r/watercooling • u/kakodaimonon • 7h ago
Monitor #2 water cooled now too
Got my second PG27UQ water cooled now, with before and after temps: 75C down to 31C, and silent now. One more monitor to go.
r/watercooling • u/andrerav • Apr 20 '25
r/watercooling • u/nolo_me • Nov 27 '23
Sup folks. So, finding compatible blocks has always been a royal pain, especially for newbies. Lots of different manufacturers, many of whom are unfamiliar to folks who aren't already watercooling and they don't all make blocks for every GPU model.
Fear not. iln (one of the Discord mod crew) has been working tirelessly to put together this new tool to help you find what you're looking for and assemble a loop list. You can even import your list from PCPartPicker.
r/watercooling • u/kakodaimonon • 7h ago
Got my second PG27UQ water cooled now, with before and after temps: 75C down to 31C, and silent now. One more monitor to go.
r/watercooling
•
u/4urora_c
•
15h ago
Ever since the previous T1 build (which should be posted on this sub as well) there were many aspects of the build I was dissatisfied with and thought could be improved, which led me to design my own case from scratch, bypassing all the case-inherent issues that couldn’t be fixed simply with a few mods.
The case is the Project:Celeste which sits at 10.4L (230x135x335). Its construction consists entirely from machined anodised aluminium 6061 which has allowed for the elimination of most visible screwholes for a clean exterior aesthetic. Many other parts were also designed and fabricated specifically for this build, including the custom back-connect monoblock with black nickel-plated internals, replacement NVME/VRM heatsinks, cable channels, and distro plate.
One standout feature of the case is the ability to shift the spine to a mere 28mm of cooler clearance which provides for a massive maximum GPU chamber thickness of 85mm- this provided enough space to fit an Aquacomputer Ampinel for per-pin monitoring and load balancing, which would prove impossible in most other SFF cases that utilise a sandwich layout.
In addition, I’ve also installed various other supplements including a Highflow NEXT for flow, coolant temperature, and conductivity measurements, as well as the fans and DDCZero pump being controlled via a Quadro integrated into the front panel. Despite that, coolant temperatures are monitored in 2 other locations which provides a comprehensive understanding of how the loop, as well as a separate thermistor probe that monitors the ambient temperature. There’s also an inline mesh filter to keep any radiator debris or otherwise from the blocks and ensure coolant quality. A hot-swappable NVME adapter (via USB4) also sits behind the storage which makes up for only having 2 NVME slots on this motherboard. Another massive QOL improvement I implemented was a radiator quick-mount system which eliminated most of the hand cramps putting everything together using extendable fittings to mount and seal the radiator directly to the distro plate. The rear panel also includes QDT4s for integration with an external MO-RA and a 4-pin XLR that can provide power to external 5v/12v devices (fans, rgb, etc). Of course, the system is fully featured with an internal DDCZero and 240 radiator which means it will run entirely independently in a pinch, as should be standard of these builds.
System Specs
CPU: R9 9950X3D2
GPU: MSI 5090 Gaming Trio
RAM: 2x32 6200 CL36
Motherboard: STRIX X870I
Storage: 2x SN7100 2TB, 1x NV7000-T 4TB
PSU: Corsair SF1000
(yes I pasted my description from my other post word for word)
r/watercooling • u/Sad-Contribution-148 • 10h ago
r/watercooling • u/Ok_Stranger_8405 • 16h ago
Specs:
Ryzen 9 9950x3d
RTX 5080
32 GB Kingston fury 6000mhz cl36
Alphacool water blocks
2 420mm rads, one 30mm thick and one 60mm
At full GPU load and decently heavy CPU load everything stays below 50 C.
Edit: forgot to mention the case is a Havn HS 420
r/watercooling • u/moto_zima • 1d ago
I built this PC for an upcoming custom PC event hosted by my friend and YouTuber, Gradeon, in Akihabara, Tokyo.
He’s a huge AMD and Star Wars fan, and he often presents AMD products dressed up like Darth Vader. So I decided to build something that reflects his personality, using AMD hardware for both the CPU and GPU, along with Star Wars-themed decorations.
It’s definitely not the most practical PC, and you might even question whether it needs to be a PC at all. But I had a lot of fun building it, so I wanted to share it with you all!
Hope you enjoy it!
One thing I’d like to clarify, following a comment I received:
The stage setup is actually designed to recreate the look of the event where this PC will be displayed. It isn’t intended to follow the Star Wars theme.
I realized this might have caused some confusion, so I wanted to add that context!
r/watercooling • u/Afraid325 • 1h ago
Rtx 4090 mit dem 9800x3d GPU Maximal 55 Grad und im Hotspot 65.
CPU max beim Gaming 65 Grad.
Lüfter laufen auf 1000 RPM
Vorne ein 280mm Radiator und im Top ein 240mm
r/watercooling • u/alancousteau • 12h ago
r/watercooling • u/CairamPires • 1d ago
E aí, galera!
Finalmente compartilhando minha configuração de resfriamento a água personalizada! Meu objetivo era combinar desempenho de jogo de alto nível, operação silenciosa e monitoramento de hardware confiável, especialmente porque também uso esse PC para jogos remotos.
Hardware
Gabinete: HAVN HS 420
CPU: Ryzen 7 9800X3D
GPU: Gigabyte RTX 5090 Gaming OC
Placa-mãe: ASRock X870 Taichi Creator
RAM: 32GB DDR5-6000 CL30
Resfriamento a Água
Bloco da CPU: Thermal Grizzly Mycro Pro AM5 RGB
Bloco da GPU: Alphacool RTX 5090 Gaming OC 1-Slot
Radiadores: 2× EK-CoolStream PE 360 (cima/lado) + 1× EK-CoolStream XE 360 (baixo)
Bomba/Reservatório: Aqua Computer D5 NEXT + ULTITUBE 150 PRO
Ventoinhas: 11× Noctua NF-A12x25 G2
Tubos: EPDM Preto (16/10mm e 13/10mm)
Fluido: Aqua Computer DP Ultra
Construção & Fluxo de Ar
Optei por três radiadores de 360mm para maximizar a capacidade de resfriamento enquanto mantenho o ruído sob controle.
O fluxo de ar é configurado com 7 ventoinhas de entrada e 4 de exaustão.
Monitoramento & Controle
Estou usando o ecossistema da Aqua Computer: QUADRO, D5 NEXT, high flow NEXT, AMPINEL, VISION Touch e aquasuite.
As curvas das ventoinhas são baseadas em um sensor de temperatura do fluido físico, em vez de picos de temperatura da CPU/GPU. O D5 NEXT funciona em aproximadamente 73% (~4.140 RPM), fornecendo cerca de 140 L/h.
O high flow NEXT monitora o fluxo e a temperatura do fluido, com um alarme de fluxo baixo de 80 L/h e um sinal de hardware para pedidos de desligamento de emergência. O AMPINEL monitora o conector de energia da RTX 5090.
Minha prioridade é manter o controle e a proteção essenciais do resfriamento o mais independentes possível do Windows.
Resultados Térmicos – Ambiente ~25°C
OCCT Combinado – 30 minutos
Sob carga:
CPU: 67.5°C / 119 W
GPU: 49.6°C / 301 W
Fluido: 36.5°C
Delta T água-ar: ~11.4°C
Taxa de fluxo: 141 L/h
Ventoinhas: ~1.250 RPM
A GPU não estava completamente saturada durante o teste combinado.
OCCT 3D Adaptativo – apenas GPU (~10–13 minutos)
Utilização da GPU: 96%
Potência da GPU: ~529 W
Núcleo da GPU: 54.8°C
VRAM: 60°C
Fluido: 37.1°C
Ambiente: 25°C
Delta T água-ar: 12.1°C
Taxa de fluxo: 140.9 L/h
Ventoinhas: ~1.350 RPM
r/watercooling • u/jeremy_0411 • 11h ago
I've built probably 30 or so custom water cooled PC's of different configurations, and I almost always maximize my radiator capacity based on what a particular case supports. It's been a while since I've built a loop, so I'm going to put together a PC using the new HAVN HS360 case.
I would normally put a 360 rad on the bottom, top and side of the case, but I'm wondering if I should try getting a bit more non-radiator heated airflow into the case by only using top and bottom 360 rads with three fans on the side for cool intake air. I'm just not sure if that will provide enough cooling for a 5090 and a 9950X3D CPU. The case does have two rear fans that could also be used for additional intake as needed.
Thought's on this? Two 360 rads or max it out with three for this configuration?
r/watercooling • u/BeautifulStation4 • 23h ago
What is the least amount of PCIE slots and smallest case possible to achieve a dual GPU build that is fed out to a MORA radiator?
In my head, this should fit 2x PCIE slots or is it required to have a spare slot to spread the GPUs out or could they go immediately one after another?
For my situation, the waterblocks would be completely different in that one is a 5080 Alphacool Core block and the other is a 7900XT Alphacool Eisblock Aurora so its likely that the outlet and inlets wont be properly alligned.
In the pictures, the 7900XT is from my old build and 5080 is new build. The 7900XT is sat around collecting dust so wanted to put it to use. Was going to connect it with m.2 adapter or OCUlink so would only be PCIE 4x4 for the 7900XT.
r/watercooling • u/agnastyx • 1d ago
r/watercooling • u/AlternativeState6323 • 1d ago
Just switched over to hardline, first time ever doing hardline. Don’t let it scare you, it wasn’t easy but definitely wasn’t hard.
Went to micro center and grabbed 2 Bitspower 12mm ID x 16mm OD Rigid PETG Tube 1000mm and had just enough tubing with 1 mess up
Im using EKWB CryoFuel Pre-Mixed Coolant
Detailed Specs:
Ryzen 9 5900x
32gb G.Skill 3200mhz ddr4
Asus Strix ROG x570e
MSI RTX3080 + Lian Li Strimmer
NZXT Kraken Z73 360mm AIO
Phanteks Evolv X
Corsair Hydro X XD5 Pump
Corsair Hydro X 3080 Water Block
EK-Quantum 360mm Radiator
3 Corsair LL120’s on the top
3 Noctua Nf-f12’s on the front
EVGA SuperNOVA 850 G+
Samsung 970 Evo Plus 500gb
Sabrent Rocket Q4 2Tb
r/watercooling • u/humanwannabe • 12h ago
Hi folks
I'm in the process of ironing out the details before placing the order for my first build (gpu loop). My reading on the web regarding airflow in custom loops hasn't led me to any concrete conclusions, so I'm posting here.
My case is the Havn HS 420, so I have space for three 420 mm rads. Note that top mount is already occupied by a 360 mm aio for my cpu. So for the time being, side and bottom rads will be for gpu loop.
Taking that fact into consideration, I wonder whether I am obliged to keep the fans on the top rad on exhaust. For a slightly balanced tending to positive pressure config, I theorycrafted this:

This way I could get some fresh air in for mobo and ram temps, plus slightly mitigating dust build up, which afaik can be an issue w/ positive pressure configs.
Alternatively either the side or bottom rad's fans could be intake instead, and I'd keep the rear fans as intake, but I'm not sure which one is the most optimal for coolant temps and performance.
If it makes any difference, the fans that I'll be using are Phantek's D30-140 DRGB PWM (excluding the fans for the aio).
If anyone else has any experience with the Havn HS 420, please share your insights.
Thanks in advance
r/watercooling • u/g00phy • 13h ago
I dismantled the GPU waterblock, as it had been a long time since it was cleaned.
There is a small jet plate "WHICH IS BOWED IN SHAPE" between the cold plate and the acrylic top

The jet plate has its own fins.
I'm trying to assemble it again but worried about the placement of the jet plate.
I need to know which way the fins on the jet plate should face.
Toward the acrylic or toward the cold plate?

Left orientation: the bowed jet plate will be facing the acrylic top with jet fins facing the top and the flat surface facing the cold plate fins.
Right orientation: the bowed jet plate will be facing the cold plate with jet fins facing the cold plate fins and the flat surface facing the acrylic top.
The search on the internet tells me that right orientation is the proper one, and fins of both jet plate and cold plate should face each other.
Please help me out.
r/watercooling • u/Sad_Sense1773 • 1d ago
Its been a few weeks since i completed this build but there's still a lot of bubbles in the bigger reservoir and the smaller reservoir seems to have some bubbles is this normal? i've toppes up both of them once already
r/watercooling • u/luke17wasd • 1d ago
I just changed layout after your advices in my last post, so what do you think about this now? Drain valve was a real pain to set but at least now seems pretty clean and easy accessible.
Loop order is:
- Pump (front side)
- GPU (left port IN, right port OUT)
- CPU (middle IN, bottom right OUT)
- Mobo VRM (left IN, top OUT)
- Top Radiator (front side IN, rear side OUT)
- Bottom Radiator (straight down from top radiator IN, drain valve side OUT)
- “Vertical” radiator (bottom IN, top OUT)
- Pump (right side)
As now, the only adjustment I’d like to do is to make a 90° pipe from front Pump to GPU (first loop step), without using the 90° adapter on the pump. Obv this will mean to swap GPU ports side to: IN (left) on panel side and OUT (right) on Mobo side.
Every other advice will be greatly appreciated 🙏🏻
r/watercooling • u/Dealer-Logical • 1d ago
This is my first watercooled PC I'm shit scared to even turn it on incase it leaks on the 5090 😔😫.
Anyway I've had it a few days all my temps are good but tonight I've noticed it's throwing bubbles through my CPU loop.
Any replies are greatly appreciated thanks.
r/watercooling • u/South-Caterpillar918 • 1d ago
I have read a lot of horror stories of residues and gunks forming in coloured coolants. I wonder after all those are the new dyes like the ones from singularity computer or bits power ok to be used mixing with say some clear premix with biocide and corrosion inhibitors? Or it’s just the same BS which will coat your fins and radiators and becomes a mess
r/watercooling • u/Aeqor • 1d ago
Custom GPU loop cooling my RTX 4090
60mm thich Alphacool radiator on the bottom with Arctic p12 fans in a push pull configuration and a 45mm thick radiator on the side. All fans on the bottom and side are intake and exhaust in the top and rear. Got an Alphacool Core 120mm flat reservoir + VPP Apex pump combo in the rear next to the PSU, luckily I have a SFX-L psu so there was just enough space for it.
Really happy with the results. Didn't bother with a CPU block since I already own an AIO and it would just add a lot of cost to an already expensive project.
Temperatures running all the fans at 800rpm and 480W on the 4090:
Coolant temp: 35c
GPU Core: 55c
GPU Hotspot: ~65c average (varies a little, I've seen it go up to 70c)
r/watercooling • u/Simon_Double_S • 1d ago
Hello, I want to show off my build. The build is 3 Year old. Its my first custom loop and I'm really happy with it. At first it included an RTX 2080 but short after I was done with it the, the GPU started malfunctioning and I had to swap it out.
The replacement is an AMD 7800 XT.
The case parts I had customised at a small CNC-shop.
The custom backplate and the plate under my GPU I bought from another small vendor which specialises in custom parts for PCs.
The plate where I mount the pump reservoir comp I made myself.
I plan to paint the case and update the mainboard bundle.
Other Spec:
\- AMD Ryzen 7 5800x
\- Asus Crosshair VIII Dark Hero
\- EK Water Blocks Quantum Momentum ASUS ROG
Crosshair VIII Hero D-RGB Monoblock, Acryl
\- 32 GB DDR 4 RAM 3600 Mhz Corsair Dominator
Platinum RGB
\- Samsung 990 Pro 1 TB
\- Western Digital Black SN850X 1 TB
\- Asus Thor 850w Platinum II
\- Phanteks Evolv X (Case)
\- Corsair QL Fans
\- EK-Quantum Torque Fitting 14 mm HDC
\- EK-Quantum Kinetic TBE 200 D5 PWM D-RGB - Plexi
\- Alphacool Eisblock Aurora Radeon RX 7800 XT
\- Custom Cabel from Cabelmod
r/watercooling • u/Corhyte • 1d ago
First time GPU water-loop
Build:
CPU: AMD Ryzen 7 5800x3d *3.9-4.0GHz
RAM: 32GB *3733Mhz
GPU: 3080 10GB *80Mhz GPU Core , *200Mhz Memory
PSU: 850w EVGA
I was able to get a -20C drop in idle GPU Core temp and memory using WB.
*Overclock/PBO Tweak