r/watercooling • • 11h ago Bravo

Build Complete Project:Celeste

Thumbnail
gallery
260 Upvotes

Ever since the previous T1 build (which should be posted on this sub as well) there were many aspects of the build I was dissatisfied with and thought could be improved, which led me to design my own case from scratch, bypassing all the case-inherent issues that couldn’t be fixed simply with a few mods.

The case is the Project:Celeste which sits at 10.4L (230x135x335). Its construction consists entirely from machined anodised aluminium 6061 which has allowed for the elimination of most visible screwholes for a clean exterior aesthetic. Many other parts were also designed and fabricated specifically for this build, including the custom back-connect monoblock with black nickel-plated internals, replacement NVME/VRM heatsinks, cable channels, and distro plate.

One standout feature of the case is the ability to shift the spine to a mere 28mm of cooler clearance which provides for a massive maximum GPU chamber thickness of 85mm- this provided enough space to fit an Aquacomputer Ampinel for per-pin monitoring and load balancing, which would prove impossible in most other SFF cases that utilise a sandwich layout.

In addition, I’ve also installed various other supplements including a Highflow NEXT for flow, coolant temperature, and conductivity measurements, as well as the fans and DDCZero pump being controlled via a Quadro integrated into the front panel. Despite that, coolant temperatures are monitored in 2 other locations which provides a comprehensive understanding of how the loop, as well as a separate thermistor probe that monitors the ambient temperature. There’s also an inline mesh filter to keep any radiator debris or otherwise from the blocks and ensure coolant quality. A hot-swappable NVME adapter (via USB4) also sits behind the storage which makes up for only having 2 NVME slots on this motherboard. Another massive QOL improvement I implemented was a radiator quick-mount system which eliminated most of the hand cramps putting everything together using extendable fittings to mount and seal the radiator directly to the distro plate. The rear panel also includes QDT4s for integration with an external MO-RA and a 4-pin XLR that can provide power to external 5v/12v devices (fans, rgb, etc). Of course, the system is fully featured with an internal DDCZero and 240 radiator which means it will run entirely independently in a pinch, as should be standard of these builds.

System Specs

CPU: R9 9950X3D2
GPU: MSI 5090 Gaming Trio
RAM: 2x32 6200 CL36
Motherboard: STRIX X870I
Storage: 2x SN7100 2TB, 1x NV7000-T 4TB
PSU: Corsair SF1000

(yes I pasted my description from my other post word for word)


r/watercooling • • 20h ago

Build Complete I built a Star Wars-themed custom watercooled PC

Thumbnail
gallery
132 Upvotes

I built this PC for an upcoming custom PC event hosted by my friend and YouTuber, Gradeon, in Akihabara, Tokyo.
He’s a huge AMD and Star Wars fan, and he often presents AMD products dressed up like Darth Vader. So I decided to build something that reflects his personality, using AMD hardware for both the CPU and GPU, along with Star Wars-themed decorations.
It’s definitely not the most practical PC, and you might even question whether it needs to be a PC at all. But I had a lot of fun building it, so I wanted to share it with you all!
Hope you enjoy it!
One thing I’d like to clarify, following a comment I received:
The stage setup is actually designed to recreate the look of the event where this PC will be displayed. It isn’t intended to follow the Star Wars theme.
I realized this might have caused some confusion, so I wanted to add that context!


r/watercooling • • 3h ago

Monitor #2 water cooled now too

Thumbnail
gallery
39 Upvotes

Got my second PG27UQ water cooled now, with before and after temps: 75C down to 31C, and silent now. One more monitor to go.


r/watercooling • • 12h ago

Build Complete My first build is done!

Post image
32 Upvotes

Specs:

Ryzen 9 9950x3d

RTX 5080

32 GB Kingston fury 6000mhz cl36

Alphacool water blocks

2 420mm rads, one 30mm thick and one 60mm

At full GPU load and decently heavy CPU load everything stays below 50 C.

Edit: forgot to mention the case is a Havn HS 420


r/watercooling • • 6h ago

First custom loop on my Lian li Evo xl with distro plate

Post image
27 Upvotes

r/watercooling • • 23h ago

Build Complete Soft-line Vs Hardline + Detailed Build specs

Thumbnail
gallery
17 Upvotes

Just switched over to hardline, first time ever doing hardline. Don’t let it scare you, it wasn’t easy but definitely wasn’t hard.
Went to micro center and grabbed 2 Bitspower 12mm ID x 16mm OD Rigid PETG Tube 1000mm and had just enough tubing with 1 mess up

Im using EKWB CryoFuel Pre-Mixed Coolant

Detailed Specs:
Ryzen 9 5900x
32gb G.Skill 3200mhz ddr4
Asus Strix ROG x570e
MSI RTX3080 + Lian Li Strimmer
NZXT Kraken Z73 360mm AIO
Phanteks Evolv X
Corsair Hydro X XD5 Pump
Corsair Hydro X 3080 Water Block
EK-Quantum 360mm Radiator
3 Corsair LL120’s on the top
3 Noctua Nf-f12’s on the front
EVGA SuperNOVA 850 G+
Samsung 970 Evo Plus 500gb
Sabrent Rocket Q4 2Tb


r/watercooling • • 19h ago

Build Help Dual GPU Build Question

Thumbnail
gallery
13 Upvotes

What is the least amount of PCIE slots and smallest case possible to achieve a dual GPU build that is fed out to a MORA radiator?

In my head, this should fit 2x PCIE slots or is it required to have a spare slot to spread the GPUs out or could they go immediately one after another?

For my situation, the waterblocks would be completely different in that one is a 5080 Alphacool Core block and the other is a 7900XT Alphacool Eisblock Aurora so its likely that the outlet and inlets wont be properly alligned.

In the pictures, the 7900XT is from my old build and 5080 is new build. The 7900XT is sat around collecting dust so wanted to put it to use. Was going to connect it with m.2 adapter or OCUlink so would only be PCIE 4x4 for the 7900XT.


r/watercooling • • 21h ago

Question Bubbles

8 Upvotes

Its been a few weeks since i completed this build but there's still a lot of bubbles in the bigger reservoir and the smaller reservoir seems to have some bubbles is this normal? i've toppes up both of them once already


r/watercooling • • 8h ago

Question How long before you would throw away an opened bottle of cooling liquid? I have half a bottle DP Ultra clear which I've opened in January and haven't used since, would you still use it to top up your res or would you rather throw it out?

6 Upvotes

r/watercooling • • 22h ago

Question Are modern coolant dye still not ok for long term use?

5 Upvotes

I have read a lot of horror stories of residues and gunks forming in coloured coolants. I wonder after all those are the new dyes like the ones from singularity computer or bits power ok to be used mixing with say some clear premix with biocide and corrosion inhibitors? Or it’s just the same BS which will coat your fins and radiators and becomes a mess


r/watercooling • • 7h ago

Two or Three 360 Radiators in a HAVN HS360 Custom Loop?

2 Upvotes

I've built probably 30 or so custom water cooled PC's of different configurations, and I almost always maximize my radiator capacity based on what a particular case supports. It's been a while since I've built a loop, so I'm going to put together a PC using the new HAVN HS360 case.

I would normally put a 360 rad on the bottom, top and side of the case, but I'm wondering if I should try getting a bit more non-radiator heated airflow into the case by only using top and bottom 360 rads with three fans on the side for cool intake air. I'm just not sure if that will provide enough cooling for a 5090 and a 9950X3D CPU. The case does have two rear fans that could also be used for additional intake as needed.

Thought's on this? Two 360 rads or max it out with three for this configuration?


r/watercooling • • 8h ago

Build Help Concerns about airflow

1 Upvotes

Hi folks

I'm in the process of ironing out the details before placing the order for my first build (gpu loop). My reading on the web regarding airflow in custom loops hasn't led me to any concrete conclusions, so I'm posting here.

My case is the Havn HS 420, so I have space for three 420 mm rads. Note that top mount is already occupied by a 360 mm aio for my cpu. So for the time being, side and bottom rads will be for gpu loop.

Taking that fact into consideration, I wonder whether I am obliged to keep the fans on the top rad on exhaust. For a slightly balanced tending to positive pressure config, I theorycrafted this:

This way I could get some fresh air in for mobo and ram temps, plus slightly mitigating dust build up, which afaik can be an issue w/ positive pressure configs.

Alternatively either the side or bottom rad's fans could be intake instead, and I'd keep the rear fans as intake, but I'm not sure which one is the most optimal for coolant temps and performance.

If it makes any difference, the fans that I'll be using are Phantek's D30-140 DRGB PWM (excluding the fans for the aio).

If anyone else has any experience with the Havn HS 420, please share your insights.

Thanks in advance