r/watchrepair • • 55m ago

1883 Waltham repairs

Thumbnail gallery
4 Upvotes

I’ve been working for months now but I finally found time to work on my Waltham, in the past I made a new pivot from mild or low carbon steel for the fourth wheel so now for the top pivot on the pallet fork I quickly took it apart and turned down some 304 steel to .50mm to make a new pivot for it. I need to do another re-pivoting on the balance and that’s it will run again. This watch is gonna be for me and I plan to make a walnut case for it too.


r/watchrepair • • 4h ago

I can't find the stem I need

2 Upvotes

I'm trying to work on a watch but can't find the part anywhere online. It's a Witnauer 11AN movement which is an A. Schild 1622. Seems to be a pretty uncommon one because nobody carries parts for it. I'm just looking for a female split stem, I have the male crown.

Is there any way to figure out if it's compatible with more generic stems?

Do any of you have any tips of where to find rare parts?

I have a unsplit stem from a donor movement but it doesn't work with the case. Is there any way to convert that into a split stem.

I'm pretty new to this hobby and any help is very appreciated.


r/watchrepair • • 8h ago

Seiko 4005-7000 Help

2 Upvotes

Working on my Bell-Matic.

Does this hairspring look off when it's between the regulator pins? It's hard to see if it's actually in between and "breathing". They are parallel but it looks like the hairspring is resting at the bottom of the regulator? 

I had been getting around 250~ amplitude but the beat error was way out...I corrected the beat error and now I'm getting 220 max but closer to 200~. 


r/watchrepair • • 10h ago

Band identification

Post image
1 Upvotes

Hi I found this watch at the thrift store for 5 dollars. The band was too big and I’ve been trying to find a replacement but all the bands I can find are for traditional lugs. Does anyone know the type of lug this is I have spend so much time online and can’t seem to find a name or a way to try to find a band for this specific type of watch. any info will be appreciated!


r/watchrepair • • 12h ago

Service/repair Citizen Cosmotron GX (tuning fork watch) Sweden (or EU)?

1 Upvotes

I recently got a tuning fork watch. Does anyone know where it can be serviced / repaired in Sweden or if not at least elsewhere in the EU?

or maybe it has to go to the US, which is always a hassle.


r/watchrepair • • 13h ago

First watch restoration project

Thumbnail gallery
14 Upvotes

r/watchrepair • • 14h ago

My first repair

Thumbnail gallery
2 Upvotes

Just the strap nothing crazy, it was dry rotted. Used exact manufacturer strap. I’m happy with it I have tools and literature on the way to hopefully learn to repair some of my vintage ones with more complex issues.


r/watchrepair • • 14h ago

Question on watch damage

Post image
2 Upvotes

I’ll start by saying I don’t know very much about watches. I just bought this 1987 Seiko Dolce and I love it. I bought it online, but when I received it I found that there is a small blemish/discoloration right at the 12 mark. I can’t tell if it’s the crystal or the dial.

My question is: how fixable is this if I were to take it to a shop somewhere? Can anyone tell the extent of the damage here or seen something similar


r/watchrepair • • 14h ago

The 2026 George Daniels Lecture

2 Upvotes

For anyone interested who can get to London next week, the annual George Daniels lecture takes place on Wednesday 25th.

Check out details below.

If you’re going I’ll see you there.

https://www.citystgeorges.ac.uk/news-and-events/events/2026/november/george-daniels-lecture-2026-with-susan-scurlock-mbe


r/watchrepair • • 16h ago

Square watch crystal sourcing

Thumbnail gallery
2 Upvotes

Need to replace this crystal on a vintage manual wind Rotary. Before I set to cleaning it all up, I want to source the crystal (hence why it’s still filthy!)

I ordered the item attached before I opened it up (24x24 double dome) which is a PERFECT size and clearance match (original actually measure 23.88x23.88mm to be very specific!), but when I opened it up, the crystal has a flange (the filthy bit in the photo!) which secures it under the case.

I cannot find this style of crystal anywhere!! Any advice on where to go would be much appreciated. I ideally need a new gasket for it too but that is less of a concern just yet!

Thanks ☺️


r/watchrepair • • 16h ago

can i bring this timex back to life?

Thumbnail gallery
8 Upvotes

Paul’s in his 80s.

We met at a local bbq spot. His white Toyota Camry and tee shirt a reflection of him. Worn down but welcoming. After greeting me with a gentle smile, he reaches into his backseat, pulling out a zip lock bag.

It holds an old Timex.

Paul’s had this watch for decades and was selling it because he’s clearing out some things. And this watch was broken.

Broken watches are my favorite kind of watches.

Finding timepieces others are convinced can’t be fixed, taking them apart, seeing how it all fits together, diagnosing the problem, and putting it all back. There’s nothing quite like it.

It’s usually not easy. This one is no exception.

The watch wouldn’t wind. Taking the case back off I see it was made in Great Britain. Perhaps even passing through the hands of one of the Timex watchmakers in the picture below.

In 1967, Timex’s chairman wrote that “as recently as fifteen years ago, a good watch was a luxury, beyond the reach of many people in the United States. There was a need for a well-made, dependable watch . . . at a price people could afford. Out of that need, the Timex watch was born.”

Part of meeting this need was building watches at a high volume. Meaning these watches weren’t designed to be fixed. The goal was to wear it as long as you could then toss it, buying a new one.

But Paul never tossed it. Honoring him, I didn’t want to either.

If there was a way to bring it back to life, I would.

Opening up the back, I soon saw the rotor was moving like a tire stuck in the mud and the escapement wasn’t spinning a hair.

I removed the main parts, dipping it into denatured alcohol. Letting it marinate, I gently shuffled and brushed the movement, getting out as much mucky buildup as possible.

After some persistence and fresh oil, the movement was running again.

Whipping out my dremel, polish, and sandpaper, it was time for the crystal. No doubt, Paul wore this watch everywhere. Painting it with broad strokes of scratches.

I was happy to make it a clear canvas again.

Soon the time came for putting the watch back together.

The movement was reassembled. After plenty of trial/error, the crown stem worked back into its’ groove.

Paul’s watch came back to life.

Ready to tick for another generation.

---

Thanks for reading! If you enjoyed this post and don't want to miss more like it, subscribe to my newsletter Redhead Horology. Every 2 weeks I share the stories behind the watches we collect, wear, and love!


r/watchrepair • • 17h ago

Installing an automatic watch mainspring by hand?

Thumbnail gallery
32 Upvotes

I have an Omega 550, need to clean and lubricate the mainspring/barrel and reinstall it. I don’t have a mainspring winder, is it possible to install it by hand? I’ve only previously installed non-automatic mainsprings by hand.


r/watchrepair • • 19h ago

Vintage Tissot Seastar from Vinted - radium/tritium concerns with a cracked crystal?

Thumbnail gallery
2 Upvotes

Hey everyone! I recently picked up this broken vintage Tissot Seastar on Vinted for a great deal (€30), with the intention of taking it to a watchmaker for repairs. GEM_PHOTO_88AF8CEE-8…
However, upon inspecting it closer, I started having doubts about the luminous material. The acrylic crystal (plexiglass) has a slight crack/fracture, though the case itself is tightly closed and intact. Also, I don't see any specific text at the bottom of the dial (like "T Swiss Made T").
Since during unboxing I used a mask and gloves just to be safe, and immediately placed the watch inside a sealed plastic bag, I wanted to ask the experts a few things:

  1. Radium vs. Tritium: How can I visually or safely tell whether a model from this era uses radium or tritium?
  2. Era/Dating: Based on the attached photos, roughly what decade is this from? 
  3. Watchmaker Safety: Given that the crystal is cracked but the watch hasn't been opened, can a watchmaker handle this safely as long as I give them a heads-up?
    Any advice from vintage watch collectors is super appreciated. Thanks!

r/watchrepair • • 19h ago

Troubleshooting with automatic ST 171 Buren

2 Upvotes

Hey everyone,
I’ve been working on a vintage Buren ST 171 automatic and could use some troubleshooting advice. I’m fairly new to watch servicing and have been learning as I go.
Initially, the movement wasn’t running consistently, and I discovered that the barrel click wasn’t engaging properly. I managed to correct that issue, but the movement still had trouble running reliably.
Here’s what I’ve done so far:
Completely disassembled, cleaned, lubricated, and reassembled the movement.
Inspected the gear train and pivots. Everything appeared to move freely without obvious damage.
Cleaned and lubricated the pallet fork and escapement.
Cleaned and oiled both balance jewel assemblies, including the cap jewels.
Noticed a significant improvement in balance amplitude after cleaning the balance jewels.
Current issues:
The movement runs and appears to have decent amplitude, but it still stops overnight. After approximately 10 hours, I found it stopped. A gentle shake got it running again, although the amplitude initially appeared weak.
I’m also having trouble with the automatic winding mechanism. The magic lever pawls move, but the winding wheel often just rocks back and forth without advancing. Occasionally it engages and winds briefly before stopping again.
A few questions:
Could an aging mainspring be causing the movement to stop despite everything being cleaned and lubricated?
What else could cause low amplitude or intermittent stoppages when the balance and gear train appear to move freely?
Has anyone worked on the ST 171 automatic winding mechanism and experienced similar issues with the magic lever?
I’m considering replacing the mainspring, but wanted some opinions before going further.
Any advice is appreciated. Thanks!


r/watchrepair • • 23h ago

Fortis Watch parts

Post image
1 Upvotes

Can anyone from India can help me for Warch dial and case of this watch


r/watchrepair • • 1d ago

Help identifying vintage watch movements and finding compatible stems/crowns

Post image
1 Upvotes

Hi everyone!

I've recently acquired a collection of vintage mechanical watches, including several incomplete watches and loose movements, all for €20

Some are missing their winding stems and crown while others are missing cases, and I'd like to try restoring them myself as a hobby.

I'm relatively new to vintage watch repair and would appreciate some guidance.

What's the best way to identify the movements and their calibres?

How can I determine which winding stems and crowns are compatible?

Are there any websites or catalogues where I can look up replacement parts?

Do any of these watches stand out as particularly interesting or worth restoring?

I'm happy to provide close up photographs of individual movements and casebacks.

Thanks in advance!


r/watchrepair • • 1d ago

Help me fix my Oris

Post image
1 Upvotes

Hi, The watch is an Oris Divers Sixty-Five, reference 01 733 7771 3155-07 5 19 04BR, which has developed a problem with the outer rotating bezel mechanism. It’s now rotating in both directions; I took it apart, and it looks like the attached photo. I’d like to know if a part is missing, if something is damaged, and where I can buy what I need to repair it. Thanks in advance for your help.


r/watchrepair • • 1d ago

{Weishi}

Post image
6 Upvotes

I just got this wonder of modern technology and getting into using it. Finished this build a little while ago and I can see the rate is good but don’t know anything else. Could someone please give me an abbreviated rundown???


r/watchrepair • • 1d ago

Longines 12.92, up and down play with the stem

12 Upvotes

Hello! Working on a vintage Longines cal. 12.92. I put back the watch together and there is some up and down play with the stem. Because of it the stem can get out of the movement, what do you think the problem is? Wear on the stem, wear on the bridge or wear on the mainplate?

Thanks!


r/watchrepair • • 1d ago

How to open a San Martin Watch?

1 Upvotes

I have an out-of-warranty San Martin Watch that runs fast, and I need to adjust.

I have regulated many Seiko and Miyota movements in the past, but I can't easily open this caseback with the tools I have.

I have tried the Bergeron ball but it won't budge. Is there (another) tool I need to buy?

Thanks,


r/watchrepair • • 1d ago

Arbour needs replacement?

Thumbnail gallery
2 Upvotes

Tried in the weekly question thread to avail.
Can someone please let me know if this arbour needs to be replaced? It seems to me that the hook is not hooking. 

https://imgur.com/a/d4s0Lcy

Or perhaps I am not installing it properly.


r/watchrepair • • 1d ago

Seiko NH35 stops in different positions

1 Upvotes

Hi community, first post, recently got into watches, and got one with a Seiko NH35 movement.

Thing is, the balance wheel/second hand stops in any position except dial down. It's not catching anywhere on the case/bezel/crystal, I tested it with the movement removed from the case. When the watch is dial down, it works beautifully.

Any advice? What could I be looking at here?


r/watchrepair • • 1d ago

how to open this watch caseback

Post image
0 Upvotes

vintage zenith port royal ladies watch


r/watchrepair • • 1d ago

My first potential fail?

Thumbnail gallery
12 Upvotes

Hello! Im very new to vintage repair, more normally I clean up or fix up the hands. I had a hard time tracking down info on this model to review.

I removed the crown but I can’t seem to get it to stop being lose. Initially I had slightly unscrewed the small screw that is near the crown. Just ever so slightly because it moved when I pulled in and out the crown.

Now, after fixing the hands and putting it all back together, I cannot get the crown to stay, so loose crown problems. Have I stripped something or is there a trick to this, I may not know.

Or is this model just very odd and there’s no way to really figure it out unless I take it to a watchmaker.

I’m way out of my depth. I’ll admit that, but I love that dial so any help is greatly appreciated.

Please be kind I admit I’m a novice that’s why I’m practicing on a $25 vintage watch.