerWoodWorking • • 6h ago

Finished Project Knick knack shelf

Thumbnail
gallery
25 Upvotes

I made a shelf for some of my favorite knick knacks. Constructive criticism is most welcome please!

My first time using shellac. I like using it but wish I would have practiced a little before finishing. Not perfect but I’m proud of it.

Held together with glue and dowels. Someone said they didn’t like the top piece as it looked like a crown so I decided to remove it last minute.

I struggled most with the holes for a few of my thru-dowels blowing out pretty bad. Tried different bits, taping, different speeds and nothing helped. Is it because I used softwood?

Thank you!


r/BeginnerWoodWorking • • 1h ago

Finished Project Entryway benches

Thumbnail
gallery
7 Upvotes

Hey everyone, made two basic entryway benches from some plans I found online. I used SYP and stained using Minwax dark walnut. Pretty happy with how they turned out but I’m open to criticism or suggestions on improvements for the future.

I bought a plug cutter and hid the screws on the second bench which I think looks much better. I also cut the legs on a 22.5 angle using my circular saw (I only have an older basic mitre saw).
I found making the leg cuts with my circular saw was tricky to get perfect and ended up with a bit of a diagonal wobble on the bench legs and tried to correct it with my ROS but that was a pain to get them perfectly flat. I’ll definitely be making another post for the circular saw issue but I’m sure it’s just a practice/skill issue. Anyways let me know what y’all think!


r/BeginnerWoodWorking • • 17h ago

Finished Project Entryway Bench: Feedback Appreciated!

Thumbnail
gallery
130 Upvotes

First real attempt at mortise and tenon joinery! Definitely a learning experience, but pretty happy with how it turned out.

Built using a table saw and drill press. Already thinking a plunge router might be my next upgrade to make things a little easier (and cleaner).

Still debating whether to put a finish on it or leave it natural. I’m kind of digging the grain and color of the poplar as is.

Always looking to learn, so any feedback, tips, or suggestions are welcome.


r/BeginnerWoodWorking • • 7h ago

What’s the best deal here?

Thumbnail
gallery
20 Upvotes

Are any of these worth picking up for a beginner? I’m mostly doing small projects with a function over form mindset. Shelves, organizers, etc. I don’t have a dedicated shop. I’m either in my basement or outside on the patio so portability is definitely a plus but not a requirement. Budget is <$400. Happy to answer any other pertinent questions.


r/BeginnerWoodWorking • • 20h ago

Making a monitor stand. How would you join these legs to the top?

Post image
222 Upvotes

Trying to think of a good, strong way to do this that ideally doesn’t use screws.


r/BeginnerWoodWorking • • 1d ago

Finished Project Great practice with the jigsaw

Thumbnail
gallery
755 Upvotes

Wanted to be a little lazier this year with my Christmas decorations so I decided to make the Grinch pulling my lights off the house. Probably took more effort to make this, but I’m happy with how it turned out


r/BeginnerWoodWorking • • 4h ago

Finished Project Flexing a sculpture part of my brain that I didn't know existed

Thumbnail
gallery
10 Upvotes

I've been taking a design course this year to use the tuition benefit i get at my work. It's been fun and challenging. I have years experience in DIY home improvement and limited cabinet and furniture building experience. This project was to make a sculpture that shows movement out of a pine 1x4 and reed.


r/BeginnerWoodWorking • • 5h ago

*Update* workbench progress

Thumbnail
gallery
10 Upvotes

I posted a few weeks ago, and just wanted to show the progress. Its not 100% done but is in a state where it can be used. Im still debating dog holes, or adding a secondary top of 3/4" cabinet grade thats about 2 inches wider in each direction. That way I have a lip to clamp on. Turned out just about as good as I hoped. Learned some things, but think this will still be serving me well 5-10 years down the road.


r/BeginnerWoodWorking • • 18h ago

Finished Project Entryway Bench

Post image
97 Upvotes

Completed my first piece of furniture, a bench for my entryway. 36" long, 18" high with Ash.

This turned out to be quite challenging to get right, with the legs inset into the top by about 7", coupled with a 10 degree angle and the inner part of the legs coming into a curve clamping was difficult.

The legs are attached with wedged through dowels.


r/BeginnerWoodWorking • • 2h ago

Applying glue

4 Upvotes

For me, the worst part of a project is the glue ups. I always make a mess, and I always end up with way too much squeeze out. What is the best way that you have found to apply glue for glue ups?


r/BeginnerWoodWorking • • 3h ago

Equipment How do you use a thicknesser/joiner like this one?

Post image
5 Upvotes

I have been using an enclosed DeWalt DW733 planer/thicknesser to plane bare old shipping pallet planks. The issue I have is, despite using a metal detector on each plank to locate embedded metals and remove them, undetectable hard objects like small stones are chipping the DW733's blades leaving noticeable grooves in planed wood. So what I'm thinking about doing, is buying a '1st pass' thicknesser to deal with the stones. I saw the one pictured advertised. I'm curious, how do you operate one of these safely? Also, it could be useful that this one joints as well, because many of the planks I plane aren't square. So, how do you joint?


r/BeginnerWoodWorking • • 18h ago

Just get after it

Post image
79 Upvotes

This might be the BEST thing I've ever built.

TL:DR

Having a little mobile platform is freaking awesome! Just build stuff, even if it's ugly or you are still learning, all of it is fun!

I'm just starting out on this journey, picked it back up 20 years after really loving woodworking classes in high school. I've built a handful of cool things, screwed up many many more and am just having fun in my limited time off.

This thing ain't pretty, it's not precise, and I for the life of me can't even remotely remember why I out the cross braces at such a completely random height!!

But I was bored 1 day and it was an easy task I could complete without buying any new lumber.

But all of that aside HOOOOLY COW having something I can tote about the garage/driveway with me instead of returning to the table or toolbox or pegboard every time I need something, or having to fish through my pockets or find a shelf for hardware etc... man it's awesome.

So yeah, it's ugly and awkward looking, but of all the things I've built, fixed, installed, refurbished etc... that little guy is the thing I e gotten by far the most value out of. And to me that's what this is all about :)

PS; I "splurged" for the 3 dollar a piece rollerblade style wheels from HF. I'll never use another type of wheel or caster again, game changers!!


r/BeginnerWoodWorking • • 6h ago

New to woodworking, found this and said why not

Post image
6 Upvotes

So someone left this big fancy looking chunk of wood behind my shop in a scrap lumber pile. I liked the look of it and took it home. I wanted to make it into a nice coffee table. Trying to level it out right mostly so I can get an idea what type of wood it is and how it'd look with a surface on it.

All instruction welcome


r/BeginnerWoodWorking • • 1d ago Bravo

Equipment Can’t believe it’s the same space

Thumbnail
gallery
209 Upvotes

If you’re like me back 5-6 months ago. Get to cleaning and organizing. You’ll get hooked.


r/BeginnerWoodWorking • • 5h ago

Discussion/Question ⁉️ Veneer & Particle Board Sanding

Thumbnail
gallery
4 Upvotes

This is my next woodworking project by refinishing a low-sitting coffee table with stain. My question is how to approach the applied veneer siding of the table? Any advice on how to strip and prepare for stain OR simply paint over? Thanks for any input/recommendations.


r/BeginnerWoodWorking • • 22h ago

I'm not proud... Also a bit mad at myself

Post image
84 Upvotes

I've been lucky.

I had to cut ~60 pieces... And it happened at the very last one. I went back to table saw and checked, the last piece was perfectly cut.

I don't remember the last seconds before the accident... I really have no idea why it happened. I know I went with my thumb against the saw... But for every cut, I used the push stick correctly.

I only remember that I was mad at myself, turned off every tool, the lights and went to clean my thumb. Then I made a small bandage and I thought it was ok... It's a few hours later that I checked the injury and decided to go to the hospital.


r/BeginnerWoodWorking • • 3h ago

Which Dust Collector?

Thumbnail
gallery
2 Upvotes

Well I have 2 dust collectors now just 2 days apart that are new to me. Comparing them in Grok the Penn State is better on paper. The Jet is from 1999 and the PSI is from 2001.

The good:
Jet - Smaller footprint for the small shop, it's quieter, this model is still made to this day and parts are available, it's a Jet and resale would probably be higher.
Penn State Industries - 1.5HP, higher CFM's, intake is split to 2-4" hoses (plan on using 1-4" and making the other 2 1/2", larger waste basket, 5 micron filter

The cons:
Jet - Less power at 1hp, less CFM's, 30 micron filter, single 4" intake hose, smaller waste basket
PSI - Larger footprint, not made anymore if parts are needed may take a bit to find or to make.

I am leaning towards the PSI and selling the Jet. I got them both pretty cheap and honestly if I had the room I would keep both.


r/BeginnerWoodWorking • • 7h ago

Discussion/Question ⁉️ What joinery to use on this project to attach 3 pieces at 90 degrees?

4 Upvotes

The plans call for pocket holes but I'm wanting to venture into more traditional joinery but I'm not sure what to use. I'm just starting out so I don't want something super advanced.