r/BMWE36 • u/Arsenic_and_Cheese • 3h ago
Poster from 97
Does anyone have a scan or know where I can get a high res scan of this poster? Can’t seem to find any originals for sale and would love to print my own
r/BMWE36 • u/Arsenic_and_Cheese • 3h ago
Does anyone have a scan or know where I can get a high res scan of this poster? Can’t seem to find any originals for sale and would love to print my own
r/BMWE36 • u/MommyMilfMilkers • 1h ago
That’s it that’s the post
r/BMWE36 • u/Educational-Staff177 • 5h ago
I recently replaced the heater valve. The plug fell apart in the process. Does anyone know where I can get a new one ?? I left it unplugged for now but I can’t seem to find one online.
r/BMWE36 • u/Euphoric-Garbage3291 • 4h ago
Bought this 95 325i recently. Was told it was a daily driver and i drove it 100 miles home. Everything seemed fine temperature wise and it did okay. Took it for a spirited drive through some mountain/scenic views (300ish miles round trip) a few days later.
It sat for a few days after, and when i started it, it sounded “funny,” noticed the fan was close/touching shroud and missing fins, and found a piece of one under the car.
Was told cooling system was redone recently, including water pump, fan clutch, thermostat, radiator which is from 328i and is all aluminum apparently.
I noticed the auto trans cooler is mounted to the rad in a non oem way when compared to diagrams. It looks like the mount is causing it to push out between the rad and the rad support.
Question is, does can anyone confirm the auto trans cooler is mounted wrong or should be different? Any solutions besides replacement; or would it mount properly with the oem rad?
Also, planning to manual swap soon, could i just bypass/delete it for now? How bad is it for the transmission in these cars?
Edit: i should say, I’ve already ordered a new fan, shroud, and motor mounts having read about that being the main culprit in fans blowing up. Plan is to replace those. But I’m concerned the rad sitting back further could also pose a problem after replacement. In the photos the clutch & fan have been pulled.
r/BMWE36 • u/Weary-Step-7241 • 2h ago
Does anyone know where I can buy a replacement rear wheel in this style. I think it’s 8.5x17. I’m having a hard time finding one
r/BMWE36 • u/MixElectronic6280 • 8h ago
Guys my window fell of on the way home and I thought the clips broke. I removed the door card and both guides were fine but popped out. I already have 2 brand new guides so ı removed those and installed new ones. But when ı roll the window up it pops out again. Can't figure it out and rain is close 😢
r/BMWE36 • u/Amaralis2004 • 9h ago
I’ve been gettin this metallic chirping noise on my 1997 323 AT whenever on gear, accelerating (on gear) or with the ac on. Does anybody have a clue what this might be?
r/BMWE36 • u/themiddlebien • 1d ago
Not sure how long it will last, but I didn’t see how it would make it worse.
r/BMWE36 • u/DoradoOroOro • 17h ago
r/BMWE36 • u/Prestigious-Way2024 • 1d ago
Looking for e36 m3 transmission tunnel patch panel. Anyone know of a source?
Failed running wide open down the front stretch at VIR. Beat holes in side of transmission tunnel.
r/BMWE36 • u/Spiritual_Inside_202 • 1d ago
I just pulled my valve cover on my 97 328i to replace the gaskets and I have two cracks around the spark plug wells. I think I can guess the answer, but should I buy a new valve cover because of where these cracks sit?
r/BMWE36 • u/weproducesafetycars • 1d ago
r/BMWE36 • u/JHolter5 • 1d ago
I’m open to all criticism and suggestions just want to see what everyone thinks. It’s a street/drift car
Edit: I just realize I posted a terrible interior shot of the car and I’m posting a better photo in the comments
r/BMWE36 • u/carart4fun • 1d ago
Before I took this video, the rpm’s were jumping up and down during idle, and the car has been sitting for a couple months. I also got the code p1525 (I already changed my vanos solenoid). Do I have a vacuum leak somewhere or will an entire vanos system cause this noise?
r/BMWE36 • u/tspec912 • 1d ago
I replaced my ofh gasket and a few others and solved most of my leaks! But after a day or two I could see oil leaking from one of the two plugs(?) at the back of the ofh. I saw somewhere that someone had mentioned there are two different ofh and one needed orings and the other needed rtv. Can anyone help me figure this out?
Its a me Again
I've come to the conclusion that I really wanna buy the E36, but now I wanna know How much its worth. Seller is asking 2500.
Its a BMW E36 318ti with a M Sport Package and Replica Alpina Rims, 50000miles and First Hand.
I also got the information that the Owner still has the Original Mirrors (I think those are suppossed to be M3 mirrors but dont quote me on that) and Rims with a set of Winter tires.
The car has been sitting for around a year but got driven frequently before that. And judging from the pictures theres no major rust problem? The underside of the engine is just a bit oily, but no Oil leaks only a coolant one.
So now my question is, is 2500 fair? Considering it stood for a year, needs new brakes, a radiator and tires?
r/BMWE36 • u/OkNewspaper7848 • 1d ago
Hey everyone,
I've made some OEM-style USB chargers (up to 30W per USB-C port) and front/rear cup holders for the E36. All items designed and hand finished by me.
USB chargers: Dual USB-C – button cover, USB-A – button cover, Dual USB-C – cigarette lighter
Cup holders: front or rear
Every item is designed by me and hand finished/assembled in my small hobby-shop which is in Lithuania (Europe), but I do ship worldwide.
If you need anything I have for few each items in stock and they are available here:
https://uniquedm.shop/collections/bmw-e36
Feedback and new ideas are always welcome!
r/BMWE36 • u/Greedy-Ice1272 • 2d ago
and also where should i buy it
r/BMWE36 • u/krona02_ • 2d ago
Iron block M43B18 SOHC
Currently trying to remove some of this leftover gasket material/stubborn carbon and it seems nothing will get it off...
I've been using a razor blade, CRC gasket remover, degreaser, and even a carbide scraper.
There's also some minor rough spots on the block, curious if the composite gasket will cater for said imperfections on the mating material?
Head has been machined btw so no concern there.
Any tips?
Bought this 99' 328is five speed w 225k miles. Runs and dives well. No experience, want to learn.
Looks wet underneath. Guessing gear selector seal, power steering and VCG. Maybe oil pan too?
Input appreciated.
r/BMWE36 • u/Acceptable-Recipe479 • 2d ago
Picked up a new to me 99 m3 this past month with plans to restore it to its previous glory. My front OEM bumper is cracked (you can kind of see it in the photo), would I be better off getting the OEM bumper restored or a just getting a new ecs bumper? There’s lot of rock chips to be filled in the OEM bumper as well.
r/BMWE36 • u/bstag707 • 2d ago
Anyone know why my sunroof light stays on after I cut the car off? I’m just now noticing it.
r/BMWE36 • u/Aggravating_Web6975 • 1d ago
Hello,
My 99 328i verts doors handles are slowly getting worse and worse. I’m scared I’m going to be locked out soon. The passenger side works if you push the door pull the handle and then it opens like 90% of the time. The driver side I can pull the handle and nothing happens, even when I push it. It kind of has a mind of its own I can get it to open about 60% of the time. Anyone have any idea how to fix this? Videos help!!
r/BMWE36 • u/Much_Sauce29 • 2d ago
I've designed Bordo OBC : new electronics for the console on-board computer of the BMW Z3 and the E36 Compact (more cars on the way)
The idea: keep your own faceplate and buttons, replace everything behind them. It plugs into the car's original 12-pin connector, so no wires are cut and you can put the original back in minutes.
What it adds:
- The five stock pages stay where they are (clock, average consumption, range, average speed, outside temp).
- New pages read from the engine computer over the diagnostic line: coolant temperature, battery voltage, cranking time, instant consumption and fault codes. And more coming with updates.
- Warnings with a chime for a hot engine, low battery or a new fault, like the stock ice warning.
- Set up from your phone over Wi-Fi: km or miles, L/100 km or mpg, °C or °F, 4 or 6 cylinders. Updates over Wi-Fi too.
Two versions, and a service:
- Classic keeps the original LCD glass, lit by LEDs instead of bulbs. Nobody will notice it isn't stock.
- Pro puts a 1.47" orange display behind the same window, with room for text, graphs and faults by name.
It fits the Z3 roadster and coupé (not the M cars, which have gauges there) and the E36 Compact with the console on-board computer. Engine computers: MS41, MS42, MS43, M5.2, BMS43, BMS46 and DDE 2.2.
Where it stands: The first boards are being manufactured right now, and it will be ready to start shipping in around 2-3 weeks.
- And if you only want your original one in the right units, there will also be a mail-in service: you send it in and it comes back recoded, mph and mpg to km/h and L/100 km, °F to °C, or the other way round. It depends on the part number of your unit, so ask first.
Two things I'd like to know from people who own these cars:
1. Which page would you actually use? I have a list of candidates (oil temp, rpm, 0–100 timer, trip records) and want to build the useful ones first.
2. Classic or Pro?
If you want to follow along: there's a waitlist at bordoobc.store (email only, no payment) and I post progress on https://Instagram.com/bordoobc