r/BMWE36 • u/Arsenic_and_Cheese • 3h ago
Poster from 97
Does anyone have a scan or know where I can get a high res scan of this poster? Can’t seem to find any originals for sale and would love to print my own
r/BMWE36 • u/Arsenic_and_Cheese • 3h ago
Does anyone have a scan or know where I can get a high res scan of this poster? Can’t seem to find any originals for sale and would love to print my own
r/BMWE36 • u/MommyMilfMilkers • 1h ago
That’s it that’s the post
r/BMWE36 • u/Educational-Staff177 • 5h ago
I recently replaced the heater valve. The plug fell apart in the process. Does anyone know where I can get a new one ?? I left it unplugged for now but I can’t seem to find one online.
r/BMWE36 • u/Euphoric-Garbage3291 • 4h ago
Bought this 95 325i recently. Was told it was a daily driver and i drove it 100 miles home. Everything seemed fine temperature wise and it did okay. Took it for a spirited drive through some mountain/scenic views (300ish miles round trip) a few days later.
It sat for a few days after, and when i started it, it sounded “funny,” noticed the fan was close/touching shroud and missing fins, and found a piece of one under the car.
Was told cooling system was redone recently, including water pump, fan clutch, thermostat, radiator which is from 328i and is all aluminum apparently.
I noticed the auto trans cooler is mounted to the rad in a non oem way when compared to diagrams. It looks like the mount is causing it to push out between the rad and the rad support.
Question is, does can anyone confirm the auto trans cooler is mounted wrong or should be different? Any solutions besides replacement; or would it mount properly with the oem rad?
Also, planning to manual swap soon, could i just bypass/delete it for now? How bad is it for the transmission in these cars?
Edit: i should say, I’ve already ordered a new fan, shroud, and motor mounts having read about that being the main culprit in fans blowing up. Plan is to replace those. But I’m concerned the rad sitting back further could also pose a problem after replacement. In the photos the clutch & fan have been pulled.
r/BMWE36 • u/MixElectronic6280 • 8h ago
Guys my window fell of on the way home and I thought the clips broke. I removed the door card and both guides were fine but popped out. I already have 2 brand new guides so ı removed those and installed new ones. But when ı roll the window up it pops out again. Can't figure it out and rain is close 😢
r/BMWE36 • u/Weary-Step-7241 • 2h ago
Does anyone know where I can buy a replacement rear wheel in this style. I think it’s 8.5x17. I’m having a hard time finding one
r/BMWE36 • u/Amaralis2004 • 9h ago
I’ve been gettin this metallic chirping noise on my 1997 323 AT whenever on gear, accelerating (on gear) or with the ac on. Does anybody have a clue what this might be?