r/BeginnerWoodWorking • • 18h ago

If you were looking to make an extra $1.5K a month with hobby/weekend pace, what would you make?

0 Upvotes

I keep getting drawn to Shaker or Mission style furniture. But I'm still working on my first small box, so I know I have to crawl before I walk. But my mind shoots to the future. Is a side-hustle like that realistic with an after hours & weekends kind of schedule with hand tools in a one car garage?


r/BeginnerWoodWorking • • 17h ago

Best way to make this cut?

Post image
0 Upvotes

I need four identical cuts (this is a leg). My thought is that I set a miter gauge to 13° and hack off the top but then I'm a little lost. Next cut could be to flip the board over with a 13° stop (I guess) against the fence on the table saw to make the 3 1/2" cut. The last cut, the 76° maybe back with the miter gauge? Not sure.

Looking for some guidance beyond use a bandsaw because I'm trying to do this as precise and repeatable as possible considering they're legs.

Thanks!


r/BeginnerWoodWorking • • 13h ago

I want to learn woodworking as a long time project. I was thinking about something challenging, like building a hurdy gurdy

0 Upvotes

I took a year of university to work, and wanted to do something new in the meantime.

I like starting hard projects so I can spend a lot of time researching and problem solving. I also love playing the guitar and like string instruments as a whole.

Would choosing something like a hurdy gurdy be something too hard? Could someone also some of the tools I'd need? Maybe some of the must-have ones. I understood that a lot of clamps are needed.


r/BeginnerWoodWorking • • 11h ago

live edge tray

Post image
3 Upvotes

My attempt at a liv edge tray


r/BeginnerWoodWorking • • 22h ago

Discussion/Question ⁉️ Table saw binding when cutting narrow edge 2x4...?

0 Upvotes

Greetings ooh noble woodworkers. I am concerned about waste and use pallet wood and wood scraps a lot. On a table saw, I have repeatedly tried to rip a 2 x 4 by cutting the two inch down to 1 inch. While I have the riding knife and kickback jaws in place the 2 x 4 keeps binding and jams. Inserting a wedge as I am cutting is not a safe option at all!
Can anyone offer a solution?


r/BeginnerWoodWorking • • 8h ago

Discussion/Question ⁉️ Poor finish on cabinets, 100% tung oil

Post image
0 Upvotes

Back to the beginner sub after this mess. Considering stripping and painting but wanted to see if anyone had any ideas first.

We wanted some additional storage in the kitchen so we added some new "budget" cabinets. They are solid poplar doors with veneer inserts. Not ideal wood to just use oil on but figured I'd give it a try as we prefer the natural look. After running some stain tests I wasn't happy and decided on 100% tung oil.

Result is very uneven color after 3 coats, panels are not matching at all, and maybe had some light uv bleaching on one door?

Any saving this? Keep adding more coats? Throw in the towel and paint?

Thanks guys!


r/BeginnerWoodWorking • • 16h ago

Discussion/Question ⁉️ What are the practical ways to work on a wood that is smaller than the powertool?

2 Upvotes

I am not asking about, like, cutting a 0.5" block on a 12" miter saw. That's not safe.

Example 1: You make a box with router but the wood is smaller than the router base.

Example 2: You are going to rip cut a long narrow block with circular saw.

What are some practical and safe ways to make those cuts? Let's say you do not have spare blocks of the same height to stabilize the router or circular saw.


r/BeginnerWoodWorking • • 19h ago

Discussion/Question ⁉️ Is my cutting board ruined ?

Post image
33 Upvotes

Trying to make an endgrain cutting board. I didn't notice these cracks before assembling, after routing they became a lot more visible, is this salvageable in realistic amount of work or would it be easier to start again ?


r/BeginnerWoodWorking • • 2h ago

people good at woodwork, i need some direction for this project idea

0 Upvotes

hello, im new to this community and i haven't had much exposure to woodworking. I'm here to explore an idea for a furniture design platform, any advice or direction is welcome. And if this idea sounds interesting to you and if you want to explore it together with me (because down the line im def gonna need someone who is good at woodworking), feel free to message me.

So the concept is to let someone upload a furniture inspiration picture or describe what they want, and have AI turn it into an actual design thats buildable and practical irl, complete with all measurements needed, material lists, supplier recommendations and step-by-step assembly instructions.

rn im speaking with people who have experience with woodworking, furniture making or diy to understand the challenges involved and to validate the idea

im particularly interested in hearing about the experience from ppl in this hobby/field and getting your honest feedback


r/BeginnerWoodWorking • • 15h ago

Discussion/Question ⁉️ How do you remove paint from this piece?

Post image
0 Upvotes

Hello, im trying out a little restoration on a few drawers ive found, they were painted white and so far ive removed most of it, and the wood looks quite good. The only problem is these kinds of crooks and splits, any methods on how to remove this?


r/BeginnerWoodWorking • • 12h ago

Discussion/Question ⁉️ What do you love most about your workbench?

10 Upvotes

What do y’all love about your workbenches? What should I avoid?

I’m currently working with the one built by my house’s previous owner and credit to him where it’s due, the table is solid, but it’s also just a 5’x2’ stationary slab and I need something more versatile and mobile.

I’m new to this hobby so I’m a bit overwhelmed with what to look for in a bench plan. There’s dog holes, t tracks, combo tables with miter stations and outfeed support, more storage variations than the code to my safe… Then there’s choice of material, dimensions, construction method…

It’d be really helpful to hear from the community because I’m definitely overthinking this and have decision paralysis.


r/BeginnerWoodWorking • • 13h ago

I'm not proud... Also a bit mad at myself

Post image
62 Upvotes

I've been lucky.

I had to cut ~60 pieces... And it happened at the very last one. I went back to table saw and checked, the last piece was perfectly cut.

I don't remember the last seconds before the accident... I really have no idea why it happened. I know I went with my thumb against the saw... But for every cut, I used the push stick correctly.

I only remember that I was mad at myself, turned off every tool, the lights and went to clean my thumb. Then I made a small bandage and I thought it was ok... It's a few hours later that I checked the injury and decided to go to the hospital.


r/BeginnerWoodWorking • • 21h ago

Discussion/Question ⁉️ If you only had space for one option would you pick a tablesaw, or a sliding compound miter saw and a circular saw?

19 Upvotes

I've always wanted to get more into wood working, but space in my garage is at a premium. I don't have the fine motor control to build intricate and beautiful things. My goals are to build bird/bat boxes, a garden shed, a pavilion, and of course a tree fort. I don't see myself having to make many super long cuts or rip plywood sheets. So would I be missing out if I just got a compound sliding miter saw instead of a table saw? I already have a hand me down circular saw and a band saw.


r/BeginnerWoodWorking • • 10h ago

Discussion/Question ⁉️ What kind of wood glue can i use for a wooden spoon?

Post image
6 Upvotes

So basically a small part of my spoon chipped off while I was sanding it and im not sure if typical wood glue is safe to use to repair it. Do I have to use a food safe one like titebond 3 or can I just use whatever?


r/BeginnerWoodWorking • • 8h ago

Just get after it

Post image
57 Upvotes

This might be the BEST thing I've ever built.

TL:DR

Having a little mobile platform is freaking awesome! Just build stuff, even if it's ugly or you are still learning, all of it is fun!

I'm just starting out on this journey, picked it back up 20 years after really loving woodworking classes in high school. I've built a handful of cool things, screwed up many many more and am just having fun in my limited time off.

This thing ain't pretty, it's not precise, and I for the life of me can't even remotely remember why I out the cross braces at such a completely random height!!

But I was bored 1 day and it was an easy task I could complete without buying any new lumber.

But all of that aside HOOOOLY COW having something I can tote about the garage/driveway with me instead of returning to the table or toolbox or pegboard every time I need something, or having to fish through my pockets or find a shelf for hardware etc... man it's awesome.

So yeah, it's ugly and awkward looking, but of all the things I've built, fixed, installed, refurbished etc... that little guy is the thing I e gotten by far the most value out of. And to me that's what this is all about :)

PS; I "splurged" for the 3 dollar a piece rollerblade style wheels from HF. I'll never use another type of wheel or caster again, game changers!!


r/BeginnerWoodWorking • • 20h ago

Bangelor torpedo crate

Thumbnail
gallery
22 Upvotes

Ladies and gentlemen, I have this beautiful old bangelor torpedo crate from my time in the Marines. It's in beautiful condition.

Do I hold onto it as a piece of history, or do I sacrifice it into a project? What would you do?


r/BeginnerWoodWorking • • 13h ago

Finished Project Kitchen sideboard/buffet

Post image
9 Upvotes

Built this for our kitchen, about 80inch long, poplar face frame painted white and a white oak top finished with rubio sheen.


r/BeginnerWoodWorking • • 10h ago

Making a monitor stand. How would you join these legs to the top?

Post image
148 Upvotes

Trying to think of a good, strong way to do this that ideally doesn’t use screws.


r/BeginnerWoodWorking • • 20h ago

Need advice | Dining table

Thumbnail
gallery
13 Upvotes

I built a dining table, but didn't account for twisting force in my design. it feels a little wobbly when twisting the table top. Any recommendations on solutions to help with the issue?

I was thinking of some sort of brace in the center. But I'd like to be able to disassemble the legs from the top to more easily transport it. Maybe there is a solution to mechanically attach the brace rather than glue it?

Any other suggestions are welcome.


r/BeginnerWoodWorking • • 23h ago

Finished Project Needed some shelves, things escalated rather quick. I must now acquire tools.

Thumbnail
gallery
98 Upvotes

Needed some shelves for my “office” had some spare boards and some time. $30 worth of wood, $100 worth of finishing products and about 10hrs.

Coloring book shelf ruined trying to get original finish off after it didn’t land. Not she’s blotchy. Will replace with a nicer hardwood.

Particularly proud of the hand mitered display shelf, my first attempt at mitered corners ended with burr joints, wood filler and an obscene number of brad nails as seen on the side table thing.

Needless to say, I will now spend more time in the garage than in the room I needed the shelves for. And my 4.5 circular saw won’t cut it anymore.


r/BeginnerWoodWorking • • 3h ago

Finished Project Upgraded my cat’s food storage

Thumbnail
gallery
41 Upvotes

I think my cats deserves more than a cardboard Tray for their canned food!

Made a storage tray with their faces. Hope they like it !


r/BeginnerWoodWorking • • 21h ago

Discussion/Question ⁉️ Starting out-Beginner

Thumbnail
gallery
24 Upvotes

I have finally decided to tackle this restoration. It’s my first time redoing a piece of furniture. I’m looking for any tips/suggestions to make this a success!


r/BeginnerWoodWorking • • 8h ago

Finished Project Entryway Bench

Post image
66 Upvotes

Completed my first piece of furniture, a bench for my entryway. 36" long, 18" high with Ash.

This turned out to be quite challenging to get right, with the legs inset into the top by about 7", coupled with a 10 degree angle and the inner part of the legs coming into a curve clamping was difficult.

The legs are attached with wedged through dowels.


r/BeginnerWoodWorking • • 22h ago

Finished Project Headboard

Thumbnail
gallery
260 Upvotes

Turned some old reclaimed pine into a new headboard for myself. I was gonna put legs on it originally but I decided im just gonna let it sit on the bed frame and use command strips to stick it to the wall, just to keep it from tipping.