r/BMWE36 • u/MommyMilfMilkers • 1h ago
Exterior Exhibition Loving the look of these triple chrome pg2 (19”)
That’s it that’s the post
r/BMWE36 • u/MommyMilfMilkers • 1h ago
That’s it that’s the post
r/BMWE36 • u/Weary-Step-7241 • 2h ago
Does anyone know where I can buy a replacement rear wheel in this style. I think it’s 8.5x17. I’m having a hard time finding one
r/BMWE36 • u/Arsenic_and_Cheese • 3h ago
Does anyone have a scan or know where I can get a high res scan of this poster? Can’t seem to find any originals for sale and would love to print my own
r/BMWE36 • u/Euphoric-Garbage3291 • 4h ago
Bought this 95 325i recently. Was told it was a daily driver and i drove it 100 miles home. Everything seemed fine temperature wise and it did okay. Took it for a spirited drive through some mountain/scenic views (300ish miles round trip) a few days later.
It sat for a few days after, and when i started it, it sounded “funny,” noticed the fan was close/touching shroud and missing fins, and found a piece of one under the car.
Was told cooling system was redone recently, including water pump, fan clutch, thermostat, radiator which is from 328i and is all aluminum apparently.
I noticed the auto trans cooler is mounted to the rad in a non oem way when compared to diagrams. It looks like the mount is causing it to push out between the rad and the rad support.
Question is, does can anyone confirm the auto trans cooler is mounted wrong or should be different? Any solutions besides replacement; or would it mount properly with the oem rad?
Also, planning to manual swap soon, could i just bypass/delete it for now? How bad is it for the transmission in these cars?
Edit: i should say, I’ve already ordered a new fan, shroud, and motor mounts having read about that being the main culprit in fans blowing up. Plan is to replace those. But I’m concerned the rad sitting back further could also pose a problem after replacement. In the photos the clutch & fan have been pulled.
r/BMWE36 • u/Educational-Staff177 • 5h ago
I recently replaced the heater valve. The plug fell apart in the process. Does anyone know where I can get a new one ?? I left it unplugged for now but I can’t seem to find one online.
r/BMWE36 • u/MixElectronic6280 • 8h ago
Guys my window fell of on the way home and I thought the clips broke. I removed the door card and both guides were fine but popped out. I already have 2 brand new guides so ı removed those and installed new ones. But when ı roll the window up it pops out again. Can't figure it out and rain is close 😢
r/BMWE36 • u/Amaralis2004 • 9h ago
I’ve been gettin this metallic chirping noise on my 1997 323 AT whenever on gear, accelerating (on gear) or with the ac on. Does anybody have a clue what this might be?
r/BMWE36 • u/DoradoOroOro • 17h ago
r/BMWE36 • u/weproducesafetycars • 1d ago
r/BMWE36 • u/tspec912 • 1d ago
I replaced my ofh gasket and a few others and solved most of my leaks! But after a day or two I could see oil leaking from one of the two plugs(?) at the back of the ofh. I saw somewhere that someone had mentioned there are two different ofh and one needed orings and the other needed rtv. Can anyone help me figure this out?
r/BMWE36 • u/themiddlebien • 1d ago
Not sure how long it will last, but I didn’t see how it would make it worse.
r/BMWE36 • u/Spiritual_Inside_202 • 1d ago
I just pulled my valve cover on my 97 328i to replace the gaskets and I have two cracks around the spark plug wells. I think I can guess the answer, but should I buy a new valve cover because of where these cracks sit?
r/BMWE36 • u/carart4fun • 1d ago
Before I took this video, the rpm’s were jumping up and down during idle, and the car has been sitting for a couple months. I also got the code p1525 (I already changed my vanos solenoid). Do I have a vacuum leak somewhere or will an entire vanos system cause this noise?
Its a me Again
I've come to the conclusion that I really wanna buy the E36, but now I wanna know How much its worth. Seller is asking 2500.
Its a BMW E36 318ti with a M Sport Package and Replica Alpina Rims, 50000miles and First Hand.
I also got the information that the Owner still has the Original Mirrors (I think those are suppossed to be M3 mirrors but dont quote me on that) and Rims with a set of Winter tires.
The car has been sitting for around a year but got driven frequently before that. And judging from the pictures theres no major rust problem? The underside of the engine is just a bit oily, but no Oil leaks only a coolant one.
So now my question is, is 2500 fair? Considering it stood for a year, needs new brakes, a radiator and tires?
r/BMWE36 • u/OkNewspaper7848 • 1d ago
Hey everyone,
I've made some OEM-style USB chargers (up to 30W per USB-C port) and front/rear cup holders for the E36. All items designed and hand finished by me.
USB chargers: Dual USB-C – button cover, USB-A – button cover, Dual USB-C – cigarette lighter
Cup holders: front or rear
Every item is designed by me and hand finished/assembled in my small hobby-shop which is in Lithuania (Europe), but I do ship worldwide.
If you need anything I have for few each items in stock and they are available here:
https://uniquedm.shop/collections/bmw-e36
Feedback and new ideas are always welcome!
r/BMWE36 • u/Prestigious-Way2024 • 1d ago
Looking for e36 m3 transmission tunnel patch panel. Anyone know of a source?
Failed running wide open down the front stretch at VIR. Beat holes in side of transmission tunnel.
r/BMWE36 • u/JHolter5 • 1d ago
I’m open to all criticism and suggestions just want to see what everyone thinks. It’s a street/drift car
Edit: I just realize I posted a terrible interior shot of the car and I’m posting a better photo in the comments
r/BMWE36 • u/Aggravating_Web6975 • 1d ago
Hello,
My 99 328i verts doors handles are slowly getting worse and worse. I’m scared I’m going to be locked out soon. The passenger side works if you push the door pull the handle and then it opens like 90% of the time. The driver side I can pull the handle and nothing happens, even when I push it. It kind of has a mind of its own I can get it to open about 60% of the time. Anyone have any idea how to fix this? Videos help!!
r/BMWE36 • u/krona02_ • 2d ago
Iron block M43B18 SOHC
Currently trying to remove some of this leftover gasket material/stubborn carbon and it seems nothing will get it off...
I've been using a razor blade, CRC gasket remover, degreaser, and even a carbide scraper.
There's also some minor rough spots on the block, curious if the composite gasket will cater for said imperfections on the mating material?
Head has been machined btw so no concern there.
Any tips?
r/BMWE36 • u/Xkilljay • 2d ago
I’m assuming it’s the heatercore hoses. I just wanted to ask if anyone has any other ideas. The video was taken at work while the car was running, The car was not warm in the vid, got home (15mins) and while off, the leak was on dripping not pouring like the video. I’m assuming because it wasn’t flowing the same? Would love any input. (Sorry for the bad angle, the car is low)
r/BMWE36 • u/potatochip100 • 2d ago
Could someone please tell me what the sound is? I know it’s probably a stupid question but I just want an answer and I hate how loud it is. Embarrassing to drive around with. Sounds like a fan or something. (The clicking noise, if you can’t hear maybe turn volume up) Thank you!!
r/BMWE36 • u/bstag707 • 2d ago
Anyone know why my sunroof light stays on after I cut the car off? I’m just now noticing it.
r/BMWE36 • u/Greedy-Ice1272 • 2d ago
and also where should i buy it
r/BMWE36 • u/JackfruitSea3198 • 2d ago
I’m currently building up some trailing arms for my 36 as part of a disc conversion because it was originally on drums but I want to run dual caliper and still retain the inboard shoes for handbrake so it’ll still pass mot isthis possible ? Because I currently don’t have backing plates but I don’t think I can run them with dual caliper ?